EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCBP36DM1WW General Electric Range - Instructions

All Instructions for the JCBP36DM1WW
76 - 90 of 241

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Easier than cookig a TV dinner.
3 of 4 people found this instruction helpful.
  • Robert from olive branch, MS
  • Really Easy
  • Less than 15 mins
  • Nutdriver
UNPLUG the oven. Following what every else was doing, I removed the element first, then disconnected the contacts. The leads on the contacts are not overly long, so I found myself removing cover on rear of oven when reconnecting red and yellow wires. Required removing two more screws with nut driver. Should I have to replace another elem ent, I would remove rear cover first, unplug wires from element, remove element. Reverse procedure with new element.
While waiting for new element, be careful when turning on stove top element. Don't turn on oven by mistake, and when you do it, turn it off as fast as you can.
If you use stove top while waiting for part, don't forget to UNPLUG the oven. Won't be but a day or two. Very happy customer.
Was this helpful?
Thank you for voting!
old drip pans rusted
3 of 4 people found this instruction helpful.
  • noreen from torrington, CT
  • Really Easy
  • Less than 15 mins
I unplugged the burner, lifted the old drip pan out, put new drip pan in, plugged burner in. The stove looks brand new and it took less than 2 minutes.
Was this helpful?
Thank you for voting!
burner not work
3 of 4 people found this instruction helpful.
  • SILVIA from Midlothian, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Fue muy facil desconectar primero la estufa despues quite los tornillos de la parte superior detras de la estufa, desconecte un cable del switch y lo conecte en el nuevo despues el siguiente hasta conectar todos los cables en el nuevo switch. Lo mejor es desconectar uno por uno para mo mesclar los cables , despues removi el switch de la e stufa y puse el nuevo , puse las partes de regreso y listo conecte la estufa t revise si funcionava el quemador y listo sin ningun problema.
Was this helpful?
Thank you for voting!
Cleaning oven latch engaged while pizza was cooking
3 of 5 people found this instruction helpful.
  • Jeffery from Victor, ID
  • Easy
  • 15 - 30 mins
  • Nutdriver
In a panicked state, my roommates and I could not turn the cleaning setting off. So, we "Jerry-rigged" the door open to save the house from the awful burning pizza smell and potential fire. We removed the stove top with the nutdriver only held in with three nuts. Removed the insulation promptly after. Disassembled the latch mechanism wi th the star wrench set. The scariest part of the replacement was looking confused at the new part. To our dismay, the part looked grossly under sized. we thought it would not fit. After placing the part in place of the broken latch we found the replacement fit better than the previous and was a totally painless success. Do-it-yourself, not that complex and an excellent way to save money.

_Jeffrey B.
Was this helpful?
Thank you for voting!
Oven would shut down while baking. Stove top would work.
2 of 2 people found this instruction helpful.
  • Tom from ELIZABETHTON, TN
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Replaced Electronic Control Board. Very easy to do with a nut driver and a screw driver to remove the old one. You may need a pair of needle nose pliers to remove Connector TB100 and TB101. Just squeeze the bottom of tabs to release connector. I also found that in the process of removing the Control Board label that it may rip in certai n areas even while using a razor blade, so be prepared to purchase a craft paint brush and craft white paint to touch up the back of the label. It took 2 coats but looks like new..

The replacement Control Board works as advertised and I now have my oven working again. Save yourself the cost of a Service Company coming into your home just be prepared to do a bit of painting on the old label because it is really glued down and the new control board does not come with a new label.
Was this helpful?
Thank you for voting!
Oven would not get come up to temperature
2 of 2 people found this instruction helpful.
  • Arthur from INDIANAPOLIS, IN
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
I knew I had a bad control board. Using the repair videos, replacing this part was very easy to do. While I was at it, I replaced my oven temperature sensor. as well, and even though it wasn't bad, I replaced my oven heating element so that I could get some more mileage out of my 14-year-old range. The issue: after completing my repair ac tions, my oven element still would not heat. I double-checked my connections and I discovered I hadn't ensured one of the wires on the control board was properly seated. This was one of the wires that go to the heating element. After ensuring proper connection, everything worked perfectly!
Was this helpful?
Thank you for voting!
Oven could not be turned off once settings were turned on except by unplugging hookup.
2 of 2 people found this instruction helpful.
  • Charles from BENNETTSVILLE, SC
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Took back cover panel off (upper) and removed the 4 1/4 inch nut screws. Used nut driver and removed the 4 screws holding control panel in place. Put new panel in place and unhooked electrical connections and installed on new panel. Plugged stove back in and checked operation. All OK, so then put back cover on and everybody is happy.
Was this helpful?
Thank you for voting!
Drawer sticking and not operating smoothly
3 of 5 people found this instruction helpful.
  • Bill from Philadelphia, PA
  • Easy
  • Less than 15 mins
  • Screw drivers
I was so sick of this drawer and I over heard a buddy telling a story about a website that you can get ANY piece for appliances. I take the drawer out, look up the website (partselect.com) look at the appliance diagram and find the missing piece. Order it, get it, install it. My wife thinks I'm a hero and I think I'm pretty cool too.
Was this helpful?
Thank you for voting!
Drawer support broke
2 of 2 people found this instruction helpful.
  • Charles from BOULDER, WY
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Remove drawer by pulling out and lifting up so drawer will slide out of range. Use 1/4 inch Nutdriver or socket - remove the screw that holds the drawer support to the body of the range. Remove support and install new one with screw Pay attention to the way the support fits. There are two holes one for the screw and the other for the plas tic prong on the bottom of the support. The prong fits in the bottom hole and the screw in the above hole.
Was this helpful?
Thank you for voting!
Replace Thermostat
2 of 2 people found this instruction helpful.
  • Russell from Morgantown, WV
  • Really Easy
  • Less than 15 mins
  • Socket set
Pull oven out away from the wall, unplugged from outlet, removed center cover by removing 5 sheet metal screws. disconnected thermostat sensor from control cable. Opened oven door and removed screw that holds thermostat sensor. Pulled thermostat sensor out replaced with new sensor. Plugged sensor in to control cable. Replace panel and scr ews. Then my wife made me clean the oven. I recommend making the repair when your wife is not home.
Was this helpful?
Thank you for voting!
Defective switch
2 of 2 people found this instruction helpful.
  • Mary from EDENTON, NC
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Replaced element control switches
Was this helpful?
Thank you for voting!
Stove was not getting enough power.
2 of 2 people found this instruction helpful.
  • Nathan from Wells, ME
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
My stove didn't seem to be getting enough power for the oven to heat up and the burners to get hot enough. When I checked the connection of the electric cord I found that one of the 3 terminals that the plug connects to was broken off. When the new part came I removed the old part by first disconnecting the 3 wires [black,white(ground),r ed] and then using a small but long 1/4 socket (that I found at Lowes)I removed the 2 screws that held the old part to the stove and the green screw under it holding the flat copper piece that also connects under the white ground wire of the part. I mounted the new piece on with the 2 1/4 screws. The new part comes with a piece of copper that is for grounding the part to the stove. When I compared it to the old part it was a little different. I first screwed the copper piece onto the stove (under the part) with the green screw then I screwed the white wire over the copper piece to the center terminal(you have to make the hole of the copper piece line up to the screw hole). I connected the other 2 wires and then connected the electric cord to the new terminal block and then put the back cover back on the stove and plugged it in. The clock came on I turned on the four burners they all got hot and red. I turned on the oven the element on the bottom got red I then turned on the broiler the top element got red. My stove is fixed.
Was this helpful?
Thank you for voting!
Stove overheated with an F2 error
2 of 2 people found this instruction helpful.
  • Richard from PHOENIX, AZ
  • Easy
  • 15 - 30 mins
  • Nutdriver
Removed screws holding temp sensor, pulled wire out from behind wall until found connector, disconnected old sensor.
Measured resistance of old sensor and compared with new sensor, they measured nearly the same. Installed the new sensor and tested the stove. Came up to temp ok. No problem since, about 2 weeks.
Was this helpful?
Thank you for voting!
Just didn't work no pwr to it
2 of 2 people found this instruction helpful.
  • Jerry from HOPEWELL, VA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Killed braker first, removed four screws from back, then unplugged all the wiring, then removed four screw that hold the unit on stove, pealed off the face decal, put that on the new on and just reversed the take off press.
Was this helpful?
Thank you for voting!
Oven temp wouldn't regulate.
2 of 2 people found this instruction helpful.
  • Ronald from Crumpler, NC
  • Very Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Followed the directions!
Was this helpful?
Thank you for voting!
All Instructions for the JCBP36DM1WW
76 - 90 of 241