EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FEF389CFBA Frigidaire Range - Instructions

All Instructions for the FEF389CFBA
106 - 120 of 706

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Element burnt out and cracked
2 of 2 people found this instruction helpful.
  • Robert from LOUISVILLE, KY
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
I simply followed the instructions in your video. i shut down the power to the oven via the breaker panel, removed the two quarter inch screws with a nut driver, pulled out the old element exposing the two wire leads,disconnected one lead at a time and duct taped each lead to the oven wall,. Then removed the old element and replaced th e new one in reverse order. Voila! It works great. This is the second element I replaced in this oven over the years. This site was prompt on shipping the new element (about 3 days since I ordered on a Sunday).. It was well packed and arrived on time and I even got an e-mail letting me know it arrived! How cool is that?! I've been a customer for a few years now and plan to be a "forever" customer. Thanks for saving the day! You ROCK!
Was this helpful?
Thank you for voting!
Oven bake element failed.
2 of 2 people found this instruction helpful.
  • Gerald from PALM COAST, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver
I watched the video of the repair. It was very easy; removed 2 screws; disconnected 2 push-on tabs; removed the element; and then reversed the operation. Be sure to turn off the circuit breaker that powers the oven before you start the repair. Turn it back on when finished and test the oven.
Was this helpful?
Thank you for voting!
Bottom oven element non-functional
2 of 2 people found this instruction helpful.
  • Louis from GAINESVILLE, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Shut off power - throw breaker. Oven access easier with door removed - requires removal of two Phillips head screws. Remove two screws holding element in place using 1/4" socket. Pull element & wires out and pull slide in connectors out (had to hold the wire end with needle nose pliers}. Installed element by reversing the removal proc edures. Also good time to clean oven.
Was this helpful?
Thank you for voting!
bake element burnt out.
2 of 2 people found this instruction helpful.
  • james from WOOTON, KY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed screws,unplugged terminal leads,installed new one,back in business.
Was this helpful?
Thank you for voting!
Inner oven glass broken
2 of 3 people found this instruction helpful.
  • Donald from Freedom, PA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
I removed the oven door using a phillips screwdriver. It was very easy because I didn't have to worry about the door hinges springing the door back. I'm not really handy and it went very easy.
Was this helpful?
Thank you for voting!
Bake Element burned in to stopped working
2 of 3 people found this instruction helpful.
  • Debbie from Mineral Wells, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Turned off power to appliance removed the screws connecting the element. Disconnected the wires from the old element connected the new element replaced the screws and tightened turned power on turned power back on heated oven to be sure it worked. Very simple to do.
Was this helpful?
Thank you for voting!
bake element burnt out
2 of 3 people found this instruction helpful.
  • Kim from Union Grove, WI
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I looked for the proper part on this site. I was even able to find a video on how to install the part. It was great to see the step-by-step directions and tools needed. I ordered the part. It came quickly so that I was able to get my oven repaired before my kids came home for spring break. The only problem I had was the old screws were re ally stuck on. I used some WD-40 and they were still quite stuck. I learned that by gently going back and forth with the nut driver, rather than just trying to turn in the correct direction, that the screws came out quite easily. I felt so proud to be able to fix my own stove and save money in the process! Very satisfying for a single mom. Couldn't have done it without the video directions.
Was this helpful?
Thank you for voting!
Broken Inner Door Glass Panel
2 of 3 people found this instruction helpful.
  • Michael from Bowie, MD
  • Easy
  • 15 - 30 mins
  • Screw drivers
First, I read about the experiences of others who did this repair.

Then I removed the oven door by removing the single screw at each hinge - visible when the door is open - using a #2 Phillips screwdriver (the only tool needed for this repair). I placed the door on the kitchen table and removed the two screws at the inside t op of the door - they also hold the handle onto the door.

I placed the four screws removed from the inside corners of the door -- into one corner of a tray I used to hold the parts in order. Then I removed the eight screws from the perimeter of the door and placed them into another corner of the holding tray. Then I turned the door over and removed the outside part of the door from the inside - as in removing the cover from a box.

Then I removed four screws holding the middle and outside glass panels and placed them in another corner of the parts tray. Then I removed two screws holding the steel panel against the glass. Then I removed the broken glass from the bottom of the tray. That's when I discovered I had ordered the wrong glass panel.

I called the PartSelect number to return the glass, and while discussing how to return the part, I asked if I had to call another number to get the correct part. The lady assured me she could process my order for the correct part. She was very knowledgable about the system and quickly found the correct part from the schematic. I received the replacement part 24 hours later and installed it within 20 minutes.

Overall a success story. Excellent service and easy work.
Was this helpful?
Thank you for voting!
Bake element wouldn't heat.
2 of 3 people found this instruction helpful.
  • Earl from Elkin, NC
  • Easy
  • Less than 15 mins
  • Nutdriver
The problem was caused by the owner placing an aluminum catch pan under the bake element. The failure of the element was where it was in contact with the pan. The repair involved removing two screws pulling out the element to access the wires. The connectors were the pull off type so I just disconnected the wires from the old element and placed them on the new element, pushed the element back in place and replaced the two retaining screws. I suggested that the owner not place anything in contact with the bake element. Be sure to up-plug the stove plug before attempting repair.
Was this helpful?
Thank you for voting!
lens was broken
2 of 3 people found this instruction helpful.
  • Kenneth from Coeur d'Alene, ID
  • Really Easy
  • Less than 15 mins
after pulling away from wall and unplugging remove 5 screws in upper back panel lift off being careful of sharp edges if part of lens is still in hole push it out towards the front insert lens from front of unit slide light assy over pin on back of lens replace back panel plug in range push back against wall check for level you're done
Was this helpful?
Thank you for voting!
Bottom bake element went bad
2 of 3 people found this instruction helpful.
  • James from Martinsburg, WV
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Remove the 2 nuts holding the element in place. Pull the element out slightly to expose the wires. each side of the element has a wire. Slide the wires off. Replace new element. attach wires and pu the 2 screws back in the element holders.
Was this helpful?
Thank you for voting!
Oven bake element was dead
2 of 3 people found this instruction helpful.
  • Stephen from Spencer, IN
  • Really Easy
  • Less than 15 mins
  • Pliers, Socket set
Turned off range/oven breaker. Opened the oven door. Removed two 5/16 hex head screws. Pulled bake element forward and removed the two slip on electrical connections from old bake element and put them on the new one. Replaced the two screws, closed the oven door, and proceeded to overhaul the kitchen faucet.
Was this helpful?
Thank you for voting!
Oven lower element broke
2 of 3 people found this instruction helpful.
  • Peggy from Owensville, MO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Take the screws out of the inside of oven for the element and slide the oven away from way and remove the back and insert the element to the clips and screw the back of the oven back together and plug in again and push back in place. Very easy for my husband to repair.
Was this helpful?
Thank you for voting!
Element did not heat
2 of 3 people found this instruction helpful.
  • Susan from Iowa City, IA
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench set
After doing without the oven for a week or so we decided to turn to the internet and try doing the repair ourselves. We are not mechanically inclined/fix it yourself kind of people. This really was easy. Just detach the old element and attached the new one. A couple of bolts and snapping one out and then the new one in. Very simple
Was this helpful?
Thank you for voting!
heating element stopped working
2 of 3 people found this instruction helpful.
  • Kevi from Verona, WI
  • Really Easy
  • Less than 15 mins
  • Wrench set
All I had to do was loosen the screws, pull out electrical hookup on both ends, hookup new heating element to elecric and screw em into place. That's it, super easy and I got the part in 2 day : )
Was this helpful?
Thank you for voting!
All Instructions for the FEF389CFBA
106 - 120 of 706