- Home
- FEF389CFBA
- Instructions
FEF389CFBA Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven Bake Element burned up and broke
2 of 3 people
found this instruction helpful.
-
Robert from Hopkinsville, KY
- Really Easy
- Less than 15 mins
-
Nutdriver
this bake element has two special Hex style screws, securing it in place, but a nut driver worked just as well. remove the baking racks, and then loosen the two hex screws. slowly pull the element out of the back wall and then disconnect the electric leads. reinstall by doing then the opposite action. could not have be simpler.
Was this helpful?
Thank you for voting!
Lacking oven racks on used appliance
2 of 3 people
found this instruction helpful.
-
Katherine from Roanoke, VA
- Really Easy
- Less than 15 mins
Your website is great...easy and it literally took me no mote than 5 minutes to find what I needed and order...and received it VERY quickly. Must say I was dreading going to some parts house that we have in our town in bad area, and searching on dusty shelves for what I needed...am so glad I found you!!
Was this helpful?
Thank you for voting!
bake element broken
1 person
found this instruction helpful.
-
Michael from Browns Mills, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
turn off power to oven at breaker box
remove screws holding bake element in
pulls wires off old element
put wires on new element
put the screws back in
turn the power back on
remove screws holding bake element in
pulls wires off old element
put wires on new element
put the screws back in
turn the power back on
Was this helpful?
Thank you for voting!
While baking cookies I looked in the oven only to find the bake element was glowing white on the curve of the element, then a second spot started to burn. The element was fried.
1 person
found this instruction helpful.
-
Angela from Ruidoso, NM
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
The repair took less time than finding the model number. After unplugging the range and allowing it to cool I disconnected the element (2 screws), went online and found Part Select ordered the element and saved $16.00 dollars over the least expensive local shop, I was amazed at how fast the element arrived, I believe it was 4 days from or
... Read more
der to my door. I went to my local hardware store for some new connectors for the wire, put them on and plugged in the element fastened down the two screws and went back to baking cookies. The element was well and safely packed and came in perfect condition. It works like a charm. Thank You
Read less
Was this helpful?
Thank you for voting!
bake element had stopped working
1 person
found this instruction helpful.
-
lynne from pelham, NH
- Easy
- Less than 15 mins
-
Pliers, Socket set
My husband had recently moved out of our house so I was very nervous about trying this repair myself but it was actually very easy!!I ordered the part on Monday, it arrived on Wednesday and Wednesday night I was baking dinner in the oven!!
Was this helpful?
Thank you for voting!
oven not heating up
1 person
found this instruction helpful.
-
raymond from irvine, CA
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
ordered new heating element, arrived promptly as expected, compared new heating element to old one and it matched in size only diameter a little different, removed two sheet metal screws holding element in place and pulled out element to expose conductors and removed them with screwdriver. Installed conductors on new heating element slid
... Read more
into holes and installed screws, turned power back on(first step is to turn off power) turned on oven to preheat and she worked like a new one. Thank you PartSelect. Saved me a bundle,
Read less
Was this helpful?
Thank you for voting!
The bake element had burned out.
1 person
found this instruction helpful.
-
Donise from WILLINGBORO, NJ
- Very Easy
- Less than 15 mins
-
Screw drivers
I followed the instruction on the web site and the installation was just like the instruction. Very quick and easy. I was so happy and now I am baking up a storm again.
Was this helpful?
Thank you for voting!
Fried baking element
1 person
found this instruction helpful.
-
Jeff from wilmington, DE
- Really Easy
- Less than 15 mins
-
Nutdriver
Unplugged stove, removed screws holding element In place. Pulled element forward exposing electrical ends. Removed connectors, re- connected ends to new element. Pushed element back into holes and reconnected the screws. Plug stove back in.
Was this helpful?
Thank you for voting!
Broken element
1 person
found this instruction helpful.
-
Steven from ROCKVILLE, MD
- Very Easy
- Less than 15 mins
-
Socket set
Simple installation took 2 minutes to do...pop on the connectors, screw each end into back of oven...DONE.
Was this helpful?
Thank you for voting!
Burned out bottom oven element
1 person
found this instruction helpful.
-
Scott from ALBANY, OR
- Very Easy
- Less than 15 mins
-
Nutdriver, Socket set
Undid 2 screw nuts holding the element to the back wall, with a 1/4" socket. Pulled off the two wires, pushed them onto the new element. Screwed the two nuts back on the rear wall. Done! Easy, worked 1st try.
Was this helpful?
Thank you for voting!
element burned out
1 person
found this instruction helpful.
-
Nancy from Prosser, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
unfastened clip at back of oven w/screwdriver. Pulled out the plug, unplugged the element. Plugged in new element, pushed back into place, refastened clip to hold it in place at back of oven.. Done
Was this helpful?
Thank you for voting!
Oven did not heat
1 person
found this instruction helpful.
-
Edward from MILTON, PA
- Very Easy
- Less than 15 mins
-
Nutdriver, Pliers
I watched your how to video and used my voltmeter to check my baking element. I found it defective and ordered your replacement. 5 or 6 days later it arrived in the mail. I installed it per the video and my wife baked a pizza to try it out. Perfect! Thank you.
Was this helpful?
Thank you for voting!
oven not heating
1 person
found this instruction helpful.
-
janet*hubbard from Old Town, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
slid the old one out and slid the new one in.turned the unit on and it works
Was this helpful?
Thank you for voting!
Oven wouldn't heat
1 person
found this instruction helpful.
-
KaShira from Wilmington, OH
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband removed the screws and took out the heat element and when we received the new heat element in 3 days (thank God!) My husband put the new part in the oven and replaced the screws!! Total repair time was about 5 mins!!!
Was this helpful?
Thank you for voting!
Second replacement of switch that disintegrated with minimum normal usage.
1 person
found this instruction helpful.
-
Donnel from COEUR D ALENE, ID
- Really Easy
- Less than 15 mins
Removed old switch, moved the one wire to the same pin on new very cheaply made but expensive made in Mexico switch, replaced switch, pugged range back in too AC, operated new switch, created sparks and smoke. Element now glows to max immediately when turned on. Replaced stove problem gone!
Was this helpful?
Thank you for voting!