- Home
- FEF389CFBA
- Instructions
FEF389CFBA Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wires arced and caused the terminal block to melt and become detached from the back of the range
3 of 3 people
found this instruction helpful.
-
Daniel from Falmouth, MA
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Wrench set
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely.
Once all was replaced and reinstalled the oven ... Read more has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
Once all was replaced and reinstalled the oven ... Read more has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
Read less
Was this helpful?
Thank you for voting!
Bake elemen t shorted out.
3 of 3 people
found this instruction helpful.
-
LARRY from LEES SUMMIT, MO
- Really Easy
- 30 - 60 mins
-
Screw drivers
Turned off power to stove;removed baking racks , loosened Holden screws to pushon bake element removed old bake element,installed new pushon bake element.
Was this helpful?
Thank you for voting!
Burnt out baking element
3 of 3 people
found this instruction helpful.
-
Joseph from HAMPTON, VA
- Really Easy
- 15 - 30 mins
-
Nutdriver
Removed the back panel, disconnected the terminals and removed the old one and installed the new one.
Was this helpful?
Thank you for voting!
Broken glass inside door of oven
6 of 12 people
found this instruction helpful.
-
Janice from Brooklyn, NY
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
First took apart oven door. then took out broken glass and replaced with new glass.Put everything back together done.
Was this helpful?
Thank you for voting!
Right rear burner not working properly
3 of 3 people
found this instruction helpful.
-
Dante from SOUTHOLD, NY
- Difficult
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
After a brief discussion with CS about the electric stove part was shipped it arrived and I proceeded to install I found it needed to be installed sideways not up & down like the old one. The terminals did not line up so I put the black lead first and the purple lead last in doing that I burned out the switch??? was not easy to install as
... Read more
the video showed his switch matched each wire? My installation was sideways??
Read less
Was this helpful?
Thank you for voting!
Broiler element burned out
3 of 3 people
found this instruction helpful.
-
Trisha from Shelbyville, TN
- Very Easy
- 30 - 60 mins
-
Screw drivers
Just took the old one out & put the new one in . Just a few screws to remove & put them back when replacing to new broil element , and were back up and cooking :)
Was this helpful?
Thank you for voting!
Bake element bad, broiler element OK.
5 of 10 people
found this instruction helpful.
-
Gerry W. from Oxford, IA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Unplugged the stove first !
Removed bake element ; (2 screws), looked OK,
measured with an Ohm meter, measured "open".
Also, removed rear cover (6-screws), wires not burnt. Ordered new element-rec'd next day! My wife installed it and replaced rear cover. Works great (oven!) and about $10 cheaper and quicker than from ... Read more a local dealer!
Removed bake element ; (2 screws), looked OK,
measured with an Ohm meter, measured "open".
Also, removed rear cover (6-screws), wires not burnt. Ordered new element-rec'd next day! My wife installed it and replaced rear cover. Works great (oven!) and about $10 cheaper and quicker than from ... Read more a local dealer!
Read less
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 people
found this instruction helpful.
-
Larry from COZAD, NE
- Really Easy
- 30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
Inside Oven Door Glass Panel Broke
3 of 4 people
found this instruction helpful.
-
Penny from Topeka, IL
- Easy
- 15 - 30 mins
-
Screw drivers
Got a copy of the parts breakdown for the oven door from partselect. Com. Removed 8 screws from outer frame (3 top, 3 bottom, 1 on eah side). Removed the main glass pane from oven door, be careful when doing this as this is most of the weight of the door. It will want close on its own due to lack of weight. Removed the 2 top screw
... Read more
s that attach the handle. Removed some screws from some plates that retain the 2 panes of glass of glass. Removed the third (most inner, broken) pane of glass. Replaced with new one. Reversed disassebly procedure for assembly.
Read less
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 people
found this instruction helpful.
-
Marilyn from Clearwater, FL
- Easy
- Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience
... Read more
with those in need of you services. Thanks. Marilyn Kasson
Read less
Was this helpful?
Thank you for voting!
Bake Element caught on fire
4 of 7 people
found this instruction helpful.
-
Judy from Spencerville, OH
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
First we turned off the electic, then we took the back off the stove and pulled the wire off the bad element then replace the new element. It was very easy to do.
Was this helpful?
Thank you for voting!
Burner switch work sometime.
3 of 4 people
found this instruction helpful.
-
junius from WICOMICO, VA
- Really Easy
- 1- 2 hours
-
Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
The inside glass on my oven was broken and falling out.
3 of 4 people
found this instruction helpful.
-
Taviatha from Dallas, TX
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
First I removed the oven door from the range by removing 2 screws from the door. Next I removed 2 more screws from the oven door to get to the panel beneath. Once the top portion of the door was removed there were 4 nuts holding the glass sections together. Once these nuts were out I removed the broken class, replaced it with the new g
... Read more
lass and reassembled. It was a very easy and quick project. I was so happy to find the part. I thought I was going to have to buy a new range. Thanks.
Read less
Was this helpful?
Thank you for voting!
The baking element developed hot spots and stoped working.
2 of 2 people
found this instruction helpful.
-
Jeremiah from Crawfordsville, IA
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
I removed the baking racks then unscrewed the default screws for the baking element.I then disconnected the electrical leads from the damaged element. I then removed the old damaged baking element and installed the new baking element, attaching the electrical leads after cheking for weak spots in the element. I then re installed the bakin
... Read more
g racks and started the oven to burn off any factory oils on the baking element.
Read less
Was this helpful?
Thank you for voting!
The oven went out, element wouldn't turn off.
2 of 2 people
found this instruction helpful.
-
Howard from McPherson, KS
- Really Easy
- Less than 15 mins
-
Nutdriver
It's a simple project. Remove old element and replace it with new one. Access is easy. Only one tool needed. What impressed me was how fast the part got here, like the next day after I ordered it.
Was this helpful?
Thank you for voting!