EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FEF389CFBA Frigidaire Range - Instructions

All Instructions for the FEF389CFBA
61 - 75 of 706

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The oven bake element developed a hot spot which failed shortly after the hot spot developed.
4 of 4 people found this instruction helpful.
  • Dave from BRISTOL, VA
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Unplug the stove or disconnect at the breaker. Open the oven and remove the bake racks. Using a nut driver (or Phillips Screwdriver) remove the screws (one per side) that secure the bake element. Place them in a safe/secure place outside of the oven. Carefully pull straight back on the element until about 3 inches of the wire, that connec ts to the element, is exposed. Carefully unplug the wire from each element (make sure that the wire does not pull back into the oven insulation. I placed a small metal clip on each wire). Remove the old element and plug the new one in. Put everything back in the exact same way you took the old one out. Power the oven up and preheat your oven. Monitor this - should be no problem at all. Very simple process. My first attempt at this and it was very easy.
Was this helpful?
Thank you for voting!
Lenses wore down and broke off making the actual indicator lights fall down behind the control panel since the lights connect to the lens.
4 of 4 people found this instruction helpful.
  • Charles from OMAHA, NE
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Pulled stove out and unplugged it.
Used a Phillips screwdriver to take the back cover off of the control panel.
Each of the 7 lights connects to the red Indicator Light Lens via a slide clamp which is attached to the front of the light assembly. All you have to do is slide the lens into the hole from the outside of the control p anel. Then with your other hand, pust the light assembly into the back of the lens and slide it to lock it in place. Repeat with the others.
Replace back cover.
Plug stove back in and slide back into place.
There are you tube videos out there to help you.
Was this helpful?
Thank you for voting!
The glass on the enter oven door was broken
4 of 4 people found this instruction helpful.
  • leslie from Pickerington, OH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
It went very well. Very quick. Just took out a couple of screws, took out the rest of the broken glass, slipped the new piece in and screwed it all back together. This was the first time I had ever tried to fix any part of a range/oven before, it was very simple...
Was this helpful?
Thank you for voting!
element burnt out
5 of 7 people found this instruction helpful.
  • Demoris from GOLDSBORO, NC
  • Really Easy
  • 15 - 30 mins
purchased a square bit and removed screws easily and disconnected it from the wiring and pushed in the new element secured screw and it was back to baking.
Was this helpful?
Thank you for voting!
Bottom burner wouldn’t heat
5 of 8 people found this instruction helpful.
  • cynthia from SEBRING, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench (Adjustable)
Watched the video
Was this helpful?
Thank you for voting!
Old racks had melted plastic on them.
4 of 5 people found this instruction helpful.
  • James from PAINESVILLE, OH
  • Very Easy
  • Less than 15 mins
It was a replace racks not repair. No problem
Was this helpful?
Thank you for voting!
The neon tube over the stove top went out
8 of 17 people found this instruction helpful.
  • Gunther from Columbia, SC
  • Really Easy
  • Less than 15 mins
Put a new one in.
Was this helpful?
Thank you for voting!
oven baking element burnt into
4 of 5 people found this instruction helpful.
  • Teresa from Marengo, OH
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Socket set
my husband did the repair.He unplugged the stove removed the element and installed the new element.plugged the stove in and checked operation of element.Stove works great
Was this helpful?
Thank you for voting!
replacing oven racks
4 of 5 people found this instruction helpful.
  • Lawrence from Elmira, NY
  • Really Easy
  • Less than 15 mins
The replacement racks were spot on and the service was outstanding. had the racks in 2 days. Happy Happy Joy Joy! :)
Was this helpful?
Thank you for voting!
Right rear burner not working properly
3 of 3 people found this instruction helpful.
  • Dante from SOUTHOLD, NY
  • Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
After a brief discussion with CS about the electric stove part was shipped it arrived and I proceeded to install I found it needed to be installed sideways not up & down like the old one. The terminals did not line up so I put the black lead first and the purple lead last in doing that I burned out the switch??? was not easy to install as the video showed his switch matched each wire? My installation was sideways??
Was this helpful?
Thank you for voting!
Broiler element burned out
3 of 3 people found this instruction helpful.
  • Trisha from Shelbyville, TN
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Just took the old one out & put the new one in . Just a few screws to remove & put them back when replacing to new broil element , and were back up and cooking :)
Was this helpful?
Thank you for voting!
Broken glass inside door of oven
6 of 12 people found this instruction helpful.
  • Janice from Brooklyn, NY
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
First took apart oven door. then took out broken glass and replaced with new glass.Put everything back together done.
Was this helpful?
Thank you for voting!
Cracked glass inside oven door -exposed to heat
4 of 6 people found this instruction helpful.
  • Marvin from Ventura, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers
I used good old commom sense to disassemble and reassemble the frame, handle, internal glass,and inter panel to reach and repace the cracked glass. I must admit I had two machine screws left over during reassembly, but found a home. It is important to identify where each and every screw belongs. This will cut down your repair time. I thank PartSelect for providing great service and assisting me in my time of need.

Marv Dixon
Was this helpful?
Thank you for voting!
the old bake element was corroded and non-funtional
5 of 9 people found this instruction helpful.
  • Stephen from RONAN, MT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Using a socket set and Robertson #3 (smallest) driver head,with the breaker shut off before working I removed the old element and disconnected the old element from the wire connections.I then installed the new element by connecting the terminals to the wire connection in the range before screwing the old retaining clips to the back of the oven compartment wall.Then I flipped the breaker switch back on and turned on the oven dial to 425 degrees to see the element heat up and glow red affirming the success of the repair.Total time to repair about 15 minutes.
Was this helpful?
Thank you for voting!
Repaired Oven Range Light Bulb
3 of 3 people found this instruction helpful.
  • Alan from SAN MATEO, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!
All Instructions for the FEF389CFBA
61 - 75 of 706