EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ESD3492H Caloric Range - Instructions

All Instructions for the ESD3492H
16 - 30 of 81

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burned out broiler element
3 of 4 people found this instruction helpful.
  • James from Matamoras, PA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
The repair went real easy. Turned off power, unscrewed two screws at back of oven and disconnected the two wires. Reconnected two wires to new broiler element and remounted the new one with the two screws. Turned the breaker back on and had a steak cooking in no time.
Was this helpful?
Thank you for voting!
burned out element
3 of 4 people found this instruction helpful.
  • Neil from Oak Park, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Shut off power to the oven.
Unscrewed the old broiler element, unplugged it.
plugged in new one, screwed it in.
Turned on the power. Voila!
Was this helpful?
Thank you for voting!
Burner would not heat up.
2 of 2 people found this instruction helpful.
  • Nancy from Baldwinsville, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 screws, cut the wires, pulled the part out that the element plugs into. Replaced the old part with the new one and put the screws back in to hold it, reconnected the wires and plugged in the element. Turned stove on and Valaaaa! It was fixed in 10 minutes! Thanks for the great repair parts!
Was this helpful?
Thank you for voting!
The lower bake element blew up.
2 of 2 people found this instruction helpful.
  • Carolyn from Gomer, OH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I had My friend from church come over and look at the problem. He said that it could be fixed, so he looked up the part and ordered the part. It came in two days, it took about 15 minutes to install the part and put the back back on. It was that easy! Thank you! Now i don't have to buy a new stove!!
Was this helpful?
Thank you for voting!
Front Burner Would Not Heat
2 of 2 people found this instruction helpful.
  • GAIL from ORCHARD PARK, NY
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I cut the power to the circuit. Removed the burner and then unscrewed the old aluminum plate attached to the range top cover. Opened the topcover to access the wires. I cut the two wires being sure that I left enough length. I then slipped the two new wires with the brass contacts into the new black plastic holder until it locked . Reattached the new metal plate to the range cover, fed the wires through and snapped the new plastic holder into the aluminum plate. Secured wire ends with the ceramic wire nuts. Total time about 30 minutes.
Was this helpful?
Thank you for voting!
broil element quit working.
2 of 2 people found this instruction helpful.
  • Robert from Houston, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers
After receiving the part I was able to quickly remove the old piece and replace with the new. For this project you have to remove the back of the oven to remove the electrical attachments.
Was this helpful?
Thank you for voting!
Screw hard to get off
2 of 2 people found this instruction helpful.
  • Lawrence from BROOKSVILLE, FL
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Drilled a pilot hole with a 1/16 th drill bit and tapped off screw head.
Was this helpful?
Thank you for voting!
burner inop
2 of 3 people found this instruction helpful.
  • Donald from Milford, MI
  • Easy
  • Less than 15 mins
  • Screw drivers
removed the plug that had burned up on one of the top burners, replaced it with a new plug purchased from parts select., it was quite easy ,I unpluged stove and raise the top exposing wiring for the burners cut the old plug wiring and connected the wires for the new plug with connectors and shrink tubing supplied in the repair kit easy a nd quick repair
Was this helpful?
Thank you for voting!
Broiler Replacement
2 of 3 people found this instruction helpful.
  • Nick from Cottonwood Heights, UT
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Oven was missing the broiler element when I moved in so the connector/wires to plug the broiler were no longer visable in the main part of the oven (otherwise the repair would take 2 minutes). Moved oven away from wall and unplugged. Unscrewed sheet metal on the back of oven and found the broiler wires (the only two NOT connected to somet hing). Fed the wires back into the oven and plugged in the broiler. Attached the broilers to the top hooks. Put sheet metal back on. Everything worked fine. I wouldn't say I know much about fixing things, but this was a very straight-forward job.
Was this helpful?
Thank you for voting!
N/A
1 person found this instruction helpful.
  • Gerry from Mackay, ID
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I followed the instructions provided.
Was this helpful?
Thank you for voting!
None
1 person found this instruction helpful.
  • Bradley from Neillsville, WI
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Unplugged the stove, unscrewed the two screws, unplugged the element....plugged in the new element, screwed to top of stove, plugged stove back in and tested. Pizza was great!
Was this helpful?
Thank you for voting!
Stove Burner wouldn't heat up
1 of 2 people found this instruction helpful.
  • Donna from Sandwich, MA
  • Really Easy
  • Less than 15 mins
Someone did the repair for me.
Was this helpful?
Thank you for voting!
Three of four electric coils won't turn on
1 of 2 people found this instruction helpful.
  • Arsenio from Beaverton, OR
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I took out the coils manually by pulling them out with slight pressure. Then I lift the hood by first unscrewing the four screws. I have never done anything like this before just intuitive sense to locate the screws that needed to be loosened. Afterwards I remember placing something underneath like a piece of 2x4 wood block to act as supp ort to hold the hood open so I can work on the coils. The parts I got are exactly the same as those I am replacing so I just copied the connection and voila my electric range is working like new. Well of course before I touched anything, I made sure I turned off the main switch and that nobody switches it back on without my knowledge. Thanks for providing the parts, I just saved myself from buying a $600 electric range.
Was this helpful?
Thank you for voting!
The Problem Was That The Plug Was Gone It Fell Down Out Of The Bracket
1 of 2 people found this instruction helpful.
  • Elnora from Brundidge, AL
  • Easy
  • 15 - 30 mins
  • Screw drivers
I took the old wires and plug off and replaced it with the new block it works fine
Was this helpful?
Thank you for voting!
Sockets burnt out.
1 of 2 people found this instruction helpful.
  • James from Bear, DE
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Repair was very east. The suppliers package had all of the necessary parts ceramic wire nuts wire Ect. Excellent.
Will buy from Part Select Appliance again.
Was this helpful?
Thank you for voting!
All Instructions for the ESD3492H
16 - 30 of 81