BCS42ELE General Electric Refrigerator - Instructions

Took back off with sockets and saw water dripping from duel inlet water valve . Turned water off and had no trouble indentifying part with partselect via computer , ordered part using ups and received in two days , followed an excelent video furnished by partselect then replaced new part with old part , turned water back on and great ! I found it a lot easyier when you have your son-in-law do the work !

I pulled the Refrig out of the space so that I could get to the plug and water shut off. After unplugging and turning the water off, I had to remove the 7 screws holding the cardboard cover over the bottom portion of the Refrig. I then had to unloosen the water input to the the valve. Then I removed the screw holding the Water Valve. I then had to unplug the unit from the electrical connectors. After that I had to cut the plastic hoses off the valve. All that was left was to reconnect everything, replace the cardboard covering and do an operational test. Everything worked. The ice maker began to produce ice cubes and there were no leaks.

parts select delivery time unreal !!!!! ordered on a Tues. was here Wed !!!! Perfect fit, minor difference in tubing connection. Took more time to clean the floor once i moved the fridge than the actual repair. Thank you Parts Select, if i need more appliance repair parts, you're my first choice>

opened back panel and replaced valve verry easy

I watched the video on the partselect website once and completed the repair. Very easy!

I'm a real novice at appliance repair but learned a lot from this effort. After doing enough online research and watching videos, I diagnosed the problem with my 20 year old ice maker. It was working, just not getting water. So I ordered a new water valve, much cheaper than the part Sears recommended. I easily hooked up the new valve but the old copper water supply line was leaking so I ordered a $7 pex line from Home Depot. Hooked it all back up and now I'm in business, and saved some money too!

Repair was really easy, bought the part because of partselect video. Saved myself a lot of money vs calling a repairman.

turned water off removed old water valve moved wires to new one moved water supply and discharges to new one reinstalled new valve

I used the how to video from the site and had the part replaced in about the same time the video did it, even with being distracted with a phone call.

I removed the valve from the fridge with a nut driver, this allowed me to disconnect the two lines and the water main inlet. Re attach the main line and cut off ends of both plastic lines with a razor knife and re insert the two lines. Last was to connect the main water inlet and tighten . The last thing was to turn on the water and check for leaks and we had none so put the fridge back in its proper place and job done. Thank you for your help Michael

Watched a youtube on capacitors- though on a motor with a pulley, the symptoms were the same, motor running and pulley not turning-bad capacitor. Took a chance for a 17+ dollar part vs a new compressor. It worked.

Googled the model number of refrigerator with symptoms of "refrigerator wont run". Parts select web site appeared on my screen, opened Parts Select website, Partselect said probable cause of my frige symptom was that the run capacitor usually burns out 51% of the time. They were correct with the diagnosis 100%. I ordered the run capacitor for $23.00, installed it in 10 minutes, refrigerator runs good as new. Thank you for saving me cost of service call. I probably saved $200 or more. I will use Partselect again with my next problem. THANK YOU,

The repair took all of 15 minutes. The original part once unscrewed was a little difficult to remove with out damaging other parts. The new part was very easy to install, didn't fit exactly like the original. Had to force into possition. Works great.

It was too simple. I follwed the instruction already on the webb site. 3 easy steps.

Observing the ice maker itself was working, and that water was flowing to the dual inlet water valve, I assumed the problem must be a faulty outflow valve. If either of the two valves do not close completely, the water slowly accumulates in the plastic line and freezes as it enters the freezer compartment. A solid plug of ice will form in the line, either causing no water to enter the ice tray, or it may leak under pressure when the valve opens briefly (as was my case). The solution was simple: change the dual inlet valve, and while this took me approximately 15 minutes to 1)turn off electricity and water to the frig, and 2)replace the part, the plastic tube going to the ice tray warmed up enough as I watched a one inch plug of ice exit the tubing. Once the power and water was turned on, and I checked for leaks, the ice maker worked like new! Not bad for a $30 fix.