My Orders
ATG15 Frigidaire Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
plastic brackets that hold rack were broken in refrigerator door
1 of 4 people
found this instruction helpful.
The new parts just popped right into the holes and the door now has two shelves again.
Other Parts Used:
Was this helpful?
Thank you for voting!
both end caps broke
0 of 1 people
found this instruction helpful.
Door panel was already off. Took off broken caps, placed new ones on & put back on door.
Other Parts Used:
Was this helpful?
Thank you for voting!
Freezer okay, but fridge was warm
0 of 1 people
found this instruction helpful.
Website was great!
The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.
To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.
The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.
To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.
Other Parts Used:
Was this helpful?
Thank you for voting!
One broken retainer bar, and 4 broken brackets
2 of 8 people
found this instruction helpful.
cut the retainer bar to proper lengh, put on the
end caps of both bars in question and snapped them both into place.
end caps of both bars in question and snapped them both into place.
Other Parts Used:
Was this helpful?
Thank you for voting!
bottom door shelf, both end caps broken off
0 of 2 people
found this instruction helpful.
put both end caps on metal guard,put back on door,push down to lock into place. 30 second repair,
Other Parts Used:
Was this helpful?
Thank you for voting!
Door shelf end cap broke
0 of 2 people
found this instruction helpful.
We just put the new end parts into the door and then placed the bar inside the caps. We had contacted our appliance dealer at least three times to get parts for us but to no avail. A friend told me about your website and the rest was history ----- and easy. Thank you.
Other Parts Used:
Was this helpful?
Thank you for voting!
I inherited this old refrigerator as part of the space where I now live. I found the bottom shelf bar for the door tucked away under the sink, but there were no brackets. I'm sure they were broken and discarded at some earlier time.
I snapped the brackets into the ends of the shelf bar, then inserted them into the holes in the door and pulled down each end until it snapped in place.
Other Parts Used:
Was this helpful?
Thank you for voting!