My Orders
ATG15 Frigidaire Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door shelf retainer bar was missing from fridge door
2 of 4 people
found this instruction helpful.
The replacement part was a bit too long (about 6"). Measured length of the existing bar that was on lower shelf and used a rotary tool with a metal cutting disc to make the same length. Everything snapped into place easily.
Other Parts Used:
Was this helpful?
Thank you for voting!
Coils kept icing and refrigerator stopped cooling lower compartment.
5 of 14 people
found this instruction helpful.
Replaced defrost timer & thermostat.
Other Parts Used:
Was this helpful?
Thank you for voting!
The door shelf retainer bar was too long, 6" to 8"
1 of 2 people
found this instruction helpful.
I measured the width I needed and used a handsaw to cut it the proper length. Then I snaped the pieces in and it was a perfect fit.
Other Parts Used:
Was this helpful?
Thank you for voting!
Bottom shelf (beverage shelf, large bottles, etc.) was unuseable because the plastic end caps were cracked. The metal shelf bar was intact though.
1 of 2 people
found this instruction helpful.
We have a wonderful Kelvinator refrigerator. It has served us tirelessly for more than 15 years - and looks as good as new! (We frequently clean it out and clean the interior and exterior, to keep it looking and smelling clean)
Replacement of the end caps and shelf was very easy!
The broken end caps were removed (m ... Read more issing for years), and it became one of those small projects that one never gets around to. I finally took down the model number and looked online for it. Google or Yahoo (can't remember which) pointed us to you site. I was SHOCKED to see that the parts were still available! I called your friendly customer order line and had a very pleasant experience placing the order. The BIGGEST shock came when the parts arrived THE NEXT DAY!! Just in time for Thanksgiving! You are AWESOME!
The Repair:
Easy as pie. The end caps simply snap into place. I did the left side first, then carefully inserted the metal bar, which is supported by the two end caps. Next I snapped in the right side cap - DONE. It took longer to clean the bar up, than it did to replace the caps!
The Results:
The bottom door shelf is now useable again. We can place 2 liter beverages and juice containers on the door, where they belong! My wife cheered and commented, "The refrigerator is no longer an eye sore when I open it!" :-)
Thank you Parts Select!!!!
Replacement of the end caps and shelf was very easy!
The broken end caps were removed (m ... Read more issing for years), and it became one of those small projects that one never gets around to. I finally took down the model number and looked online for it. Google or Yahoo (can't remember which) pointed us to you site. I was SHOCKED to see that the parts were still available! I called your friendly customer order line and had a very pleasant experience placing the order. The BIGGEST shock came when the parts arrived THE NEXT DAY!! Just in time for Thanksgiving! You are AWESOME!
The Repair:
Easy as pie. The end caps simply snap into place. I did the left side first, then carefully inserted the metal bar, which is supported by the two end caps. Next I snapped in the right side cap - DONE. It took longer to clean the bar up, than it did to replace the caps!
The Results:
The bottom door shelf is now useable again. We can place 2 liter beverages and juice containers on the door, where they belong! My wife cheered and commented, "The refrigerator is no longer an eye sore when I open it!" :-)
Thank you Parts Select!!!!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
end cap broke
1 of 2 people
found this instruction helpful.
First I removed the broken end caps. I placed the new end cap onto the shelf bar and snapped the end cap into the holding slot on the door interior. Took about 5 minutes. Very easy.
Other Parts Used:
Was this helpful?
Thank you for voting!
Cross bar end caps were broken.
0 of 1 people
found this instruction helpful.
I put the end caps on the cross bar and reinstalled it in the fridge. Easy job.
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken End Caps On Center Door Shelf
0 of 1 people
found this instruction helpful.
I removed the broken end caps by hand. They snap in to the center retainer bar. I ordered replacement parts from part select on their website. New end caps arrived in a couple of days. I installed new caps. No tools needed. Great service by part select. Thank you tm
... Read more
staten island ny
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
W/O End Caps Nothing Will Stay On Shelf
0 of 1 people
found this instruction helpful.
First, I should tell you I break more things than I fix by trying to install wrong or tightening until broken. It may seem real easy to to put end caps on but there was a suprised look on my wife's face when she watched me put them on the first time. She made me some chocolate chip cookies to celebrate. I ordered the parts and recei
... Read more
ved them the next day. I shopped local and and was quoted up to five times the price nobody had them in stock.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!