AG20 - Instructions

I have received part in 2 days and replaced myself in less than 2 minutes. Super easy.

After getting help from customer support, I was able to order the part. I tracked the part on FED EXp.
After deliver the part was installed and working in 5 minutes. All that for less than $50.00.

Removed the two screws that hold burners on mounting bracket . Removed burners and installed new burners. re-adjusted air flow to elimenate yellow flame.

Nothing really. Only couple of screws to attach the bracket holding the front and back burners.
The other parts: filter, burner, pan, where just replaced.

Simply removed the front burner using 1/4 incn nutdriver on
two screws.placed new burner in position and tightenwd two screws.
Simplest and easiest job I ever did!
Works as new!

Remove grates and pan. unscrew each burner from the metal cross mount bar, keeping in mind, the position of the cross mount bar.(Mine was not reversible.) Reverse the procedure with the new burners.
Adjust the air opening to eliminate any yellow flame. The air opening is located immediately adjacent to where the burner pipe goes i ... Read more nto the cooktop. (Near the front of the cooktop in my case.)

Biggest problem was making sure the correct parts were ordered.

Took out grill grates then took out cartridge ...replaced burner cartridge then attached spill pan then burner grates.... super easy
Note:.. center fan will go off AFTER you put drip pan in

After locating the new 2 burner cartridge set on the Internet, I ordered it from PartSelect and it arrived in just two days, the day before Christmas. It was super easy to install, after quickly removing the old grill burner and covers, by just dropping the burner cartridge and pan into place and putting on the new burner grates. They ma ... Read more tch perfectly the original cast iron grates that came with the stove 7 years ago! It is nice to now have four full functioning burners.

Ordered the part from you and received it on the third day. Simply unplugged the old assembly and plugged in the new one. Turned the control and the burners lit immediately. It was a piece of cake. The best part was a saving of near 100 dollars. I am extremely pleased.
Thank you,
Gene Guthan
Santee, SC

just removed two screws - took old unit out - put new unit in.

Ordering was a snap, and I received the part only a couple of days after I ordered it.

This was easier than installing a lightbulb! All I did was take the part out of the packaging and plug the gas burner assembley in, add the cover to the burners and add the iron burners plates on top. The entire thing took less than 5 minut ... Read more es!!

Removed two screws and replaced burners and placed the unit back into position and the burners worked perfectly. Very easy. I think anyone could do this task.

just as stated before. Remove old burners from plate and reattach new burners.

Undid the bad part and installed the new one

Took out a couple of screws and put in the new part. PartSelect was fast and efficient. Highly recommended.