ACO15 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace light blub
-
roger from palm coast, FL
- Really Easy
- Less than 15 mins
removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.
Was this helpful?
Thank you for voting!
Burn't out bulb.
-
Carter from McCordsville, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the glass cover and replaced the bulb. Very simple.
Was this helpful?
Thank you for voting!
cracked revolving cooking tray
-
miriam from brookline, MA
- Really Easy
- Less than 15 mins
OMG! I wish everything in life were so easy.....The cooking tray of our 15 year old microwave cracked and I swore it'd be impossible to find a replacement. That is until I discovered Partselect.com!!All I had to do was input the appliance brand and part I was looking for, and there is was. Thank you, Partselect.com!!
Was this helpful?
Thank you for voting!
burnt out light bulb
-
Shirley from Londonderry, NH
- A Bit Difficult
- Less than 15 mins
-
Screw drivers
The problem I have with changing the bulb is my microwave is an overhead one and therefore I cannot tip it on its side to easily replace the bulb. I have to drop the lid down and carefully install the new bulb from underneath.
Was this helpful?
Thank you for voting!
Approximately 5 seconds into heating something, the microwave went dead
-
chap from edmond, OK
- Really Easy
- Less than 15 mins
-
Screw drivers
It literally took me longer to unpackage the fuse than to install it. I removed the outer shell by unscrewing the five screws, lifted it off and set it aside. The old fuse was readily visible so I pulled it out and put the new one in its place. I set the shell back on and replaced the screws. I plugged it in and ran it for 30 seconds
... Read more
while still in the shop just to make sure that solved the problem and presto - it worked like a charm. A $20 part saved me from having to purchase a new microwave (sadly, I had to break the news to the wife).
Read less
Was this helpful?
Thank you for voting!
The Microwave glass cooking tray broke
-
Larry from Severance, CO
- Really Easy
- Less than 15 mins
Great!! I set the new tray into the microwave and was done! This site has the best service I have ever seen! I'll be back when something else breaks, it is just a matter of time.
Was this helpful?
Thank you for voting!
Stopped working completely
-
Ramo from Sylvan Grove, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
My wife was pushing a few buttons with her knuckle (hands were full)and the microwave just turned off. Just like we had blown a breaker. First I unpluged it. Then I removed the phillips screws of the front panel, and found and removed the ceramic fuse. 3 days later I received the new fuse in the mail, and put it in. I plugged the micr
... Read more
owave back in and it works great.
Read less
Was this helpful?
Thank you for voting!
Needed a new bulb under the microwave.
-
Norma from Unionville, MO
- Really Easy
- Less than 15 mins
-
Screw drivers
After unplugging the microwave and removing the screw, I removed the old bulb and put in the new one!! I made sure it was in securely and the difference in the light was awesome! I use this light when I bake bread and let it rise inside the microwave, but DO NOT turn it on. The heat from this light helps the bread to rise properly!!
Was this helpful?
Thank you for voting!
microwave plate broke
-
Cassandra from Cleveland, OH
- Really Easy
- Less than 15 mins
Just took the plate out the packaging & rinsed,dried and put in the oven. I was so happy I found it @partselect online& it came in the next day or two. Will definitely use them again. It was a fraction of the cost from local parts store.
Was this helpful?
Thank you for voting!
broken
-
John from Knoxville, TN
- Really Easy
- Less than 15 mins
Placed in micro Great sevice. Thanks
Was this helpful?
Thank you for voting!
Burned out light bulb
-
Ray from Gatlinburg, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced light bulb.
Was this helpful?
Thank you for voting!
Light bulb burned out
-
Craig from Burke, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
I unscrewed the light cover, removed the burned out light bulb and replaced it with one I ordered on Partselect.com. It was very easy.
Was this helpful?
Thank you for voting!
Too Big Didn' Fix
-
BRIGIDA from GAINESVILLE, VA
- Really Easy
- Less than 15 mins
I received my glass cooking tray so fast but when I try to put in the microwave did't fix was to big,I call you today to return and very nice lady help me and told me I need to call whirlpool and explain them and already order again thank so much for all your help you have very nice people in customer service. Thank you so much
... Read more
again. !!
Read less
Was this helpful?
Thank you for voting!
Burned out lightbulb
-
Paul from Norristown, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
First let me say that I tried several places to get what I thought was a simple light bulb. This included several national hardware stores as well as a national electrical supply company. No luck. Went to the manual and PartSelect. Not only did you have it in stock, ship right away,at a reasonable price it arrived in a matter of days. One
... Read more
would not normally think of receiving a "how to" video to change a light bulb but you did. That impressed me. Suffice to say the replacement went well and you can be certain the next time I need a part I will go to you first. I am also impressed with the organizations with which you are affiliated with. BBB, Norton, PayPal, money back guarantee etc. Thank You The entire process was made pleasant with your support.
Read less
Was this helpful?
Thank you for voting!
Broken Tray ,Glass
-
Gena from ROSICLARE, IL
- Really Easy
- Less than 15 mins
Received my replacement Tray,Glass in only 2 days. Opened it and placed it in the Microwave. Yep, it was that easy!
Was this helpful?
Thank you for voting!