8902 - Parts

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.

This is an original replacement part manufactured for use with outdoor power equipment. The special screw is used with several types of equipment and the screw may have multiple applications. This fuel pump cover screw is used to secure the primer cover to the air purge body and fuel pump body. The fuel pump screw is available as an individual replacement part, please see model diagram for part location and usage.

This replacement filter is specially designed for use with Shindaiwa trimmers and brushcutters. It is an authentic OEM sourced item, not an aftermarket imitation. The purpose of this filter is to prevent dust and other debris from contaminating the engine. Please note, this foam filter is sold individually. Replacing this filter is a ve...Read morery simple task that will only require a screwdriver. • Remove the cover screw • Remove cover and take out the old filter • Secure the new filter • Reassemble and test the unit

This manufacturer approved Spark Plug Terminal Cap is a part that is located inside the spark plug boot, and attaches to the spark plug to transfer the electrical current between the two. If broken, the spark plug will no longer get the electrical current it needs, and the part must be replaced. Installation is rated as "Easy" by customer...Read mores and requires pliers. This bronze, metal part is electrical and comes individually sold. Refer to your make, model and diagrams to ensure this is the correct part for you.

This is an authentic replacement part manufactured for use with Shindaiwa trimmers and brushcutters. The metal shield mounting plate bolts to the gearcase housing and is used to support the deflector shield. This shield mounting plate is available as an individual replacement part, please see model diagram for associative parts.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is a genuine replacement part manufactured for use with gas-powered lawn and garden equipment. The special plastic connector couples pieces of fuel line usually near the grommet on the fuel tank. The connector can have multiple uses, please check parts diagram for location of the connector on a given model. The connector is sold individually.

This is an authentic OEM sourced replacement part that has been sourced from the original manufacturer to be used with lawn tractors from Snapper and Simplicity. The metal bushing fits into the front wheel mounting bracket. This item is used to provide spacing between the caster and the bracket assembly. The caster busing is sold individually.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special spring clip is commonly used to secure fuel lines. The spring clip is used with several types of equipment and can have multiple applications. This spring clip is available as an individual replacement part, please see model diagram for part location and usage.

The OEM Diaphragm Pump Gasket attaches to and prevents fuel leaks between the cover and the carburetor. It's a black part, rated as "Easy" to install by customers which requires a screw driver. If broken, there will be a leak. If broken, damaged, or worn the part must be replaced. Refer to your make, model and diagram to ensure this is the right part for you.

This is a genuine manufacturer-supplied part that is specially made for use with Shindaiwa handheld lawn and garden equipment. The lever connects to the handle assembly and is used to actuate the throttle cable to adjust the engine's power output. It provides an identical replacement for a missing or a faulty component that was installed ...Read moreon a new unit. Please make sure refer to the appropriate diagram of your model for the correct location and application of this lever. This high-quality part is made of durable material and is sold individually, keep in mind the hardware to secure it is sold separately.