8288 - Parts

This authentic OEM sourced part is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special pins which are utilized to secure components. If it is damaged or is missing, this will provide an identical replacement for the original component that was installed on a new equipment. This part is a s...Read moretandard hardware which may have multiple applications. Please refer to the appropriate diagrams for your model to ensure the exact location of this roll pin. One durable metal pin is included.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nut\'s location and usage.

Decal snapper

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

Bolt 3/8-16x.75 g5

This is an authentic Snapper replacement part, sourced from the original manufacturer for use with snowthrowers. The ball bearing is commonly used to reduce friction between a rotating shaft and a fixed part assembly. This special bearing is available as an individual replacement part, please see model diagram for related parts.

Lube fitting 3/16 pr

This authentic OEM-supplied component is specially designed for Snapper snow throwers. It is a special hardware that helps to provide a tight fit for the impeller shaft allowing for easy rotation with minimum friction. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Refer to the appr...Read moreopriate diagrams for your model to ensure the proper repair procedure. One durable metal part is included.

A genuine item that is supplied directly from the original equipment manufacturer for use with Murray and Snapper lawn and garden equipment. It is an identical replacement for a missing or faulty bumper cap that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct locatio...Read moren and application of this hardware. Keep in mind this high-quality component is made of durable plastic material and is sold individually.