8046 - Parts

This spray arm assembly is a vital component in dishwashers, responsible for distributing water throughout the tub to clean dishes effectively. It rotates during the wash cycle, using water pressure to spray jets that reach all areas of the load. The assembly may consist of multiple parts, including the spray arm, support, and connection ...Read morefittings—refer to your model’s parts diagram for a complete list. A properly functioning spray arm ensures thorough cleaning and helps prevent residue buildup. If dishes are coming out dirty or the arm isn’t spinning freely, replacement may be necessary. Installation typically involves removing the lower rack, detaching the old assembly, and securing the new one in place.

This oven broil element is a high-performance heating component designed to deliver intense, direct heat from the top of the oven cavity. Measuring approximately 12 ½ inches by 18 ½ inches, it operates at 3000 watts and 240 volts, making it suitable for broiling and contributing to certain baking functions. Positioned at the top interior ...Read moreof the oven, it ensures even heat distribution for optimal cooking results. This element is commonly used as a replacement in electric ranges experiencing reduced or no heat during broil or bake cycles. Installation typically involves disconnecting power, removing the old element, and securing the new one using existing mounting brackets and electrical connectors. It is compatible with a variety of household ranges and is engineered for durability and consistent performance.

This filter is for dishwashers. The filter removes food particles and debris from the water to prevent the drain from clogging. Follow the instructions in the manual when installing this part.

This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also known as your stove top. If you suspect that your surface element is not properly heating then you may want to test the element for continuity...Read more. This model is sold individually and is 1200 watts. The tools you will need for this installation include a Phillips screwdriver and a 14-inch nut driver.

The tubing carries water from the water inlet valve to the tub.

Located at the bottom of the dishwasher, this filter keep large particles of food and foreign objects away from the pump.

This part is the replacement kickplate grille or toe panel for your dishwasher. It is black in color and is approximately 7 inches by 24 inches. The kickplate grille is a decorative panel that covers up the opening at the bottom of your dishwasher. If your kickplate is damaged or missing, this is the part that will replace it. To replace ...Read morethe kickplate grille, simply unscrew it from the bottom of your dishwasher, then line up the new kickplate with the locator pins and screw it back into place. This part is an OEM part from the manufacturer and is sold individually.

The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tipping when force or weight is applied to an open oven door. The bracket is secured to the floor and wall and fits over the rear leveling leg in ...Read morethe back of the appliance, in a cutout specifically designed for the anti-tip bracket. This part is very essential to the safe operation of the appliance. Failure to install the bracket properly can result in the oven tipping or falling and causing injuries.

This is the replacement detergent dispenser for your refrigerator. It is gray in color and is sold individually. It is approximately 8.5 inches long and 3 inches wide. The detergent dispenser stores the detergent until it is ready to be dispensed. If your dishes are not coming clean, or you notice the detergent is still in the dispenser a...Read moret the end of the cycle, you may have a damaged or malfunctioning detergent dispenser. This is an OEM part sourced directly from the manufacturer.

Dual Radiant Surface Element

This is an upper dishrack slide for your dishwasher. It is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack. The mounting screws are not included in this purchase and can be found in the related parts section below. You should purchase a new dishrack slide if your current one has been warped or damaged over time.

This is a basket for your dishwasher. It sits in the lower dishrack and holds small utensils during a washing cycle. This basket has six smaller sections where you can separate your cutlery into specific groups. This silverware holder is made entirely of plastic with a crisscross pattern allowing water and small food particles to pass thr...Read moreough it during the cleaning process. This model is grey and roughly 14 inches long, about 6 inches high, and almost 4 inches thick.