EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3XART72 Whirlpool Refrigerator - Instructions

All Instructions for the 3XART72
121 - 135 of 1198

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Would not dispence ice
14 of 24 people found this instruction helpful.
  • Mike from Chickasha, OK
  • Easy
  • 15 - 30 mins
  • Socket set
Removed screws from front of ice container,replaced drum.
The hardest part was assembly of ice crusher,lucky the arms were lettered as to how they went back together.
Was this helpful?
Thank you for voting!
Ice Door broken letting warm air into Ice Maker system which kept freezing up.
25 of 57 people found this instruction helpful.
  • Anthony from Magnolia, NJ
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
I didn't have to buy a new Ice door kit. The part on the Refrig. door I needed I found out was unavailable. The door parts (Ice door parts and the asembly for the water unit) screws into that part. I found out that I would have to replace the whole refrig. door which was $900.00. I took every apart got me some pvc glue used it on the door and bought the original screw online with some other assorted parts,Door switch, etc. and was able to repair in about an hour. Some of the parts are very fraigle so you have to be very careful or you will be buying some new replacement parts.The new nickel and dime parts are expensive. My Icemaker was leaking where the Ice was clumping together in the bin, and when I checked the unit was $125.00. I found a new one and replaced it for about half that price. I am now very happy! (a least until the next project.)
Was this helpful?
Thank you for voting!
part of a freezer support bracket was missing
9 of 10 people found this instruction helpful.
  • peter from saint augustine, FL
  • Really Easy
  • Less than 15 mins
I wasn't sure the kit included the part I needed from the pictures, but it did. The part slipped over the flat plastic bracket attached to the right freezer wall and the shelf fit over it. No tools required.
Was this helpful?
Thank you for voting!
Severed/Rusted Support Shelf Stud
9 of 10 people found this instruction helpful.
  • Chris from Pensacola, FL
  • Really Easy
  • Less than 15 mins
  • Pliers
Easy as cutting through warm butter. Just grabbed the base of the broken stem flush with the wall of the fridge using the wide-angle setting of a normal pliers, and twisted it out. Left over was a hole to insert the replacement stem. Inserted stem, twisted clockwise into place, and done. Much better design than other units I've worked on becvause the replacement part has stout-gauge wires that, when new stem is twisted into place, "locks" it in so you don't need to reinforce it, acting somewhat like an anchor screw on the wall for hanging a picture. Thanks for the perfect part!! Service and delivery are excellent.
Was this helpful?
Thank you for voting!
leaking water dispenser
12 of 19 people found this instruction helpful.
  • roxana from dinuba, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
worked great parts were perfect!
Was this helpful?
Thank you for voting!
Both parts were broken and required replacement.
12 of 19 people found this instruction helpful.
  • Patricia from Inglewood, CA
  • Easy
  • Less than 15 mins
The broken part was removed and new part installed without any trouble.
Was this helpful?
Thank you for voting!
The refrigerator leaked water every time the ice maker filled.
11 of 16 people found this instruction helpful.
  • Robert E. from Darien, IL
  • A Bit Difficult
  • Less than 15 mins
The problem was discovered to be a cracked fill tube head, This part extends behind the refigerator and is VERY vulnerable to breakage when the box is pushed backagainst a wall space! Placing a shim under the vertical part of the fill tube fixed the problem even without replacing it with the new part. So, now I have a spare!
Was this helpful?
Thank you for voting!
broker door on ice shute
14 of 25 people found this instruction helpful.
  • John from Willington, DE
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
hardest part was getting up the nerve to pull front cover because it is plastic afraid i would brake it pull from bottom and lift up one screw holds old door inplace uplug electric new door doesn't have electric that it.
Was this helpful?
Thank you for voting!
Worn out door chute
14 of 25 people found this instruction helpful.
  • Murali from Rochester, MN
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Pry open the front dispenser outer cover. Remove a screw holding ice door dispenser unit, remove old door chute, remove and place coil kind of stuff (connecting to panel) old chute to new one and reinstall.
Was this helpful?
Thank you for voting!
THERMOSTAT
9 of 10 people found this instruction helpful.
  • dominique from COMPTON, CA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I followed your instructions , the only thing that was left out was that the freezer has a drain hole that had to be thawed out with a hair dryer,till the water went to the drain pan underneath the ref. your instruction were through enough, that's why I purchased the part from your company, I installed the part 2 days ago and its working like new again 23.00 for the part instead of 1200.00 dollars for another ref. thanks very much. 6 months ago I purchased the relay and compressor starter from your company at that time per your instructions I shook the compressor starter and like a light bulb it had something broke inside,I needed that thanks again oomk
Was this helpful?
Thank you for voting!
Ice bin was broken
9 of 10 people found this instruction helpful.
  • Tim from COLUMBUS, GA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Watched the video about the repair once, then went to work. Everything was very straight forward. One of the most simple repairs I've ever done. Difficulty level of changing a light bulb.
Was this helpful?
Thank you for voting!
bottom and middle door bin broke
10 of 14 people found this instruction helpful.
  • Fred from Phoenix, AZ
  • Really Easy
  • Less than 15 mins
it snapped right in easy .
Was this helpful?
Thank you for voting!
tube got cut and it leaked
9 of 11 people found this instruction helpful.
  • Robert G. from Kalkaska, MI
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
first I turned off the water supply then I removed screw that was holding the nozzle and pulled out the tube then I pried out the face plate by prying from the bottom with a thin screw driver then I unpluged the wire harness so I could access the black tube guide that the white tube was housed in before it was cut I pushed the new white tube down threw the black tube and out the bottom hinge I replaced the nozzle screw plugged the harness back in replaced the face plate went to the bottom and connected the tube to the other half replaced the bottom molding and turned on the water
Was this helpful?
Thank you for voting!
Ice container wouldn't dispence
10 of 14 people found this instruction helpful.
  • Dennis from Cheney, KS
  • Really Easy
  • Less than 15 mins
I simply replaced the entire ice container and auger assembly. I intend to repair the old assembly for use as a spare if the new one ever has problems in the future.
Was this helpful?
Thank you for voting!
The shelf runner broke
10 of 15 people found this instruction helpful.
  • Andrew F from Media, PA
  • Really Easy
  • Less than 15 mins
Took out the old one and put in the new one. No tolls required. It did give me the opportunity to clean the back wall of the refrigerator.
Was this helpful?
Thank you for voting!
All Instructions for the 3XART72
121 - 135 of 1198