3ET18Z Whirlpool Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No problems.
1 person
found this instruction helpful.
-
Cynthia from DUCHESNE, UT
- Really Easy
- Less than 15 mins
Order the part and just slide the pan in.
Was this helpful?
Thank you for voting!
There was a crack in the Humidity Crisper drawer
1 of 2 people
found this instruction helpful.
-
Mary from FRIDAY HARBOR, WA
- Really Easy
- Less than 15 mins
I looked it up on the site per Refrigerator Model #. I wanted a confirmation from an expert at this site that I was ordering the right drawer. The part # the expert gave me was different than what I was going to order per my Model #. I'm really glad I waited for the expert reply and ordered that drawer. This is for a rental property, an
... Read more
d we are a few hours away from the property. It was less than a minute to pull out the old crisper drawer and slide in the new. Thank You!!!!!
Read less
Was this helpful?
Thank you for voting!
The track that held up the drawers broke
1 of 2 people
found this instruction helpful.
-
Harriet from Minnetonka, MN
- Easy
- Less than 15 mins
I removed the food off the glass shelf. I removed the drawer and lifted out the frame that holds the glass shelf. I removed the glass and the broker track and put in the new track. I put the glass back in then put it into the refrigerator.
Was this helpful?
Thank you for voting!
light did not work on the refrigerator side
1 of 2 people
found this instruction helpful.
-
David from GROVESPRING, MO
- Easy
- Less than 15 mins
bulbs were not burnt out. received the new switch in a few days. watch the short video, was good to see how it comes out. used a putty knife to release the defective switch, removed wires put them on the new one and posed the new switch back in. Not bad Part cost $11.00 7 dollars shipping so for 17 bucks it works great. nice to see what i
... Read more
s inside the refer!
Read less
Was this helpful?
Thank you for voting!
2 broken crisper drawers
1 of 2 people
found this instruction helpful.
-
Susan from Nags Head, NC
- Really Easy
- Less than 15 mins
We went online, found the part, and had it delivered to our rental house in Nags Head, NC. It was the easiest thing ever.
Thank you
Thank you
Was this helpful?
Thank you for voting!
Nonr
1 of 2 people
found this instruction helpful.
-
Gaynell P from Spring, TX
- Really Easy
- Less than 15 mins
Replaced missing stud.
Was this helpful?
Thank you for voting!
Broken shelf supports
1 of 2 people
found this instruction helpful.
-
Bob from Las Vegas, NV
- Really Easy
- Less than 15 mins
Took just a few moments to install. The parts fit like a glove,
Was this helpful?
Thank you for voting!
Poor design leaves fitting vulnerable to damage. Part was broken when pushed to close to the wall.
1 of 2 people
found this instruction helpful.
-
Mike from Camas, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Simply removed the old and replaced with the new part.
Was this helpful?
Thank you for voting!
Two of the parts were broken so the shelf was laying on the drawers so neither could be used effectivly
1 of 2 people
found this instruction helpful.
-
ROD from LINCOLN, NE
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Pulled out the stud with a wire cutter and replaced it with the exact part you shipped in the kit.
The other 2 parts just slipped on the brackets
Nice thing is now I have extra parts for the other shelf.
The other 2 parts just slipped on the brackets
Nice thing is now I have extra parts for the other shelf.
Was this helpful?
Thank you for voting!
Movers broke the icemaker water fill tube shoving my refrigerator through the front door.
1 of 2 people
found this instruction helpful.
-
Christopher from Valley Village, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
I unscrewed the fill tube screws from the back of the fridge, and pulled the tube out.
Then I put the new tube in, screwed the screws back in and reconnected the waterline.
Then I put the new tube in, screwed the screws back in and reconnected the waterline.
Was this helpful?
Thank you for voting!
Broken End cap on fridge shelf
1 of 2 people
found this instruction helpful.
-
Nathan from Coralville, IA
- Really Easy
- Less than 15 mins
Removed the existing broken end cap, and replaced it with the new one. Installed shelf securely back in fridge. Easiest repair I've ever done. Less than 5 minutes. I wish everything were that easy.
Was this helpful?
Thank you for voting!
One of the door shelf end caps broke
1 of 2 people
found this instruction helpful.
-
Gary from Aberdeen, SD
- Really Easy
- Less than 15 mins
I removed the broken end cap and then I snapped the metal shelf onto both end caps and replaced the shelf.
I really must say that dealing with PartSelect was exceptional. It took about three days for me to get the part and, prior to that, it was very easy for this sidewalk fixer to locate the correct part on their website. ... Read more Thank you for your excellent service.
I really must say that dealing with PartSelect was exceptional. It took about three days for me to get the part and, prior to that, it was very easy for this sidewalk fixer to locate the correct part on their website. ... Read more Thank you for your excellent service.
Read less
Was this helpful?
Thank you for voting!
Water tubing was accidentally broken from the back of the freezer.
1 of 2 people
found this instruction helpful.
-
Lois from Thomasville, AL
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the two screws holding the funnel in place...removed the old one and replaced it witht he new tubing...screwed screws back in and the jov was complete. It actually took longer to get it out of the sack than it did to put it together
Was this helpful?
Thank you for voting!
Cracked drawers
2 of 5 people
found this instruction helpful.
-
KATHY from ARLINGTON, VA
- Easy
- 15 - 30 mins
Replaced but drawers are lesser quality to the original drawers. Do not glide open easily
Was this helpful?
Thank you for voting!
Both front wheels were severly damaged needing replacement.
1 of 2 people
found this instruction helpful.
-
James from Leesburg, VA
- Easy
- 15 - 30 mins
-
Socket set, Wrench (Adjustable)
I tipped the refrigerator back and my friend used an adjustable wrench to attach put the new wheel assembies on. I also used a socket wrench to get the old attacheement bolts to thread. I rolled the cleaned appliance in place and adjusted the wheels with the socket set for easy door closing. It went smoothly.
Was this helpful?
Thank you for voting!