EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3ET18Z Whirlpool Refrigerator - Instructions

All Instructions for the 3ET18Z
106 - 120 of 318

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I had taken freezer door off when moving and misplaced the one of the hinges.
2 of 4 people found this instruction helpful.
  • Darlene from Philadelphia, PA
  • Really Easy
  • 15 - 30 mins
I attached the hinge and secured it with screws and socket wrench.
Was this helpful?
Thank you for voting!
One of the front wheels was broken in half.
1 person found this instruction helpful.
  • John from INNSBROOK, MO
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
Very easy. Left the front of the refrigerator so it is approx. 4 inches of the floor. (used a two by four. Removed the screws (one for each roller). Removed the rollers and replaced with new rollers. Reinstalled the screws with secures the rollers to the refrigerator. Done
Was this helpful?
Thank you for voting!
Connection leaked as tube entered freezer
1 person found this instruction helpful.
  • Robert from MERRIMACK, NH
  • Very Easy
  • 15 - 30 mins
Followed video and had one problen, the metal pipe would not release as shown,so I used a hacksaw between the plastic and metal pipe, removing the metal pipe from inside as the video shows. Good instructions.
Was this helpful?
Thank you for voting!
gasket sagging at the bottom and was not airtight.
1 person found this instruction helpful.
  • Joyce from GALESBURG, IL
  • Really Easy
  • 30 - 60 mins
  • Socket set
I followed the instructions on the video you provided with my order. Removed the freezer door and used the putty knife to loosen the old gasket and installed the new one. I'm a 77 year old female and if I can do it, so can you.
Was this helpful?
Thank you for voting!
door hinge broke.
2 of 4 people found this instruction helpful.
  • Bernard from DONALDSONVLLE, LA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Removed door and replaced bushing bracket was ok.
Was this helpful?
Thank you for voting!
Gasket had several tears in it at the corners and was leaking air into the fresh food compartment
1 person found this instruction helpful.
  • James from BATON ROUGE, LA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Removed the old gasket and ran the hard edged lip into the opening behind the door liner. Concerned that the gasket does not seem to be attaching itself to the door well. First put it on the side of the refigerator and it would not adhere enough to support itself. While it closes it just doesn't seem to attach with the magnets in the g asket. These magnetic strips have a weak magnet side and a strong magnet side. I wonder if they put the wrong side facing the door when they assembled it. Counter this with a new gasket for an upright freezer which was twice the length and attached itself firmly to the side wall of the freezer and did not slide down.
Was this helpful?
Thank you for voting!
Freezer was working but fridge was barely cooling. Look further into how to test thermostat.
1 person found this instruction helpful.
  • Bonnie E from MODESTO, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver
I just replaced my defrost thermostat after using the place-in-ice-water method, and I think it may not have been necessary. My timeline: my fridge was not getting cold enough. I realized it the day before going on a trip. I vacuumed the (very dusty) coils at the bottom, and the next morning the fridge seemed colder, but I thought I s hould order parts just in case. I ordered a heater and a thermostat. The fridge seemed to be operating normally when I returned from my trip, but I had the parts, so I thought I'd go ahead and dismantle the freezer and test the existing parts. My intention was to return both parts if the old ones passed the tests. I opened up the back of the freezer and there was no ice on the fins. I thought, great, the existing heater works! I cut out the thermostat, placed it in ice water, and didn't get continuity. So I decided to go ahead and put in the new thermostat. Because I'm not experienced with using a multimeter, I thought I'd test the new thermostat to see how the test should work. To my surprise, the new thermostat also failed the test! Stumped, I thought I might as well install the new thermostat, since I had opened the package and couldn't return it.
Further internet research suggests the place-in-ice-water method of testing is not adequate. One YouTube video by Parts Dr says to place the part in a working freezer. I froze my old thermostat and tested it; still no continuity. This thermostat may not be typical, though. The video discussed the temperature ratings on thermostats. The temperature rating on both (old and new) thermostats is L8.9-16.7C. That converts to 48-63 degrees fahrenheit, which obviously are not freezing temperatures. I'm not convinced I needed a new thermostat, but I trusted the videos I consulted earlier.
I cleaned the fridge thoroughly, so at least now I have a nice clean fridge to show for my efforts.
Was this helpful?
Thank you for voting!
Original door gasket split from age, no longer sealing snugly to refrig.
1 person found this instruction helpful.
  • William from LYNBROOK, NY
  • Easy
  • 15 - 30 mins
Inserted scraper behind gasket breaking it free from door, permitting a hand hold. While putting tension on gasket, slid scraper around door gently removing old gasket. Replaced gasket starting at top gradually working around door. No need to remove door.
Was this helpful?
Thank you for voting!
My wife broke the shelf support
1 person found this instruction helpful.
  • Hamid from Owasso, OK
  • Really Easy
  • Less than 15 mins
The new shelf support part fit perfectly. I needed no tools just slid it on the existing bracket. Super easy.
Was this helpful?
Thank you for voting!
A couple supports broke
2 of 4 people found this instruction helpful.
  • Michael from Cary, IL
  • Really Easy
  • Less than 15 mins
I simply slid off the broken supports, and slid the new ones on.
Was this helpful?
Thank you for voting!
My Crisper Pan was broken so I needed a new one.
2 of 4 people found this instruction helpful.
  • Debra from Lakewood, CA
  • Really Easy
  • Less than 15 mins
I ordered a new one waited for the new ones to come in once it did I took out the old ones and replaced them with the new ones. It was simple.
Was this helpful?
Thank you for voting!
Broken wheel on leveling roller
2 of 4 people found this instruction helpful.
  • Max from Jonesboro, AR
  • Really Easy
  • Less than 15 mins
  • Socket set
I removed one bolt and took out the old roller after first blocking up the fridge. Then I was puzzled for a moment because the hole in the new assembly was not tapped. But then I saw that the old bolt was a self tapping bolt. I used it to tap the hole then removed it and installed the new assembly. No sweat job.
Was this helpful?
Thank you for voting!
Light switch broke
2 of 4 people found this instruction helpful.
  • Carolee from Spokane Valley, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.
Was this helpful?
Thank you for voting!
The Light Socket Burned Out.
5 of 13 people found this instruction helpful.
  • MATTHEW from STOCKTON, CA
  • Really Easy
  • Less than 15 mins
I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.
Was this helpful?
Thank you for voting!
no drawer
1 person found this instruction helpful.
  • Xiaoping from KIRKLAND, WA
  • Really Easy
  • Less than 15 mins
just insert
Was this helpful?
Thank you for voting!
All Instructions for the 3ET18Z
106 - 120 of 318