3ET18Z Whirlpool Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broke light switch while cleaning
2 of 3 people
found this instruction helpful.
-
Gail from Golden, CO
- Really Easy
- Less than 15 mins
use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks
Was this helpful?
Thank you for voting!
End caps broke on the lower shelf
2 of 3 people
found this instruction helpful.
-
Eugene from Erie, PA
- Really Easy
- Less than 15 mins
Slid the end caps onto the shelf, placed the tape on the pieces as noted in the directions, and put the shelf back in place. Fast service, exact part, easy to find on the web site! Great!
Was this helpful?
Thank you for voting!
Crisper Drawers were cracked
2 of 3 people
found this instruction helpful.
-
Luke from CENTER, TX
- Really Easy
- 15 - 30 mins
I replaced the cracked crisper drawers with the new ones just by sliding them in the bottom of the refrigerator. This did not solve the problem because one of the drawers was smaller than the other one and left a big space. When I ordered the Crisper Drawers I looked at the part diagram and it looked to me that the drawers were two differ
... Read more
ent sizes and thats what I ordered. I now need to order another large drawer to finish the repair.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Drawer cracked/split
4 of 9 people
found this instruction helpful.
-
Yvonne from Fredericksburg, VA
- Really Easy
- Less than 15 mins
I just slipped the new drawer into place. So easy, even a woman can do it! ( I am female!)
Was this helpful?
Thank you for voting!
New Rental, Door Bar Broken
2 of 3 people
found this instruction helpful.
-
Susan from Stratford, CT
- Really Easy
- Less than 15 mins
-
Pliers
Just moved into a new rental home and a few days in the bar that holds all the stuff -- milk containers, juice jugs, etc. -- in the refridge door falls off. The old tenants had "fixed" it with tape on one side and paint stirrers and caulk on the other side. (No kidding -- a real overkill job they did).
I looked up the model num ... Read more ber online and found this site and promptly ordered the parts for $6 plus shipping. The parts came and snapped right in perfectly. Took only a minute.
I really only had to use pliers to pull out the oodles of hard swirly caulk from the slots in the door left from the overkill job by the previous tenants.
PartsSelect is awesome! The site makes it easy to look for the part you want and the parts were perfect -- No more stuff falling out the fridge door.
PS. This form made me select the age of the appliance. I really have no idea since I just moved in and it was already here.
I looked up the model num ... Read more ber online and found this site and promptly ordered the parts for $6 plus shipping. The parts came and snapped right in perfectly. Took only a minute.
I really only had to use pliers to pull out the oodles of hard swirly caulk from the slots in the door left from the overkill job by the previous tenants.
PartsSelect is awesome! The site makes it easy to look for the part you want and the parts were perfect -- No more stuff falling out the fridge door.
PS. This form made me select the age of the appliance. I really have no idea since I just moved in and it was already here.
Read less
Was this helpful?
Thank you for voting!
Metal end cap on freezer door handle broke
2 of 3 people
found this instruction helpful.
-
Annette Jones from Glendale, KY
- Really Easy
- Less than 15 mins
-
Screw drivers
Parts Select was easy to deal with -- had the item next morning after ordering! But Whirlpool should be ashamed -- this is the FOURTH time this part has had to be replaced in the 13 years we've had this refrigerator. Unrelated, but still a Whirlpool problem, the icemaker broke within 6 months -- had it repaired twice and then gave up.
... Read more
Will buy a different brand frig next time.
Read less
Was this helpful?
Thank you for voting!
Original drawer handle had cracked and the crack spread down to the body of the crisper unit.
2 of 3 people
found this instruction helpful.
-
Scott from JAY, VT
- Very Easy
- Less than 15 mins
Took out the old, cracked, crisper unit and removed the white trim piece on the handle so that we could re-use it on the new crisper unit (which, in spite of the $90+ price tag did not come with new trim). The whole thing took 3 minutes to do.
Was this helpful?
Thank you for voting!
Shelves in freezer falling off
2 of 3 people
found this instruction helpful.
-
wendy from palm coast, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Went online with the model number, the part was very easy to find, diagrams helped me to have confidence in the choice. Parts came in two days, tore them open and used a screw driver to replace the broken shelf brackets, replaced shelves, I am a happy camper!!
Was this helpful?
Thank you for voting!
broken end caps
1 person
found this instruction helpful.
-
Patrick from Narragansett, RI
- Really Easy
- Less than 15 mins
snapped the new ones on the aluminum bar and inserted into the freezer
Was this helpful?
Thank you for voting!
End cap broke for freezer door.
1 person
found this instruction helpful.
-
Sharon from SPRINGVILLE, NY
- Very Easy
- Less than 15 mins
I slid the bar into the end caps, then slid the end caps into the slots on the door. No tools were required. My fridge is old, and I was very pleased that I was able to find the part.
Was this helpful?
Thank you for voting!
door Shelf end cap was broken
1 person
found this instruction helpful.
-
Leora O from PIERZ, MN
- Very Easy
- Less than 15 mins
I just snapped it into place. Easy Peasy!!!!
Was this helpful?
Thank you for voting!
My refrigerator would not defrost.
1 person
found this instruction helpful.
-
Eddie from BRONSTON, KY
- Very Easy
- Less than 15 mins
The first part I changed was the defrost timer but it did
not solve the problem, I replaced the bi-metal defrost sensor
and I have the same problem.
I can defrost by turning the clock manually and heater works.
... Read more
problem.
not solve the problem, I replaced the bi-metal defrost sensor
and I have the same problem.
I can defrost by turning the clock manually and heater works.
... Read more
problem.
Read less
Was this helpful?
Thank you for voting!
Light rocker switch broke and refrigerator light couldn't go on.
2 of 4 people
found this instruction helpful.
-
Cathy from HOPATCONG, NJ
- Very Easy
- Less than 15 mins
I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.
Was this helpful?
Thank you for voting!
Broken shelf end cap
1 person
found this instruction helpful.
-
Ronald from KEOSAUQUA, IA
- Very Easy
- Less than 15 mins
Simply replaced broken ones.
Other Parts Used:
Was this helpful?
Thank you for voting!
Shelf studs broke several years ago and I had a problem locating them. Finally wised up and checked Part Direct and found them, ordered the kit w/ 12 pieces. Then quickly watched the installation video. Took less than 30 minutes to replace two different studs. Wife is very happy.
1 person
found this instruction helpful.
-
Karl from BIRDSBORO, PA
- Easy
- 15 - 30 mins
-
Pliers
Simply took broken pieces of old stud out and replaced with the new ones. Used pliers to adjust them. Replace a freezer stud and a fridge stud.
Was this helpful?
Thank you for voting!