EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

38HA Magic Chef Range - Instructions

All Instructions for the 38HA
106 - 120 of 257

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
broiler pan missing
1 of 2 people found this instruction helpful.
  • RAYMOND from JACKSONVILLE, FL
  • Really Easy
  • Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
Thermostat bulb was hanging loose
2 of 5 people found this instruction helpful.
  • Willi from Old Saybrook, CT
  • Really Easy
  • Less than 15 mins
  • Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
Just needed new drip pans for burners
1 of 2 people found this instruction helpful.
  • Ann from Cadiz, KY
  • Really Easy
  • Less than 15 mins
Was glad to get the correct ones for a 30 year old stove. Had already wasted $12 shipping trying to order from someone else.
Was this helpful?
Thank you for voting!
cleaner
2 of 5 people found this instruction helpful.
  • Mary from Duarte, CA
  • Really Easy
  • Less than 15 mins
just needed clearner for the top of my glass top, the operator was very helpful I received my clearniner in 7 days thank you
Was this helpful?
Thank you for voting!
old tube burned out
2 of 5 people found this instruction helpful.
  • JERRY from SPANISH FORK, UT
  • Really Easy
  • Less than 15 mins
removed the shield and removed the old tube. Replaced with the new tube and replaced the shield. The only place I could locate this tube was through the internet. This Co. had as good a price including shipping that I found.
Was this helpful?
Thank you for voting!
Terminal block arc'ed because a wire had become loose.
1 of 2 people found this instruction helpful.
  • Larry from Scranton, KS
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Ordered and received the terminal block. Installed it along with a new 220V power cord and the appropriate insulator . Ensured the terminals were tight with a nut driver. Reinstalled cover. Then, using the control panel, I did a function check on all the heating elements, clock, oven light, to satisfy all operational requirements. All ch ecked good! And, I was relieved that the control panel had not been shorted out as the terminal block was due to a loose connection. Easy fix.
Was this helpful?
Thank you for voting!
After doing an oven self clean cycle, oven temp couldnt be set correctly, heat element was warm,not hot
1 of 2 people found this instruction helpful.
  • Philip from Winter Haven, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
After trying to set the bake temp after the self cleaning, it would not heat up. I Googled the model number,selected your link because it mentioned my symptom,and said usually it is the temp sensor in the oven that gets damaged by the high self cleaning heat. Your site had a place to enter my model number. You provided a great exploded vi ew of the parts, showing me my sensor,then you provided the part number of the kit i needed,and filled out the order form with payment method. Less than a week later I got my part with instructions. Your video showed me the two screws I remove from the front ,and I pulled the old part out and uplugged it's connector. Replacement was easy, and oven was fixed! Thank you for a great site! You held my hand through it all!
Was this helpful?
Thank you for voting!
Burners needed replacing
1 of 2 people found this instruction helpful.
  • Alene from INDIANAPOLIS, IN
  • Very Easy
  • Less than 15 mins
Pulled out the old burners and put in the new ones.
Was this helpful?
Thank you for voting!
Drip pans were old and with burnt on food that I couldn't get off. Disgusting!!
1 of 2 people found this instruction helpful.
  • Nicki from ELSIE, NE
  • Very Easy
  • Less than 15 mins
No problem Took off old ones and replaced with new.
Was this helpful?
Thank you for voting!
Drip pans needed to be replaced
1 of 2 people found this instruction helpful.
  • Mark from ROSENBERG, TX
  • Very Easy
  • Less than 15 mins
1) removed heating elements. 2) removed drip pans. 3) installed new drip pans. 4) reinstalled heating elements
Was this helpful?
Thank you for voting!
Simple - needed to replace the drip pans on the stove between tenants in a rental apartment
1 of 2 people found this instruction helpful.
  • Tama from Pacific Grove, CA
  • Really Easy
  • Less than 15 mins
This wasn't much of a repair -- rather a replacement of a simple abused part. At the same time, PartSelect allowed me to order what I needed after two failed attempts to buy replacements that would fit the range. I'll remember PartSelect if we need parts for other older appliances in the rental units.
Was this helpful?
Thank you for voting!
The three braces under the coils had weakened and fallen apart
2 of 5 people found this instruction helpful.
  • Suzanne from COZAD, NE
  • Very Easy
  • Less than 15 mins
I simply pulled out the old coils and plugged in the new ones. I saved the little pieces that accompanied each coil, because I didn't know what they were used for.
Was this helpful?
Thank you for voting!
My drip pans were in bad shape
2 of 5 people found this instruction helpful.
  • Sandra from Oldsmar, FL
  • Really Easy
  • Less than 15 mins
I removed the old and repaced with new. I never ordered anything one day and got it the next. I'm impressed
Was this helpful?
Thank you for voting!
Broiler element broken
1 of 2 people found this instruction helpful.
  • Walter J from Boynton Beach, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Very simple, unscrew the old element. Remove the electrical spade connectors and reverse to install new element. The folks at parts select.com were very helpful and even after I ordered the wrong part, the return process was hassle free. Prompt shipping, very happy.
Was this helpful?
Thank you for voting!
my stovetop light did not work
1 of 2 people found this instruction helpful.
  • Geraldine M. from Fork Union, VA
  • Really Easy
  • 15 - 30 mins
We actually had to get the repairman back that had repaired our microwave. Our range has the attached microwave above the range. My stovetop light worked prior to the visit. When he left, I prepared supper without the light, which did not go on. Ultimately, we had to replace the fluorscent tube, which thankfully, you had. No applianc e store in a 35 mile radius did. We finally got the glass protector off, and the new tube did not go on. Back to the repairman, to tell him the new bulb did not work and that probably something happened when he visited before. He came back, found that indeed a wire had been broken when he was working on the microwave. I had indicated to him I did not expect to pay another repair bill after I had alrealy spent 117. before plus the cost of the new bulb, 22. something including shipping. He obliged and id not charge me anythink to repair the broken wire.
Now I have the old bulb for back up!!!
Thank you for having my replacement tube!!
Was this helpful?
Thank you for voting!
All Instructions for the 38HA
106 - 120 of 257