EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3860X Magic Chef Range - Instructions

All Instructions for the 3860X
91 - 105 of 421

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Jennair cooktop with coils lost one of its coil guides.
1 person found this instruction helpful.
  • Bruce from SOUTHBURY, CT
  • Really Easy
  • 30 - 60 mins
  • Socket set
We bought the replacement Ceramic plug and wires, and opened up the jennair cooktop piece and rewired the NEW coil guide into the system. It works great.
Was this helpful?
Thank you for voting!
40+ year old oven. . . worn out, obsolete door hinges. . .
1 person found this instruction helpful.
  • Darrin from SEDRO WOOLLEY, WA
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Removed old hinges, fabricated new mounting plates from 16ga steel plate. . . Cut new hinges to fit in available space. . . Drilled and tapped new mounting holes and adjustment tracks. . . Shortened existing springs to fit new configuration. Installed new hinges.
Was this helpful?
Thank you for voting!
Replaced upper over light and assembly
1 person found this instruction helpful.
  • Thomas from SAN DIEGO, CA
  • Very Difficult
  • More than 2 hours
  • Pliers, Screw drivers
I had to pull out the oven and balance the oven on two patio tables. Remove the back of the oven. Pull out the light assembly which was burnt. I was unable to remove the casing around the light, so I destroyed it with a pliers. Reinstalling the new light and assembly was easy. What made this job difficult, I could not remove the light ass embly from the front of the oven and had to go in from the back.
Was this helpful?
Thank you for voting!
Bake element would no longer heat up
1 person found this instruction helpful.
  • Joe from Schertz, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I unplug the stove first. Then took off two screws that held the bake element in place. Pulled off the connectors using the pliers. Had to use pliers because they were really snug. Plug in the wires to the new base element. Crimped down the connectors a little bit to make sure they were snug. Inserted the bake element back into the holes at the back of the oven. Put the two screws back in. Plugged the oven back in and turned it on to make sure it worked. Lastly, tossed the old bake element in the trash. Really easy job. Glad I didn't pay anybody to do this.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person found this instruction helpful.
  • Richard from BOULDER, CO
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Removed the failed bake element per the video linked in the Partselect email. Unlike the video on YouTube the PartSelect video shows that the bake element can easily be replaced through the oven door and it is not necessary to slide the range out and remove a rear panel.
Was this helpful?
Thank you for voting!
surface element needed to be replaced along with all the drip Bowls
2 of 4 people found this instruction helpful.
  • Tawnia from SHOW LOW, AZ
  • Really Easy
  • Less than 15 mins
take out the old put in the new
Was this helpful?
Thank you for voting!
The Baking Element won't heat to bake.
1 person found this instruction helpful.
  • Kiara from JACKSONVILLE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
I had the problem before and had to call in a Tech to repair the baking element in my oven. It cost me $150.00 for the repair. This time I decided to do the repair myself, so I went online and found this site The instruction video made it very easy. I am very proud of what I was able to do without calling a Tech. My oven works like new, I t only cost less than $40.00 for the total repair. I am so glad this site were there when I needed them.. Thanks a Lot..
Was this helpful?
Thank you for voting!
Bake element had burnt in half.
1 person found this instruction helpful.
  • Joyce from ROCHESTER, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched the video that was available and followed the instructions. Unplugged the stove first,removed the old element, and put the new one in. Video was very helpful and the installation was very easy. Was done in about 10 minutes.
Was this helpful?
Thank you for voting!
Oven gasket on door was very old. Oven door did not close properly.
1 person found this instruction helpful.
  • Margaret from Clarendon Hills, IL
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Followed a simple video and completed this repair in just 5 minutes, gasket came out easily and the new one went in easily . Cleaning the oven door was the hardest part.
Was this helpful?
Thank you for voting!
Element didn't heat at all
1 person found this instruction helpful.
  • Roger from PATERSON, NJ
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Removed 2 screws, disconnected wires, attached wires to new element, put screws back. Turned oven on. Perfect.
Was this helpful?
Thank you for voting!
Element burned out.
2 of 4 people found this instruction helpful.
  • Raymond from Ottawa, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out aobut 3 inches and disconnected the wires.
Was this helpful?
Thank you for voting!
The oven heating element burned out like a lit fuse!
1 person found this instruction helpful.
  • Herbert from Neenah, WI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 phillips screws, unplugged 2 wires, threw away old element. Installation of the new element was just as easy but in reverse order. Piece of cake!
Was this helpful?
Thank you for voting!
element had cracked
1 person found this instruction helpful.
  • TONI from SALISBURY, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I cut the power to the stove. Then I unscrewed the two screws. Pulled the element out a few inches. I had to use pliers to disconnect it from its wires. It was a very tight fit. Then I reconnected the new element. Cut the power back and and fired her up. Boy did she burn like fire.
Was this helpful?
Thank you for voting!
replacing old drip bowls
1 person found this instruction helpful.
  • Marion J. from Palmetto, FL
  • Really Easy
  • Less than 15 mins
It was so simple & the parts fit perfectly. I appreciated all the help from your sales lady. Thanks again.
Was this helpful?
Thank you for voting!
Just plugged the burner in and it was good to go.
1 person found this instruction helpful.
  • Paola from High Bridge, NJ
  • Really Easy
  • Less than 15 mins
The burner wouldn't work. I just plugged in the new one and all was done.
Was this helpful?
Thank you for voting!
All Instructions for the 3860X
91 - 105 of 421