EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3860X Magic Chef Range - Instructions

All Instructions for the 3860X
121 - 135 of 421

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The old drip bowls were rusting, no chrome left
3 of 7 people found this instruction helpful.
  • kathryn from piqua, OH
  • Really Easy
  • Less than 15 mins
Took the old ones out and put in the new ones! What I am so pleased about it that I just went online and at Parts Select website it was easy to find what I needed, a fair price and the 4 bowls arrived within 2 days!
Was this helpful?
Thank you for voting!
bottom bake element broken and burned
1 person found this instruction helpful.
  • Carolyn S from white oak, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First throw the breaker on the stove. Remove two screws in back of oven then slowly pull out loosen the wire attachements ......got new part in 2 days just as simple reverse the removal directions.,,,I am over 60 female and it was simple.
Was this helpful?
Thank you for voting!
burner receptacle failed (stove over 30 years old)
1 person found this instruction helpful.
  • BETH from COUNCE, TN
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Took out burner (pulls out) Took out one screw that holds recep. in, cut the two old wires and attached new wires with wire nuts included in the new package.
Was this helpful?
Thank you for voting!
lens light was broken and missing.
1 person found this instruction helpful.
  • Allan from Rolla, MO
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Removed the cooktop using screwdriver. Pushed lens-light into cooktop hole.It was difficult to do and was where I spent most of my time. Next time I will spray bottom of lens- light with silicon so it goes in easier. I stood cooktop up on its side and inserted the red light assembly onto the lens-light. Reinstalled cooktop < br />and turned electrical power on.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person found this instruction helpful.
  • Donald from Tomahawk, WI
  • Really Easy
  • 15 - 30 mins
Very simple fix--unpugged two fittings in the back of oven plugged in the new element and it was done.The Best part was that the element burned out on a Sunday and I ordered the part that day and it shipped on Monday and received part on Wed AM.This is the second time I've had to replace the element and by ordering through Part Select I s aved $24.00 versus buying it from an appliance store.

Don Samuelson
Was this helpful?
Thank you for voting!
Lower burner not heating:
1 person found this instruction helpful.
  • John from Fishers, IN
  • Easy
  • 15 - 30 mins
  • Screw drivers
Ordered element and recieved in two days(yea). Removed back cover from unit. Removed two wire slide on wire clips. Then went inside oven cavity and removed two screws holding element intact. The element slid out. Installed element, re-installed two screws to hold element intact. Attached wire clips back on to element, re-attached back cover. Plugged unit back in and it worked perfectly. Eazy-peezy lemon squeezy.

John
Johnny on the Spot Home Repairs
Fishers, Indiana 317-997-3600
Was this helpful?
Thank you for voting!
replace broken bake element
1 person found this instruction helpful.
  • Frances from MOREHEAD, KY
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Unplugged the range. Took our the oven shelves. Unscrewed the bars holding the broken bake element to the back of the oven wall. Gently pulled out the wiring to which the bake element is attached. Slipped the ends of the broken bake element off the ending on the wiring. Then slipped the ends of the new bake element over the ends on the wiring. Then pushed the wiring with attached bake element back into their position behind the oven wall and attached the bars holding the bake element to the back of the oven wall. This is really easy because it is exactly like the on-line video, for I am a 75 year old female with little technical experience.
Was this helpful?
Thank you for voting!
The bake oven element burned out
1 person found this instruction helpful.
  • Robert from LEXINGTON, MA
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Removed two screws and disconnected the element. Reconnected the new element and reinstalled the screws
Was this helpful?
Thank you for voting!
Hinge spring was broken
1 person found this instruction helpful.
  • Lowell from WICHITA, KS
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Pulled the drawer and removed the oven door by pulling it upward. Then removed the two hex head screws which loosened the old hinge and pulled it down out of the side of the oven box. Replaced the new hinge in the position of the old one and installed the two hex head screws. I replaced the oven door and that was when I realized the par t was wrong. The parts description in the view on the website was one number off and I replaced the broken hinge and ordered from another site the right number. That hinge works.
Was this helpful?
Thank you for voting!
original fixture required bulb - this fixture (all-in-one) was great
1 person found this instruction helpful.
  • wesley from ODENVILLE, AL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Pulled range out from cabinet-wall to get to back side, everthing was clearly exposed tlhen. Just a matter of installing new fixture, putting back on, reconnected power source - put range back in proper place.
Was this helpful?
Thank you for voting!
Drip Pans were stained and burned on.
1 person found this instruction helpful.
  • Sandra Collignon from SANTA CLAUS, IN
  • Really Easy
  • 30 - 60 mins
Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.
Was this helpful?
Thank you for voting!
Replace the lower oven element
1 person found this instruction helpful.
  • Tom from ROCKTON, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the 220 cord..remove rear metal back ( 7-8 Ph/screws)... disconnect the red & yellow connectors from the back of the lower element. Remove-the-lift-off Oven door. Remove the two Ph/screws (one on either end of the element) At the very rear of the oven. Install the new element and reverse the about to reassemble.
Was this helpful?
Thank you for voting!
oven didn't heat up
1 person found this instruction helpful.
  • robert from merrimack, NH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed the old element by taking out two screws then removed the two wires. pulled out the old element , put the new one in . connected the wires and screwed it in. Done.
Was this helpful?
Thank you for voting!
The element was completely gone.
1 person found this instruction helpful.
  • Hudson from Cockeysville, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned off power, removed 2 screws, un-hooked the connections, them put in the new element in reverse order.
Was this helpful?
Thank you for voting!
No Bake, only Broil
1 person found this instruction helpful.
  • Edward from Adamstown, MD
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
POWER OFF! Unplugged oven from wall.

(Note: I found it easier to disconnect the wires from the element by removing the rear cover. Fumbling around inside the oven was getting me nowhere.)

Removed rear cover.
Disconnected old element.
Unscrewed the old element from inside the oven, removed, and installed t he new element. Screwed the new element in place.
Reconnected wires in back, installed the back cover.
Connected power.
Tested. Good as new.
Was this helpful?
Thank you for voting!
All Instructions for the 3860X
121 - 135 of 421