3845 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
the plastic vegitable bin cracked
5 of 6 people
found this instruction helpful.
-
Catherine from Clinton Twp., MI
- Really Easy
- Less than 15 mins
even my three year old grandson could do this one! open the door slide the old tray all the way out and slide the new one in. wha-la! Actually I was very impressed at the ordering process since I could actually see a picture of the bin in its actual use not just some obscure number with a vague discription. I'm a visual person so this
... Read more
made it extremely easy to see what I was ordering. No guess work.
Read less
Was this helpful?
Thank you for voting!
A rat had chewed half of all four blades off
9 of 18 people
found this instruction helpful.
-
Curtis from Dothan, AL
- Really Easy
- Less than 15 mins
-
Nutdriver
First I removed the left condensor fan motor bracket nut, loosened the right motor bracket, dropped the moter bracket down freeing the motor from the rubber grommets.
Pulled the fan off from the motor shaft, pressed the new fan on the shaft and installed new grommets. Replaced the motor bracket and tightened the right bracket nut an ... Read more d checked fan for clearance and free spin. Reinstaled the left bracket nut. Turned on the refrigerator and checked fan for action. Everything worked great.
I did not know the fan replacement came with a compression ring already installed, so now I have an extra compression ring.
Pulled the fan off from the motor shaft, pressed the new fan on the shaft and installed new grommets. Replaced the motor bracket and tightened the right bracket nut an ... Read more d checked fan for clearance and free spin. Reinstaled the left bracket nut. Turned on the refrigerator and checked fan for action. Everything worked great.
I did not know the fan replacement came with a compression ring already installed, so now I have an extra compression ring.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
EVAP fan motor wore out, fan hits flange in back panel
5 of 7 people
found this instruction helpful.
-
James from Okeechobee, FL
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
Took back out of freezer compartment, pulled plug and removed old motor, inserted new parts. It was
easy and the parts arrived the day after I ordered
online, even though I chose the cheapest shipping
option. Nothing in my freezer had a chance to thaw
out.
easy and the parts arrived the day after I ordered
online, even though I chose the cheapest shipping
option. Nothing in my freezer had a chance to thaw
out.
Other Parts Used:
Was this helpful?
Thank you for voting!
missing a shelf
6 of 10 people
found this instruction helpful.
-
Joseph from Rome, NY
- Really Easy
- Less than 15 mins
My repair was simple. Just put the shelf in the holes in the freezer. The AMAZING thing was how quickly I recieved the part after placing my order. I placed the order at about 3:30 pm on a friday checked the box for ground shipping and the part was at my door the next morning. I think that was a mistake, but I was impressed.
Was this helpful?
Thank you for voting!
freezer cold but refrigerator warm, would not cycle the defrost on freezer
4 of 4 people
found this instruction helpful.
-
MATT from OAKLAND, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
two screws and a connector were removed to replace the timer.
Timer was located on the top front of fridge
Timer was located on the top front of fridge
Was this helpful?
Thank you for voting!
Gasket was torn and falling off customer was holding it in place with tape.
4 of 4 people
found this instruction helpful.
-
Joel from WESLACO, TX
- Really Easy
- Less than 15 mins
I opened the fridge door removed the tape the customer had on it to keep in place. Gasket was super worn out I pulled in it to remove it. Cleaned it where the new gasket was gonna insert. Put the new gasket in place and with my thumb applied some pressure till I heard a small snap. Did the same all the way around and closed and opened the
... Read more
door to check it all around making sure it was in place and sealing all around.
Read less
Was this helpful?
Thank you for voting!
Freezer door gasket was not sealing
4 of 4 people
found this instruction helpful.
-
Reginald from VERO BEACH, FL
- Really Easy
- Less than 15 mins
Went on YouTube and it had excellent instructions for removal and installation
Was this helpful?
Thank you for voting!
Cracked shelf
4 of 4 people
found this instruction helpful.
-
Joan from SHELTON, WA
- Very Easy
- Less than 15 mins
Removed and replaced
Was this helpful?
Thank you for voting!
Freezer door would not close all the way.
4 of 4 people
found this instruction helpful.
-
Paul from LINCOLN, DE
- Very Easy
- Less than 15 mins
-
Socket set
Pulled the door off easily and noticed that the spacer on the Center hinge was ground down to nothing and that a small screw in the bottom plate of the door was half way out. This screw would catch on the cabinet Center hinge bracket and stopped the door from closing. Problem was solved by tightening the screw and putting in a new "spac
... Read more
er" that kept the small screws from contacting the Center hinge bracket. The freezer door now closes like new.
Read less
Was this helpful?
Thank you for voting!
top freezer working, bottom section of the fridge not cooling
6 of 10 people
found this instruction helpful.
-
Michael from Jamaica, NY
- Easy
- 15 - 30 mins
-
Screw drivers
First I removed the two screws, the fan and unpluged the electrical connection. Then, plugged in the new part and then screw it back together.
Was this helpful?
Thank you for voting!
The refrigerator would not stop running, resulting in frozen food in the refrigerator compartment.
4 of 4 people
found this instruction helpful.
-
George from W MELBOURNE, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
After reading the trouble shooting section of the owners manual, I determined, without much difficulty, that the temp control was defective. I checked some local outlets and found the prices running from $36.00 and up. The same part from this site was around $20.00. Guess where I bought mine! It arrived in a timely fashion, and I inst
... Read more
alled it with no problem, in about 10 - 15 minutes. This was a very easy job, just remove and replace three wires snap the unit into place, and screw the cover on. Tip: I always use you tube or another source to get some instruction, just in case I'm not as smart as I think I am!
Read less
Was this helpful?
Thank you for voting!
Bad defrost timer
5 of 7 people
found this instruction helpful.
-
Bruce from Silver Spring, MD
- Really Easy
- 15 - 30 mins
-
Screw drivers
Parts Select made this an effortless process. From finding the part, ordering, to the online diagrams.
I'll be back...
I'll be back...
Was this helpful?
Thank you for voting!
The lights were on inside however the the water/ice dispenser did not work and the fridge and freezer side was not cooling
5 of 7 people
found this instruction helpful.
-
Rickey from DUMAS, AR
- Really Easy
- 30 - 60 mins
-
Socket set
Simply take off the back panel. Remove the old run capacitor which is attached to the compressor by a white part. It pulls right off. You will have to unplug two wires. I took a pic to ensure I plugged the wires back up the correct way. Then I attached the new capacitor to the white part and put on the sleeve that was included, plugge
... Read more
d it back into the compressor and zip tied the excess part of the sleeve. Once done plug fridge back up (always unplug electric devices when doing maintenance) to check before replacing back panel. It may take a few minutes before it kicks on.
Read less
Was this helpful?
Thank you for voting!
noise from fan blade hitting refrigerator interior panel.
4 of 4 people
found this instruction helpful.
-
Dennis from LEHIGHTON, PA
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers, Socket set
The hardest part of the repair was emptying the freezer, next was getting the fan off of the motor shaft, The only reason the job was difficult is because i am 67 years old and not as flexible as i used to be.I had a tough time getting the fan off of the motor shaft, but i got it off with the use of a vise, and had to use the hammer and a
... Read more
socket to install a new fan blade.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Howling motor
4 of 4 people
found this instruction helpful.
-
Gregg from COEUR D ALENE, ID
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver
Open freezer, remove rack....this got a little complicated because I had to remove the door, that required the offset screwdriver because I had a clearance issues preventing the door from opening all the way. Remove the panel covering the fan, unplug the fan, remove it from bracket, install new fan, plug in, replace panel, replace rack, r
... Read more
eplace door...bam all done!
Read less
Was this helpful?
Thank you for voting!