EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3845 - Instructions

All Instructions for the 3845
61 - 75 of 360

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
evap.motor burned out
7 of 9 people found this instruction helpful.
  • gerald from ardmore, PA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
common sense,removed plate,removed mounting bracked,unplugged,reversed order,and that was it.
Was this helpful?
Thank you for voting!
Bottom door hinge was lost during move
10 of 18 people found this instruction helpful.
  • Dustin from Marlow, OK
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I had lost the bottom hinge during a move and so I rigged the hinge using an old tv antenna and the door never really quite worked right and it was VERY annoying. I stumbled upon this site and was surprised how inexpensive the part I needed was. I was very impressed with the speed of shipping and the install took maybe 5 minutes. The f ridge works as good as new. Thanks a ton!
Was this helpful?
Thank you for voting!
compressor not starting
9 of 15 people found this instruction helpful.
  • H.K. from Seagoville, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Refrigerator is not cooling. Light and fan working. Changed the capacitor.. Still not cooling. Back to discovery mode.It may be the timer
Certainly not PartSelect's fault. They have great service.
Was this helpful?
Thank you for voting!
refrigerator wasn't cooling but the freezer was working properly
6 of 6 people found this instruction helpful.
  • Don from BELLVILLE, TX
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
From instructions found on the site I was directed to the defrost timer part being bad. And from the information others posted that have had the same problem I was able to replace that part by removing the bottom grill just below the door and on the left side was the part. Removing one screw to remove the bracket from the frame and then another screw to remove the part from the bracket. I found it easier to remove the part from the bracket before I pulled the part out so I would have more room to unplug the connector. Just reverse the steps to replace the new part. It took about a day or so for the refrigerator to get to the proper temp.
Was this helpful?
Thank you for voting!
Bar end cap broke
6 of 7 people found this instruction helpful.
  • Bushnell from Gulf Shores, AL
  • Really Easy
  • Less than 15 mins
Easy fix - snapped together.
Was this helpful?
Thank you for voting!
Fan Motor was Noisy
6 of 7 people found this instruction helpful.
  • albert from patterson, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench set
4 screws in the freezer and the back panel came off then 2 more screws to take the motor off. I unpluged the old motor pluged in the new motor put the back panel back on and I was done.
Was this helpful?
Thank you for voting!
no shelf in my freezer
7 of 11 people found this instruction helpful.
  • Barbara from Brookfield, IL
  • Really Easy
  • Less than 15 mins
first I ordered parts that didn't work. the return process was painless and I found the part I needed, which just popped right in!
Was this helpful?
Thank you for voting!
door dairy was broken
8 of 14 people found this instruction helpful.
  • Richard from Millbrae, CA
  • Really Easy
  • Less than 15 mins
Repair was a no brainer. More important, Part Select was extremely efficient. Customer Service was very helpful as my model number was not available on line. Thanks for your wonderful and prompt service. Rich L.
Was this helpful?
Thank you for voting!
light not working
7 of 11 people found this instruction helpful.
  • robert from FRANKLIN SQ, NY
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I used pliers to pull lightly on the head of the switch, while I inserted a small flat head screw driver into the base of switch and gently worked around the edges to free it from the panel.
Was this helpful?
Thank you for voting!
Refrigerator to warm
5 of 5 people found this instruction helpful.
  • Lloyd from PITTSBURG, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Instructions say run capacitor is by motor, but on this frige its in the refrigerator compartment. The capacitors looks different, one square and the other long
Was this helpful?
Thank you for voting!
NOISY
5 of 5 people found this instruction helpful.
  • Paul from NANTUCKET, MA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
I FOLLOWED YOUR VIDEO............WAS EASY. THANKS
Was this helpful?
Thank you for voting!
Loud screeching noise from freezer during cooling cycle
5 of 5 people found this instruction helpful.
  • Gabriel from WASHINGTON, DC
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
I replaced the fan motor and one of the grommets. When I took the motor out it was clear it was failing because there were metal flakes from the motor on the fan blade. I followed the instructions on the posted video. My model did not have a removable bottom tray in the freezer so that was one less thing to do. Aside from that the vide o was accurate. I had two minor problems during reinstallation. First, it was very difficult to get the spring clamp back on the fan blade without pushing it against the motor. Recommend you get someone to help hold the spring open while you push it on. Second, the length of wire on the replacement was not exactly the same as the original and I had to move some wires around. Recommend you take a picture of the cable layout before disassembling.
Was this helpful?
Thank you for voting!
Noisy freezer fan
6 of 9 people found this instruction helpful.
  • Robert from PITTSBURGH, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Fast and easy-great video instructions for each part ordered.
All parts perfect fit.
My refrigerator is running like new again-good for another 10 years!
Was this helpful?
Thank you for voting!
refrigerator evaporator fan noise
6 of 9 people found this instruction helpful.
  • Alan from Sunapee, NH
  • Easy
  • 15 - 30 mins
  • Screw drivers
Despite attempts to quiet the 2 year old fan, I went ahead and replaced it. Part Select was prompt with a new one at my door less than 24 hours. It was just the fan motor, so took a couple extra steps to place it in the metal housing, but no problems and though the frig still makes noises, it's not coming from the fan as before.
Was this helpful?
Thank you for voting!
Frig too warm
5 of 6 people found this instruction helpful.
  • Judith from Port Mansfield, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Followed the instructions on the repair video and it made very easy. Also saved us a lot of money. Thanks for your help.
Was this helpful?
Thank you for voting!
All Instructions for the 3845
61 - 75 of 360