EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3834 - Instructions

All Instructions for the 3834
61 - 75 of 320

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fan Motor was Noisy
6 of 7 people found this instruction helpful.
  • albert from patterson, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench set
4 screws in the freezer and the back panel came off then 2 more screws to take the motor off. I unpluged the old motor pluged in the new motor put the back panel back on and I was done.
Was this helpful?
Thank you for voting!
no shelf in my freezer
7 of 11 people found this instruction helpful.
  • Barbara from Brookfield, IL
  • Really Easy
  • Less than 15 mins
first I ordered parts that didn't work. the return process was painless and I found the part I needed, which just popped right in!
Was this helpful?
Thank you for voting!
door dairy was broken
8 of 14 people found this instruction helpful.
  • Richard from Millbrae, CA
  • Really Easy
  • Less than 15 mins
Repair was a no brainer. More important, Part Select was extremely efficient. Customer Service was very helpful as my model number was not available on line. Thanks for your wonderful and prompt service. Rich L.
Was this helpful?
Thank you for voting!
light not working
7 of 11 people found this instruction helpful.
  • robert from FRANKLIN SQ, NY
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I used pliers to pull lightly on the head of the switch, while I inserted a small flat head screw driver into the base of switch and gently worked around the edges to free it from the panel.
Was this helpful?
Thank you for voting!
Refrigerator to warm
5 of 5 people found this instruction helpful.
  • Lloyd from PITTSBURG, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Instructions say run capacitor is by motor, but on this frige its in the refrigerator compartment. The capacitors looks different, one square and the other long
Was this helpful?
Thank you for voting!
NOISY
5 of 5 people found this instruction helpful.
  • Paul from NANTUCKET, MA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
I FOLLOWED YOUR VIDEO............WAS EASY. THANKS
Was this helpful?
Thank you for voting!
Loud screeching noise from freezer during cooling cycle
5 of 5 people found this instruction helpful.
  • Gabriel from WASHINGTON, DC
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
I replaced the fan motor and one of the grommets. When I took the motor out it was clear it was failing because there were metal flakes from the motor on the fan blade. I followed the instructions on the posted video. My model did not have a removable bottom tray in the freezer so that was one less thing to do. Aside from that the vide o was accurate. I had two minor problems during reinstallation. First, it was very difficult to get the spring clamp back on the fan blade without pushing it against the motor. Recommend you get someone to help hold the spring open while you push it on. Second, the length of wire on the replacement was not exactly the same as the original and I had to move some wires around. Recommend you take a picture of the cable layout before disassembling.
Was this helpful?
Thank you for voting!
Noisy freezer fan
6 of 9 people found this instruction helpful.
  • Robert from PITTSBURGH, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Fast and easy-great video instructions for each part ordered.
All parts perfect fit.
My refrigerator is running like new again-good for another 10 years!
Was this helpful?
Thank you for voting!
refrigerator evaporator fan noise
6 of 9 people found this instruction helpful.
  • Alan from Sunapee, NH
  • Easy
  • 15 - 30 mins
  • Screw drivers
Despite attempts to quiet the 2 year old fan, I went ahead and replaced it. Part Select was prompt with a new one at my door less than 24 hours. It was just the fan motor, so took a couple extra steps to place it in the metal housing, but no problems and though the frig still makes noises, it's not coming from the fan as before.
Was this helpful?
Thank you for voting!
A rat had chewed half of all four blades off
9 of 18 people found this instruction helpful.
  • Curtis from Dothan, AL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
First I removed the left condensor fan motor bracket nut, loosened the right motor bracket, dropped the moter bracket down freeing the motor from the rubber grommets.
Pulled the fan off from the motor shaft, pressed the new fan on the shaft and installed new grommets. Replaced the motor bracket and tightened the right bracket nut an d checked fan for clearance and free spin. Reinstaled the left bracket nut. Turned on the refrigerator and checked fan for action. Everything worked great.
I did not know the fan replacement came with a compression ring already installed, so now I have an extra compression ring.
Was this helpful?
Thank you for voting!
the plastic vegitable bin cracked
5 of 6 people found this instruction helpful.
  • Catherine from Clinton Twp., MI
  • Really Easy
  • Less than 15 mins
even my three year old grandson could do this one! open the door slide the old tray all the way out and slide the new one in. wha-la! Actually I was very impressed at the ordering process since I could actually see a picture of the bin in its actual use not just some obscure number with a vague discription. I'm a visual person so this made it extremely easy to see what I was ordering. No guess work.
Was this helpful?
Thank you for voting!
Frig too warm
5 of 6 people found this instruction helpful.
  • Judith from Port Mansfield, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Followed the instructions on the repair video and it made very easy. Also saved us a lot of money. Thanks for your help.
Was this helpful?
Thank you for voting!
EVAP fan motor wore out, fan hits flange in back panel
5 of 7 people found this instruction helpful.
  • James from Okeechobee, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers, Screw drivers
Took back out of freezer compartment, pulled plug and removed old motor, inserted new parts. It was
easy and the parts arrived the day after I ordered
online, even though I chose the cheapest shipping
option. Nothing in my freezer had a chance to thaw
out.
Was this helpful?
Thank you for voting!
Gasket was torn and falling off customer was holding it in place with tape.
4 of 4 people found this instruction helpful.
  • Joel from WESLACO, TX
  • Really Easy
  • Less than 15 mins
I opened the fridge door removed the tape the customer had on it to keep in place. Gasket was super worn out I pulled in it to remove it. Cleaned it where the new gasket was gonna insert. Put the new gasket in place and with my thumb applied some pressure till I heard a small snap. Did the same all the way around and closed and opened the door to check it all around making sure it was in place and sealing all around.
Was this helpful?
Thank you for voting!
The refrigerator would not stop running, resulting in frozen food in the refrigerator compartment.
4 of 4 people found this instruction helpful.
  • George from W MELBOURNE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
After reading the trouble shooting section of the owners manual, I determined, without much difficulty, that the temp control was defective. I checked some local outlets and found the prices running from $36.00 and up. The same part from this site was around $20.00. Guess where I bought mine! It arrived in a timely fashion, and I inst alled it with no problem, in about 10 - 15 minutes. This was a very easy job, just remove and replace three wires snap the unit into place, and screw the cover on. Tip: I always use you tube or another source to get some instruction, just in case I'm not as smart as I think I am!
Was this helpful?
Thank you for voting!
All Instructions for the 3834
61 - 75 of 320