EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3822 - Instructions

All Instructions for the 3822
91 - 105 of 405

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Couldn't find correct drip bowls that fit.
2 of 4 people found this instruction helpful.
  • Lowell from Hardin, KY
  • Really Easy
  • Less than 15 mins
Removed old drip bowls, removed burners installed new drip bowls,installed burners. They fit perfect and I received them two days after ordering.
Was this helpful?
Thank you for voting!
ELECTRIC BURNER SUPPORT FELL OFF AND BURNER SOMETIMES WOULD NOT COME ON.
1 person found this instruction helpful.
  • RICHARD from SHOW LOW, AZ
  • Very Easy
  • Less than 15 mins
Stuck the new one into the plugin.
Was this helpful?
Thank you for voting!
My original back leg broke because the floor is uneven. Had to pull it out several times.
1 person found this instruction helpful.
  • Phyllis from BROWNVILLE, NY
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
Put the back of stove on blocks of wood to get high enough to screw the new leg in.
Was this helpful?
Thank you for voting!
bottom bake element broken and burned
1 person found this instruction helpful.
  • Carolyn S from white oak, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First throw the breaker on the stove. Remove two screws in back of oven then slowly pull out loosen the wire attachements ......got new part in 2 days just as simple reverse the removal directions.,,,I am over 60 female and it was simple.
Was this helpful?
Thank you for voting!
The old drip bowls were rusting, no chrome left
3 of 7 people found this instruction helpful.
  • kathryn from piqua, OH
  • Really Easy
  • Less than 15 mins
Took the old ones out and put in the new ones! What I am so pleased about it that I just went online and at Parts Select website it was easy to find what I needed, a fair price and the 4 bowls arrived within 2 days!
Was this helpful?
Thank you for voting!
element had cracked
1 person found this instruction helpful.
  • TONI from SALISBURY, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I cut the power to the stove. Then I unscrewed the two screws. Pulled the element out a few inches. I had to use pliers to disconnect it from its wires. It was a very tight fit. Then I reconnected the new element. Cut the power back and and fired her up. Boy did she burn like fire.
Was this helpful?
Thank you for voting!
The element was completely gone.
1 person found this instruction helpful.
  • Hudson from Cockeysville, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned off power, removed 2 screws, un-hooked the connections, them put in the new element in reverse order.
Was this helpful?
Thank you for voting!
burner would not heat.
1 person found this instruction helpful.
  • Jackie from Hughes Springs, TX
  • Really Easy
  • Less than 15 mins
I unpluged the old burner and pluged the new one in. Repair done in about 2 min,
Was this helpful?
Thank you for voting!
Bake Element shorted out
1 person found this instruction helpful.
  • Laurie from Clarence, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I first shut off the breaker to the stove - safety first!

I used a phillips screw driver to remove the two screws that held the old element in. Then I pulled the old element out and used the pliers to remove the electrical connections. I put the new element in, made the electrical connections and secured it with the screws. After restoring powere via the breaker, we tested the stove and it worked. Just call me the Maytag Man!
Was this helpful?
Thank you for voting!
bakeing element caught fire.
1 person found this instruction helpful.
  • Leticia from Sunnyvale, CA
  • Really Easy
  • Less than 15 mins
First I turned off power to the range at the fuse box (very important-The last time I didn't do this and ended up paying a repairman $150.00 to replace the damaged connectors). I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I then connected the new ele ment, pushed the element back in and replaced the screws. Turned the power back on and tested the element. The whole job took about 30 minutes because I had trouble disconnecting the old element. I used the flat end of the scrapper to push against the connector while I pulled the element out. Normally it would take only about 15 minutes.
Was this helpful?
Thank you for voting!
Previous element burnt up
1 person found this instruction helpful.
  • Betsy from Sun City, AZ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I let my husband to the work...But it was very easy. I could have done it! He removed the screws, pulled the wires off previous element. Reattached the wires to the new element and screwed the ends back in place.
Was this helpful?
Thank you for voting!
My oven sparked, then wasn't working, so I turned to the internet.
1 person found this instruction helpful.
  • Joan from Medford, OR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I received the new element on the third day, followed simple directions, and voila! I'm baking again.
First I unplugged the stove. Important!. Then with a phillips head screwdriver I removed the two screws at the back of the oven. The transition from busted to new was easy because there was a slide-in connection to the wires, not screws. The best advice was sticking duct tape on the wires so they wouldn't go back into the inner sanctum before I was able to attach the new element. Hey, I'm a 72-year-old grandma, and it was easy!
Was this helpful?
Thank you for voting!
element burnt into.
1 person found this instruction helpful.
  • John from Overton, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The part came quick and packed very well. I moved the stove out and un pluged it. opened oven door and took a philips screwdriver and took the screws out at the back of element..Slid it out with the two wires attached and unpluged the conectors. pluged the conectors on to the new element and slid it back in. Had a chocolate cake in 35 minuts.
Thanks, John in Texas
Was this helpful?
Thank you for voting!
Bake Element broke
1 person found this instruction helpful.
  • Joseph from Warwick, RI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
****Threw the breaker switch for the oven to the 'off' position****. Opened the oven. Unscrewed the phillips head screws at the back of the old element. Removed the connecting wire, taping them to the stove so that they wouldn't recede into the hole. Securely attached the connecting wires to the new element. Pushed the wires back into th e holes in the stove. Removed the tape from the oven. Screwed the element into place. ****Threw the breaker switch back to the 'on' position****. Process took under 10 minutes.

DO NOT FORGET TO UNPLUG OR TURN OFF BREAKER BEFORE DOING ANYTHING WITH THE WIRES. Don't forget to turn it back on again when you are done.
Was this helpful?
Thank you for voting!
hot spot in center of bake element appeared suggesting failure was imminent
1 person found this instruction helpful.
  • burton from prides crossing, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
pulled breaker,removed oven door,removed 2 screws,pulled bake element out 3 inches,pulled connections off,pushed connectors on new element,pushed new element back and replaced screws,replaced oven door ,pushed breaker back and turned on oven and let it heat up to 350 degrees.
Total time 10 minutes,even a caveman could do it.
Was this helpful?
Thank you for voting!
All Instructions for the 3822
91 - 105 of 405