EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3822 - Instructions

All Instructions for the 3822
106 - 120 of 405

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
BurntBaking Element Element
1 person found this instruction helpful.
  • Matt from Lewisburg, TN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turn Off the BREAKER!!!
Unplug the stove/oven
Opened the oven door
Unscrewed the baking element for the oven
Pulled the old element out about 3"
Disconnected the wire clip on both sides
Plugged the element into the clips
Screwed element back into place
Plugged oven in ,turned on breaker
PREST O DONE
Was this helpful?
Thank you for voting!
Bake element would no longer heat up
1 person found this instruction helpful.
  • Joe from Schertz, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I unplug the stove first. Then took off two screws that held the bake element in place. Pulled off the connectors using the pliers. Had to use pliers because they were really snug. Plug in the wires to the new base element. Crimped down the connectors a little bit to make sure they were snug. Inserted the bake element back into the holes at the back of the oven. Put the two screws back in. Plugged the oven back in and turned it on to make sure it worked. Lastly, tossed the old bake element in the trash. Really easy job. Glad I didn't pay anybody to do this.
Was this helpful?
Thank you for voting!
snapped element
1 person found this instruction helpful.
  • Paul from Yukon, OK
  • Easy
  • Less than 15 mins
  • Screw drivers
switch off the range. undo the two screws & unplug the two tabs. Replace with new element, connect two tabs, screw back in place. done!
recieved my replacement part the next day after ordering
Was this helpful?
Thank you for voting!
Element burned out.
1 person found this instruction helpful.
  • Wayne from Marietta, GA
  • Easy
  • Less than 15 mins
  • Screw drivers
Turn off breaker.
Unscrew old element, disconnect wires.
Connect wires to new element, tighten screws.
Breaker back to ON.
Done.
Was this helpful?
Thank you for voting!
Bake Element Melted
1 person found this instruction helpful.
  • Bert from S. Easton, MA
  • Easy
  • Less than 15 mins
  • Screw drivers
Unplugged stove, unscrewed element pulled element out about 3 inces and disconnected element. Took model of stove looked on line for part. PartSelect had the best price and easiest web site to order part. Ordered part about 4pm and received part in 2 days. Took element out of box plug into connections and screwed the element back in. Plugged stove in and worked perfect.
Was this helpful?
Thank you for voting!
replacing old drip bowls
1 person found this instruction helpful.
  • Marion J. from Palmetto, FL
  • Really Easy
  • Less than 15 mins
It was so simple & the parts fit perfectly. I appreciated all the help from your sales lady. Thanks again.
Was this helpful?
Thank you for voting!
Element burned in half
1 person found this instruction helpful.
  • James from Allyn, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took two screws out unplugged the element and plugged the new one in and replaced the screws and turned the breaker back on. Works great...Piece of cake..jk
Was this helpful?
Thank you for voting!
fireworks in the oven. Burned completely in two.
1 person found this instruction helpful.
  • Shelly from Allentown, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
My husband has moved out of state for his job. I am left here with the children until the house sells. This is the first time I have ever had to do any oven repair. I had excellent and fast service - my part came right away. I took out the 2 screws holding the element in place, pulled the element out, disconnected the old element, connect ed the new one, pushed it back in, and replaced the screws. No problem at all. I was a little nervous turning it all back on, but it is working perfectly!
Was this helpful?
Thank you for voting!
Bake element had burnt in half.
1 person found this instruction helpful.
  • Joyce from ROCHESTER, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched the video that was available and followed the instructions. Unplugged the stove first,removed the old element, and put the new one in. Video was very helpful and the installation was very easy. Was done in about 10 minutes.
Was this helpful?
Thank you for voting!
Element burned out.
2 of 4 people found this instruction helpful.
  • Raymond from Ottawa, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out aobut 3 inches and disconnected the wires.
Was this helpful?
Thank you for voting!
The oven heating element burned out like a lit fuse!
1 person found this instruction helpful.
  • Herbert from Neenah, WI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 phillips screws, unplugged 2 wires, threw away old element. Installation of the new element was just as easy but in reverse order. Piece of cake!
Was this helpful?
Thank you for voting!
Wife said stove was on fire - Oven element shorted.
1 person found this instruction helpful.
  • James from Hoyt Lakes, MN
  • Easy
  • 30 - 60 mins
  • Screw drivers
Removed the old element by removing 2 screws and disconnecting two solderless connectors. One solderless connector was melted in two. I had to remove the rear panel and cut the old connector off and crimped on a new solderless connector. The time required was lengthened due to trip to the hardware store to get a new connector. While I was fixing the oven element my wife replaced the oven light.
Was this helpful?
Thank you for voting!
original fixture required bulb - this fixture (all-in-one) was great
1 person found this instruction helpful.
  • wesley from ODENVILLE, AL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Pulled range out from cabinet-wall to get to back side, everthing was clearly exposed tlhen. Just a matter of installing new fixture, putting back on, reconnected power source - put range back in proper place.
Was this helpful?
Thank you for voting!
Replace the lower oven element
1 person found this instruction helpful.
  • Tom from ROCKTON, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the 220 cord..remove rear metal back ( 7-8 Ph/screws)... disconnect the red & yellow connectors from the back of the lower element. Remove-the-lift-off Oven door. Remove the two Ph/screws (one on either end of the element) At the very rear of the oven. Install the new element and reverse the about to reassemble.
Was this helpful?
Thank you for voting!
Drip Pans were stained and burned on.
1 person found this instruction helpful.
  • Sandra Collignon from SANTA CLAUS, IN
  • Really Easy
  • 30 - 60 mins
Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.
Was this helpful?
Thank you for voting!
All Instructions for the 3822
106 - 120 of 405