38187 General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Condensor fan blade cracked, blade was sheared off.
3 of 4 people
found this instruction helpful.
-
Bradley from Cedarburg, WI
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
First, remove the cardboard cover on the back, lower portion of the refrigerator.
Next, locate the condensor fan motor assembly and blade. (Right side as you are facing)
Using a pliers, hold the shaft to keep it from turning and prevent damage to the motor. Using a screwdriver, slide the old ring compression on the b ... Read more lade shaft toward the motor (away from the fan blades) to loosen.
Remove old blade from the shaft by firmly grasping the motor shaft with a pliers (to prevent from damaging) and pull the blade assembly off.
Reverse the above steps to attach the new blade.
Next, locate the condensor fan motor assembly and blade. (Right side as you are facing)
Using a pliers, hold the shaft to keep it from turning and prevent damage to the motor. Using a screwdriver, slide the old ring compression on the b ... Read more lade shaft toward the motor (away from the fan blades) to loosen.
Remove old blade from the shaft by firmly grasping the motor shaft with a pliers (to prevent from damaging) and pull the blade assembly off.
Reverse the above steps to attach the new blade.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
switchlight on my refrigerator was not working
5 of 10 people
found this instruction helpful.
-
Eileen from Coto de Caza, CA
- A Bit Difficult
- 30 - 60 mins
-
Pliers
I found instructions on the web about how to do this repair, so I ordered the part with confidence. But the instructions simply said "pull out the old switchlight". That was actually somewhat difficult as the clip on the side intended to hold the part in was stubborn. I eventually used a utility to slice off the clip. From that point,
... Read more
it was just a matter of plugging in the new switchlight , which was very simple.
Read less
Was this helpful?
Thank you for voting!
Loud noise coming from freezer. Evaporater fan was still spinning but making loud noise
2 of 2 people
found this instruction helpful.
-
Joseph from TRAVERSE CITY, MI
- Very Easy
- Less than 15 mins
-
Nutdriver
Removed fan housing from top of freezer, then the two screws holding the rest of it in place. Then two more screw and removed the vertical housing in back of freezer. two more screws and I was able to remove the whole back plate. I unplugged evap motor wire from back of freezer wall and unscrewed motor bracket. once motor was free, I remo
... Read more
ved the blade, unscrewed ground wire and installed new motor. I then plugged wire back in to ensure new motor worked and put everything back. Super Easy!!
Read less
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people
found this instruction helpful.
-
Gerald from WINTERVILLE, GA
- Very Easy
- Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
Right arm of bottom drawers broken.
2 of 2 people
found this instruction helpful.
-
Tammy from ELLISVILLE, MO
- Very Easy
- Less than 15 mins
-
Screw drivers
I pulled off the plastic strip that says “ vegetables” on one side “fruit” on the other. That exposed screws on the left and right sides. I unscrewed both sides I did the same to the back support arm put the new arm in and it works great! The man who helped me at part select was so patient and so kind and helping me select the right piece
... Read more
to begin with to make sure I had the right model number. Could’ve had a better experience with the repair company. Tammy Peterson
Read less
Was this helpful?
Thank you for voting!
refrigerator would not get cold
2 of 2 people
found this instruction helpful.
-
George from BERLIN, MD
- Very Easy
- 15 - 30 mins
-
Nutdriver
got on part select web site and found other customers that had same problem and on their site they had comments from them to fix problem. I then took off back panel on frig where compressor is by removing 6 screws and found the relay attached to the compressor then pressing down on holding spring removed 2 wire alligator clips and it was
... Read more
bad ordered one from part select put the new one on an frig was fixed. entire fix took about 30 minutes from isolating problem to fixing it. thank you part select
Read less
Was this helpful?
Thank you for voting!
Light out
2 of 3 people
found this instruction helpful.
-
Jodi from Benton Harbor, MI
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
Turned off the breaker to the fridge because I couldn't reach the power plug to unplug it . Use small flat head screwdriver to pop out the piece, disconnected the rubber prong connectors, inserted the new piece into the rubber prongs snapped it back into place. Flipped the breaker back on and prayed it worked. It did and I saved myself $
... Read more
120 service call.
Read less
Was this helpful?
Thank you for voting!
Light would no longer turn on
3 of 6 people
found this instruction helpful.
-
paypal_shipping_address from Ripon, CA
- Really Easy
- Less than 15 mins
-
Pliers
I watched the video online, followed the instructions and within minutes had the part installed. The frig light was working once again! I will say the original switch was very snug and I had to do some very minor scraping of the plastic to get the new part to slide in.
Was this helpful?
Thank you for voting!
broken part
2 of 3 people
found this instruction helpful.
-
Michael from E. Hartland, CT
- Really Easy
- Less than 15 mins
-
Nutdriver
easy - replaced it
i am totally impressed with your company how effective it is.... i will go to yours if anything is broken or replaced
thanks
i am totally impressed with your company how effective it is.... i will go to yours if anything is broken or replaced
thanks
Was this helpful?
Thank you for voting!
Noise in the back of freezer
3 of 6 people
found this instruction helpful.
-
MaryLou from Levittown, NY
- A Bit Difficult
- Less than 15 mins
I must thank yo for sending the fan so fast. If I ever have to deal with any appliance again, you are first on my list.
Was this helpful?
Thank you for voting!
freezer worked but thelower part where the milk and the fruit are was warm checked on your site to get help and you were on the money with telling me it was the thermostat i orderd it and it solved the problem thank you.
2 of 3 people
found this instruction helpful.
-
david from torrington, CT
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
i took the backing off with a screwdriver, cut the wires and put the 2 wires on that came with the thermostat. p.s. make sure you pull the power plug before you start.
Was this helpful?
Thank you for voting!
Defroster fan burned up
3 of 6 people
found this instruction helpful.
-
Peter M. from Lincoln Park, NJ
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set
First I removed the ice tray rack lifting it out of the way to reach the back cover of the fan. Then, the whole back inside panel had to be removed. Two screws removed the fan and bracket from the freezer unit. The missing bumper lid just snapped into place. Replaced everything in reverse order. Pretty easy job.
Was this helpful?
Thank you for voting!
Evaporator coil freeze up
1 person
found this instruction helpful.
-
Michael from BRADENTON, FL
- Really Easy
- 30 - 60 mins
-
Nutdriver
Up plug from wall removed rear access cover in freezer let thaw out and replace two wire sensor had previously checked out knowing the defrost strip was good and the defrost thermostat was visually deformed and tested open at freezing and 40 degrees
Was this helpful?
Thank you for voting!
Fan making noise.
1 person
found this instruction helpful.
-
Matthew from Escondido, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Remove ice maker and all of it's accessories in order to remove the panel covering the fan. Don't drop the screws!
Unscrew the lower fan bracket. You will see the lower red rubber grommet. Hold fan motor with one hand and push the fan off the shaft and into the compartment above. Then remove the round retainer thing below it by holdi ... Read more ng it and pulling down on the motor assembly. Install new grommet on upper part. and put it all together.
REMEMBER where the fan is on the shaft. It has about one inch of shaft placement. I put mine so that most of it was above the hole that the fan goes into and about 20 percent showing below the sheet metal.
Also check to see if your fan is damaged. Mine was not.
This refrigerator has been awesome! I have had many issues but have been able to fix all of them for the last 15 years!
Unscrew the lower fan bracket. You will see the lower red rubber grommet. Hold fan motor with one hand and push the fan off the shaft and into the compartment above. Then remove the round retainer thing below it by holdi ... Read more ng it and pulling down on the motor assembly. Install new grommet on upper part. and put it all together.
REMEMBER where the fan is on the shaft. It has about one inch of shaft placement. I put mine so that most of it was above the hole that the fan goes into and about 20 percent showing below the sheet metal.
Also check to see if your fan is damaged. Mine was not.
This refrigerator has been awesome! I have had many issues but have been able to fix all of them for the last 15 years!
Read less
Was this helpful?
Thank you for voting!
Had a 'ticking' sound
1 person
found this instruction helpful.
-
John from PARKVILLE, MO
- Easy
- 30 - 60 mins
-
Socket set
Separately (from a different site) purchased new compressor fan and motor. I purchased the grommets here because the other site listed the grommets as temporarily out of stock. I did watch one of the videos on PartSelect about the grommet replacement. Repair was pretty simple, biggest challenge was getting to the screw on the far side o
... Read more
f the motor. Removed the two screws holding the fan motor into place. Removed motor and blade. Reinstalled with new fan blade, new grommet and new motor.
Read less
Was this helpful?
Thank you for voting!