3641 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
no shelf in my freezer
7 of 11 people
found this instruction helpful.
-
Barbara from Brookfield, IL
- Really Easy
- Less than 15 mins
first I ordered parts that didn't work. the return process was painless and I found the part I needed, which just popped right in!
Was this helpful?
Thank you for voting!
light not working
7 of 11 people
found this instruction helpful.
-
robert from FRANKLIN SQ, NY
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
I used pliers to pull lightly on the head of the switch, while I inserted a small flat head screw driver into the base of switch and gently worked around the edges to free it from the panel.
Was this helpful?
Thank you for voting!
Refrigerator to warm
5 of 5 people
found this instruction helpful.
-
Lloyd from PITTSBURG, CA
- Easy
- 15 - 30 mins
-
Screw drivers
Instructions say run capacitor is by motor, but on this frige its in the refrigerator compartment. The capacitors looks different, one square and the other long
Was this helpful?
Thank you for voting!
NOISY
5 of 5 people
found this instruction helpful.
-
Paul from NANTUCKET, MA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
I FOLLOWED YOUR VIDEO............WAS EASY. THANKS
Other Parts Used:
Was this helpful?
Thank you for voting!
Loud screeching noise from freezer during cooling cycle
5 of 5 people
found this instruction helpful.
-
Gabriel from WASHINGTON, DC
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set
I replaced the fan motor and one of the grommets. When I took the motor out it was clear it was failing because there were metal flakes from the motor on the fan blade. I followed the instructions on the posted video. My model did not have a removable bottom tray in the freezer so that was one less thing to do. Aside from that the vide
... Read more
o was accurate. I had two minor problems during reinstallation. First, it was very difficult to get the spring clamp back on the fan blade without pushing it against the motor. Recommend you get someone to help hold the spring open while you push it on. Second, the length of wire on the replacement was not exactly the same as the original and I had to move some wires around. Recommend you take a picture of the cable layout before disassembling.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Noisy freezer fan
6 of 9 people
found this instruction helpful.
-
Robert from PITTSBURGH, PA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Fast and easy-great video instructions for each part ordered.
All parts perfect fit.
My refrigerator is running like new again-good for another 10 years!
All parts perfect fit.
My refrigerator is running like new again-good for another 10 years!
Other Parts Used:
Was this helpful?
Thank you for voting!
refrigerator evaporator fan noise
6 of 9 people
found this instruction helpful.
-
Alan from Sunapee, NH
- Easy
- 15 - 30 mins
-
Screw drivers
Despite attempts to quiet the 2 year old fan, I went ahead and replaced it. Part Select was prompt with a new one at my door less than 24 hours. It was just the fan motor, so took a couple extra steps to place it in the metal housing, but no problems and though the frig still makes noises, it's not coming from the fan as before.
Was this helpful?
Thank you for voting!
the plastic vegitable bin cracked
5 of 6 people
found this instruction helpful.
-
Catherine from Clinton Twp., MI
- Really Easy
- Less than 15 mins
even my three year old grandson could do this one! open the door slide the old tray all the way out and slide the new one in. wha-la! Actually I was very impressed at the ordering process since I could actually see a picture of the bin in its actual use not just some obscure number with a vague discription. I'm a visual person so this
... Read more
made it extremely easy to see what I was ordering. No guess work.
Read less
Was this helpful?
Thank you for voting!
Frig too warm
5 of 6 people
found this instruction helpful.
-
Judith from Port Mansfield, TX
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Followed the instructions on the repair video and it made very easy. Also saved us a lot of money. Thanks for your help.
Was this helpful?
Thank you for voting!
A rat had chewed half of all four blades off
9 of 18 people
found this instruction helpful.
-
Curtis from Dothan, AL
- Really Easy
- Less than 15 mins
-
Nutdriver
First I removed the left condensor fan motor bracket nut, loosened the right motor bracket, dropped the moter bracket down freeing the motor from the rubber grommets.
Pulled the fan off from the motor shaft, pressed the new fan on the shaft and installed new grommets. Replaced the motor bracket and tightened the right bracket nut an ... Read more d checked fan for clearance and free spin. Reinstaled the left bracket nut. Turned on the refrigerator and checked fan for action. Everything worked great.
I did not know the fan replacement came with a compression ring already installed, so now I have an extra compression ring.
Pulled the fan off from the motor shaft, pressed the new fan on the shaft and installed new grommets. Replaced the motor bracket and tightened the right bracket nut an ... Read more d checked fan for clearance and free spin. Reinstaled the left bracket nut. Turned on the refrigerator and checked fan for action. Everything worked great.
I did not know the fan replacement came with a compression ring already installed, so now I have an extra compression ring.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
EVAP fan motor wore out, fan hits flange in back panel
5 of 7 people
found this instruction helpful.
-
James from Okeechobee, FL
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
Took back out of freezer compartment, pulled plug and removed old motor, inserted new parts. It was
easy and the parts arrived the day after I ordered
online, even though I chose the cheapest shipping
option. Nothing in my freezer had a chance to thaw
out.
easy and the parts arrived the day after I ordered
online, even though I chose the cheapest shipping
option. Nothing in my freezer had a chance to thaw
out.
Other Parts Used:
Was this helpful?
Thank you for voting!
missing a shelf
6 of 10 people
found this instruction helpful.
-
Joseph from Rome, NY
- Really Easy
- Less than 15 mins
My repair was simple. Just put the shelf in the holes in the freezer. The AMAZING thing was how quickly I recieved the part after placing my order. I placed the order at about 3:30 pm on a friday checked the box for ground shipping and the part was at my door the next morning. I think that was a mistake, but I was impressed.
Was this helpful?
Thank you for voting!
Freezer door gasket was not sealing
4 of 4 people
found this instruction helpful.
-
Reginald from VERO BEACH, FL
- Really Easy
- Less than 15 mins
Went on YouTube and it had excellent instructions for removal and installation
Was this helpful?
Thank you for voting!
freezer cold but refrigerator warm, would not cycle the defrost on freezer
4 of 4 people
found this instruction helpful.
-
MATT from OAKLAND, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
two screws and a connector were removed to replace the timer.
Timer was located on the top front of fridge
Timer was located on the top front of fridge
Was this helpful?
Thank you for voting!
The refrigerator would not stop running, resulting in frozen food in the refrigerator compartment.
4 of 4 people
found this instruction helpful.
-
George from W MELBOURNE, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
After reading the trouble shooting section of the owners manual, I determined, without much difficulty, that the temp control was defective. I checked some local outlets and found the prices running from $36.00 and up. The same part from this site was around $20.00. Guess where I bought mine! It arrived in a timely fashion, and I inst
... Read more
alled it with no problem, in about 10 - 15 minutes. This was a very easy job, just remove and replace three wires snap the unit into place, and screw the cover on. Tip: I always use you tube or another source to get some instruction, just in case I'm not as smart as I think I am!
Read less
Was this helpful?
Thank you for voting!