35HG Magic Chef Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
To Old Needed To Be Replace
-
ROSARIO from MESQUITE, TX
- Really Easy
- Less than 15 mins
Actualy I just removed the old ones and replace them with the new ones . And thank you for your prompt delivery I found some one I can trust . Thanks again . Mrs bolanos
Other Parts Used:
Was this helpful?
Thank you for voting!
rusty pans
-
Stewart from Hanover, PA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
simply remove the old and install the new; perfit fit
Other Parts Used:
Was this helpful?
Thank you for voting!
I needed to replace my burner pans.
-
Robert from Wilton, CA
- Really Easy
- Less than 15 mins
The Drip Pans are a cinch to replace with no tools necessary. The best part is that the Web Site is extremely easy to use, and the parts arrived two days after being ordered.
Other Parts Used:
Was this helpful?
Thank you for voting!
Somehow one of our oven racks was missing - maybe taken inadvertently from beside old refrigerator when it was removed.
-
Judy from Framingham, MA
- Really Easy
- Less than 15 mins
We just installed the new rack in the oven. The amazing thing (after many unsuccessful attempts to find the correct rack) was having a friend recommend partselect.com. The gentleman I spoke to was extremely knowledgeable, helpful and efficient. We had our new rack 2 days after placing the order. We thought that kind of service didn't
... Read more
exist any more! Thank you so much. Now we can make 2 pizzas at the same time!!!
Read less
Was this helpful?
Thank you for voting!
replace the cook stove's drip bowls instead of cleaning them
-
Dallas from Arlington, TX
- Really Easy
- Less than 15 mins
I removed the burners and then the older drip bowls of the cook stove--and then I put on the new drip bowls and put back on the burners. My mechanical skills were sufficient for the replacement of the drip bowls.
Other Parts Used:
Was this helpful?
Thank you for voting!
When The Burner Started To Heat (Front) And Then Put The Rice Bag On The Burner. Then The Plastic Bag Began To Burn And The Bag Of Rice Began To Pour Over The Burner. Someone Tried To Clean Up On The Burner But The Burner With Plastic And Hard To Clean The Plastic Off From The Burner.
-
Robert J from Indianapolis, IN
- Really Easy
- Less than 15 mins
Just pull the old out from the stove and put new one on the stove and then tested the burner that is working fine. Thank you very much for order the part. Have a great day.
Was this helpful?
Thank you for voting!
Oven light Switch
-
William from APACHE JUNCTION, AZ
- Really Easy
- Less than 15 mins
-
Pliers
Compressed the springs and removed the damaged switch, then changed the wiring over to the new switch and press into place, worked fine.
Was this helpful?
Thank you for voting!
I needed to replace to two 8* drip bowls on the kitchen range
-
Dallas from Arlington, TX
- Really Easy
- Less than 15 mins
(a) I took out (and threw away) two stained 8* chrome drip bowls on my kitchen range; (b) ti put in two new 8" chrome drip bowls on my kitchen range. I'm pleased that I was equal to the task.
Was this helpful?
Thank you for voting!
Stove needed new bowls
-
Karen from Kettering, OH
- Really Easy
- Less than 15 mins
Just dropped in
Other Parts Used:
Was this helpful?
Thank you for voting!
Old dirty drip pans
-
gizella from mays landing, NJ
- Really Easy
- Less than 15 mins
Removed heating element, installed new drip pan, replaced heating element. Was amazed at fast delivery - ordered in afternoon, arrived fed ex next morning!
Was this helpful?
Thank you for voting!
Burner no longer connected with electric power source
-
Barbara from Pacific Palisades, CA
- Really Easy
- Less than 15 mins
I had determined that the the burner itself was no longer capable of connecting because when I removed another burner and inserted it, it worked just fine. Also, the defective burner had not worked when inserted into another outlet. I was delighted to be able to purchase a replacement so quickly and easily on my own, without having to cal
... Read more
l a repair person or seek a retail outlet.
Read less
Was this helpful?
Thank you for voting!
drip pan were burnt out
-
Delroy from Miramar, FL
- Really Easy
- Less than 15 mins
simply remove the burner take out the drip pan and bowl individually. Install the new one and replace the burner. no tool was used.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip bowls were all rusted.
-
Robin from Seneca, SC
- Really Easy
- Less than 15 mins
Removed old rusted drip bowls and put in the new ones. Very easy to do and needed no tools. It made my 25 plus Jenn Air look new again!
Other Parts Used:
Was this helpful?
Thank you for voting!
Cooking elements had come apart and pans did not sit evenly on the burners. Only two of my four burners were usable.
-
Judith L. from Enterprise, AL
- Really Easy
- Less than 15 mins
Replaced the old elements with new ones. So easy and can now cook four things at the same time and none are tipping over!!!!
Other Parts Used:
Was this helpful?
Thank you for voting!
old drip bowl was worn out
-
Richard from Germantown, MD
- Really Easy
- Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!