EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

35HA Magic Chef Range - Instructions

All Instructions for the 35HA
106 - 120 of 159

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The original bake element burned out
  • William from Florissant, MO
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
1. Removed racks 2. Removed two screws holding in the bake element. 3. Gently pulled out the element exposing the two wires connected to it. 4. The two wires were held by a clip connection. 5. Removed the wire clips holding the wires. 6. Attached the clips to the new element and re-installed the element. New problem: The eleme nt did not heat up. A repairman informed me that the selector switch was damaged during the burnout- that switch was no longer manufactured and was discontinued. Whirlpool company was checked and indicated that there was a new part # 7403P023-60 but that was discontinued too. I was able to get the element working by moving the selector switch to the "Bake" position and then moving the switch about 1/4" in the clockwise direction. The element heated and the oven works at least for now as I search for a replacement part. PartSelect was an invaluable aid and helpful all along the process.
Was this helpful?
Thank you for voting!
Burner was in full hot.
  • Dennis from Oak Lawn, IL
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Turned off the power. Pull the range away from the wall and removed the eight screws holding the cover in place. Carefully pulled the wires off the old switch. Removed the old switch and replaced it with the new. Put all the wires on and replaced the back cover and was done. Burner works fine. This part replaces a lot of different number switches.
Was this helpful?
Thank you for voting!
Drip bowls tarnished.
  • Jennifer from Albion, NE
  • Really Easy
  • 15 - 30 mins
Remove heating element coils. & old drip pans. Install the new drip pans and reinsert the heating elements and insure all elements were level. For aesthetic reasons I replaced all the drip pans - 2 x 8" & 2 x 6".
Was this helpful?
Thank you for voting!
Broil element burned out
  • Wallace from Lowell,, AR
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed the oven door, removed old burned element, installed new element. Turned CB back on and tested oven. Reinstalled oven door. Straight forward and easy to follow directions with new element.Local appliance part house said the element was no longer available. Thanks to you I did not need a new oven. Very easy replacement job with nor mal tools.Thanks
Was this helpful?
Thank you for voting!
Hotplate not working
  • Anthony from Louisville, KY
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed two screws holding cooktop to oven. Unlike the video, the cooktop was not detachable as the wires were hard-wired to the range, so I had to prop the top up with a 6" block of wood and was working upside down. I replaced the element and everything worked just fine.
Was this helpful?
Thank you for voting!
Light bulb failure
  • Grant from Alexandria, VA
  • Really Easy
  • Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!
Oven would not heat up properly to set temperature
  • Max from Bothell, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The element appeared to have been damaged. I replaced the element with ease. However, I still have the same problem. The oven does not heat up to the set temperature. Information from the part select website is that it is more likely the long oven sensor. I ordered one and will provide the results after I have this sensor replaced wi th a new one.
Was this helpful?
Thank you for voting!
part of original burner not working
  • SUSAN K from SEDALIA, MO
  • Really Easy
  • Less than 15 mins
slide new burner in slot and turned on stove. Worked perfectly.
Was this helpful?
Thank you for voting!
Burners quit working
  • Brenda from Brazoria, TX
  • Really Easy
  • Less than 15 mins
Bought two new replacement burners,they work great!
Was this helpful?
Thank you for voting!
replacement of heating element for elec. stove
  • Erica from Ivyland borough, PA
  • Really Easy
  • Less than 15 mins
plugged it in to the spot where missing element was.
Was this helpful?
Thank you for voting!
Elements did not fit properly.
  • myrna from homestead, FL
  • Really Easy
  • Less than 15 mins
Ordered the parts, installed.
Was this helpful?
Thank you for voting!
Somehow one of our oven racks was missing - maybe taken inadvertently from beside old refrigerator when it was removed.
  • Judy from Framingham, MA
  • Really Easy
  • Less than 15 mins
We just installed the new rack in the oven. The amazing thing (after many unsuccessful attempts to find the correct rack) was having a friend recommend partselect.com. The gentleman I spoke to was extremely knowledgeable, helpful and efficient. We had our new rack 2 days after placing the order. We thought that kind of service didn't exist any more! Thank you so much. Now we can make 2 pizzas at the same time!!!
Was this helpful?
Thank you for voting!
replace the cook stove's drip bowls instead of cleaning them
  • Dallas from Arlington, TX
  • Really Easy
  • Less than 15 mins
I removed the burners and then the older drip bowls of the cook stove--and then I put on the new drip bowls and put back on the burners. My mechanical skills were sufficient for the replacement of the drip bowls.
Was this helpful?
Thank you for voting!
The front left side burner was broken.
  • Yelena from San Francisco, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
We lifted the glass top, uninstalled the old burner and installed the new burner in it's place. It worked right away - and is still working. No other tricks the new burner was a perfect fit.
Was this helpful?
Thank you for voting!
I needed to replace to two 8* drip bowls on the kitchen range
  • Dallas from Arlington, TX
  • Really Easy
  • Less than 15 mins
(a) I took out (and threw away) two stained 8* chrome drip bowls on my kitchen range; (b) ti put in two new 8" chrome drip bowls on my kitchen range. I'm pleased that I was equal to the task.
Was this helpful?
Thank you for voting!
All Instructions for the 35HA
106 - 120 of 159