3524SRW Magic Chef Range - Instructions

Turn power off, lifted door of swing hinge, remove convection fan plate screws, remove screws on element bracket, remove from recess far enough to unplug connectors, reverse order to assemble.

I am really impressed with partselect.com. I ordered the part on a Saturday evening after my oven quit. By Monday evening I had an email showing it shipped and received it on Wednesday. The fit was perfect and the fix was quick.

First I removed the two screws at the back of the oven that hold the element in place (a flashlight is useful for this). I then pulled the element out about 3 inches and disconnected the wire connectors. Connect up the new element and replace the two screws. Dead simple and quick to do and saved us buying a new stove!!!

Two screws out, the old bake element came out easily, was able to disconnect very easily from the clip wiring, then replaced with new. I even was able to replace the oven light bulb at the same time. A real cinch.

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, at that point I attempted to reconnect the two wires, that is when I found out why they tell you to unplug the electricity. It wasn't a big shock, more of a consistant shock. Once I unpluged the sto ... Read more ve from the wall, it only took about 3 minutes or so to connect the wires and replace the two screws. I have no doubt I saved a hundred dollars doing this myself.
Thank you for your prompt delivery on the replacement part for my Bake Element at what I felt was a very reasonable price.

A little background story: One day after cooking up some chicken I noticed a bright blue light coming from the bake element. I turned off the oven, but the blue light remained and was getting brighter. Come to find out the bake element had more or less welded itself in half and what I saw was electricity arcing between the two halves of t ... Read more he baking element. I had to unplug the range to stop the arc. Luckily fixing it was as easy as unscrewing the old one (held in with one philips screw on each side), popping the connected wires off (they just slide on and off of connecting tabs), and doing the reverse for installation. Super easy job.

. First I removed the two screws that hold the ace. I thenelement in place. I then pulled the element out about inches and disconnected the two wires...)

I unplugged the oven, sat the flash light in the oven and removed the two screws that hold the element in place. I pulled the element out and diconnected the two metal wire clasps from the element. Connected the new element, made sure the clasps were secured. Slid the wires back in and replaced the screws. Tested the oven, it heats u ... Read more p to correct temperature. I am a women and it was real easy thanks to the other repair stories I read.

The previous repair stories were extremely helpful! The most difficult part was unhooking the old element and I assume some of that was contributed by it's age. Installing was a piece of cake!

We repalced the heating element n no time. Easy to do and the price couldn't be beat!

I watched the video provided by Part Select before I ordered the part. I removed the old element by taking out two screws and unplugging it from the wires. I put the new element in place, connected the wire to the right side and then opened up the back of the range to connect the left side. The repair was easy, but the video did not sh ... Read more ow that you had to connect the left side from the rear of the appliance. It was easy to figure out. The appliance works like a charm...no like an oven.

It was very easy to fix

I figured there couldn't be much else but the element that was bad, so I searched for "Magic Chef stove parts" on Google and found your site. Your site described the location for the model number of my stove, and also gave troubleshooting tips. I verified the element was bad with an ohmmeter and ordered the part from you guys. It arrived ... Read more early, and installed with 2 screws and 2 push-on terminals. Stove works great now! I'm a web programmer and I think your website is very intuitive and useful. The information like model numbers, troubleshooting, parts measurements and extensive parts pictures is perfect for your customers. I found the correct diagnosis and part quickly, and ordered without a problem. Thanks - and keep up the good work! Mike

Very easy, clip on connections and two screws to hold it in place.