345R - Parts

This is an original replacement part manufactured for use with trimmers. The start/stop switch is also called the kill switch, and fits on the upper handle above the throttle. The red switch is used to shut of the engine, and has to be engaged to run the engine. The switch is sold individually.

This is a genuine OEM part. The retaining ring is made for use with many chainsaws, and is used to help secure clutch drum components. The hardened metal component is sold individually. A hex key, screwdriver and pair of pliers are often required for the repair.

It is an identical replacement for a missing or damaged impeller pulley which was originally installed on the new unit. Please refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this durable impeller pulley is made of durable metal and is sold individually.

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.

This is a genuine Husqvarna and Jonsered replacement part that has been sourced from the original manufacturer to be used with chainsaws, brushcutters, stump grinders, pruning saws, and power cutters. The sealing ring is used to provide spacing and to prevent oil leaks between the drive shaft and the cover panel. This item is sold as an individual replacement part.

This retainer spring, also known as a retainer clip, is an authentic manufacturer replacement part for a variety of lawn and outdoor power equipment. It is responsible for securing the equipment parts and preventing them from dislodging or becoming loose during operation. If the retainer spring is rusted, unable to maintain tension, or is...Read more improperly installed, it will cause the equipment parts to become unstable, and noisy, and lead to eventual equipment failure. Carefully remove the spring from its position by releasing the tension on it. Place the new spring in position, and if needed, reapply tension to the spring to ensure it is securely attached to the component parts.

This is an original replacement part manufactured for use with snowblowers. The special handle knob is used to secure the handles and to adjust the position of the handles. This handle knob is available as an individual replacement part, please note two are required.

This is a genuine OEM approved replacement screw made for Husqvarna chainsaws and brush cutters. It is a standard hardware which has multiple uses based on your equipment. Please refer to diagrams for correct application. It is made out of metal and it is sold individually. You would need a torx screwdriver to install or remove this screw.

This OEM locking pin is found in your handheld lawn equipment to hold a part, such as a cutting head, spool, or guard, in place and keep it from coming in loose while you are using your machine. If the pin is broken, the component it is supposed to be securing will become wobbly and loose, which can cause your machine to malfunction. To r...Read moreemove a broken locking pin, you can use pliers or a small screwdriver to pull it straight out of the hole. If the pin is stuck, you may need to wiggle it back and forth gently while pulling on it. Take into consideration that this part is sold individually, so refer to your instruction manual to confirm how many of these pins your machine will need.

This is a standard round head bolt which is used in multiple locations on a variety of lawn and garden equipment. It is sourced from original equipment manufacturer. This bolt is designed to stay in place while the lock nut is secured. Please note it is sold individually. Check diagrams for proper location and application of this bolt. Size: 5/16-18 X 3/4.

The handle attaches to the clamping sleeve and is made of plastic. This is a genuine Husqvarna and Jonsered replacement part for use in trimmers, saws, and brushcutters. This item is available as an individual replacement part. During replacement, it may require a wrench to help install this part correctly. Over time this part may break and will need to be replaced.