EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

32-01 - Instructions

All Instructions for the 32-01
106 - 120 of 234

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven was slow on lite up
0 of 1 people found this instruction helpful.
  • BILLY from DUCKHILL, MS
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
removed bottom plate in oven removed three screws and cut two wires.
Was this helpful?
Thank you for voting!
oven would not light
0 of 1 people found this instruction helpful.
  • wayne from Washington, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
took off bottom pan in oven and replaced ignitor
Was this helpful?
Thank you for voting!
wouldn't light.
0 of 1 people found this instruction helpful.
  • brett from newbury pk, CA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
First, I read all the instrutions that came with my replacement part from Parts Select thoroughly (twice) then follewed them like an experienced surgeon. I removed the lower drawr after turning off the gas and unplugging the stove and then took out the bottom panels inside the oven to expose the screws holding the ignitor coil. Removed it , then cnnected the new one to the existing wires as they were in the stove and the drawing in the instructions, then replaced everything in the reverse of them coming apart. Plugged it back in, turned the gas back on and now it,ll bake things again. YEAH!! Parts Select!!!
Was this helpful?
Thank you for voting!
The oven wouldn't light or very slow to light
1 of 4 people found this instruction helpful.
  • Chris from Shunk, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the two screws, took out the old one and replaced the new one. It was very easy and the oven works great now. Thanks.
Was this helpful?
Thank you for voting!
oven would not ignight
0 of 1 people found this instruction helpful.
  • joseph from broadview heights, OH
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
followed posted repair procedure on Parts select site. . . straight forward and simple. . .
Was this helpful?
Thank you for voting!
Oven wouldn't get hot..smell of gas
0 of 1 people found this instruction helpful.
  • Eric from Chicago, IL
  • Easy
  • 15 - 30 mins
  • Wrench (Adjustable)
Replaced the flat style oven igniter. Turn off gas and unplug oven. Removed the broiler drawer, cut wires, unscrewed oven igniter (using a small/medium adjustable wrench), connected wires, fastened new igniter to bracket, spliced wire, twisted together, plugged oven back in, turned gas on, turned on oven after a few minutes...worked gre at.
Was this helpful?
Thank you for voting!
Oven would not heat up
0 of 1 people found this instruction helpful.
  • Steve from Canton, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Checked voltage supply to oven igniter, had 120 v
to oven igniter, but igniter was not glowing.
Was this helpful?
Thank you for voting!
bad oven ignitor
0 of 1 people found this instruction helpful.
  • Janice from Mountain Home, AR
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
A friend replaced the new ignitor with the old one...very simple job.

I would like to comment on how fast the service was from when I ordered the part online to 3 business days later when the part arrived....very happy about how easy it was to order part and that the part was in stock and delivered so quickly. Thank you very m uch !! I will recommend Part Select to a friend that frequently orders parts.
Was this helpful?
Thank you for voting!
oven taking long time to start and shutting down while baking
0 of 1 people found this instruction helpful.
  • Merle from Monticello, IN
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
The oven igniter was working, the Sears repairman said by the phone the igniter was probley weak and not geting hot enough. Remove door ( 4 screws) Remove oven pan (4 Screws) remove burner sheld. remove lighter and cut wires. Install new. Remove storage drawer and splice new wires to the old at the back.
Was this helpful?
Thank you for voting!
oven took a long time to preheat
0 of 1 people found this instruction helpful.
  • Brad from Medina, NY
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
took drawer out, removed tin covers, found igniter and removed,snipped off parts to put on new igniter ,wirenutted old to new put back together ,we had ignition! all in all pretty easy job! detailed instructions that came with new part were easy to follow and precice
Was this helpful?
Thank you for voting!
Oven would not ignite to heat to baking temperature
0 of 1 people found this instruction helpful.
  • Louise from Delaware, OH
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
pulled stove out to unplug the electric cord. Took oven door off and removed the bottom panel (2 screws) and then removed the burner (2 screws). took off old igniter ( 2 nut screws). cut wires and stripped the coating to wire to new unit.
Attached new igniter to the burner, and put the burner back in place and replaced the screws so unit was stable.
Turned oven on to make sure ingiter was going to light oven, when oven came on, turned oven off and replaced the cover to the burner and the bottom panel in the oven,. Put the oven door back on........
Probably took 45 minutes.
I ordered the part late Friday afternoon, around 3, and the part was here Saturday Afternoon. I was impressed.
Was this helpful?
Thank you for voting!
The oven igniter no longer worked
0 of 1 people found this instruction helpful.
  • Ralph from East Brunswick, NJ
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers
Let me begin to say your service was great. I received the unit the next day. Also your price was good.
The whole job took me an hour. I would have done it sooner but I didnt a square head driver bit to remove the igniter from the burner assembly. I removed the whole assembly and with a pliers slowly unscrewed the mounting screws. Af ter that I disconnected the igniter per your instructions,spliced the remaining wires reconnected the gas and electric and I was good to go.
Was this helpful?
Thank you for voting!
Oven Burner Would Not Ignite. Heard the controls click to start oven but no fire.
0 of 1 people found this instruction helpful.
  • Mark from Rockford, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Unplug appliance. Remove the bottom of the oven (2 screws in back of oven bottom), remove burner cover (2 screws in front and nut in center holding burner). Pull out the bottom storage drawer under the oven and unplug both wires from oven Igniter which are located in the back. One wire plugs into the gas valve and the second wire went into a connector that was on the lower left. I removed the screw on the back oven wall that held the burner so I could remove the burner for ease of work. Remove two screws holding the old igniter. The two screws holding the igniter to the side of the burner were stripped and they took a little time to remove but I replaced them with two new screws I had in my misc. screw drawer and had no issue. Cut the top wire and splice it onto the top wire of the new igniter using the porcelain wire nuts provided. Do the same with the bottom wire. Re-assemble and plug back in. Everything worked perfectly.
Was this helpful?
Thank you for voting!
Oven not igniting
0 of 1 people found this instruction helpful.
  • Kirk from Saint Paul, MN
  • Easy
  • 15 - 30 mins
  • Wrench set
Unplug electric , remove old igniter, cut wires, shorten new igniter wires, strip insulation, wire nut together, attach new igniter, plug in electric, fire it up. Worked great.
Was this helpful?
Thank you for voting!
The oven igniter would glow but the oven wouldn`t lite
0 of 1 people found this instruction helpful.
  • James from Circleville, OH
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
After finding your page and using your trouble shooting guide, it was easy getting the right part and the video helped a lot. Removed the over rack- removed two screws to remove the bottom- two screws to remove the burner. Clipped the two wires to the old igniter and removed the burner from the oven,removed the two screws holding the igni ter and installed new one. clipped the wires to length and renistalled the burner. Using the two wire nuts supplied put the wires togather and reinstalled the bottom. Everything went well lite first try with no poof sound. Just in time for Thanksgiving cooking. Got fast delivery of parts. Will uas again. Thanks Partselect.
Was this helpful?
Thank you for voting!
All Instructions for the 32-01
106 - 120 of 234