EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3119 - Instructions

All Instructions for the 3119
121 - 135 of 208

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken shelf support on the refrigator door
0 of 2 people found this instruction helpful.
  • Matthew from Philaelphia, PA
  • Really Easy
  • Less than 15 mins
I matched the part I needed throught your web site. Then I called and spoke to a customer support person, and gave my personal information to her. I do not like giving my credit card numbers over the internet. Your site allows me to do that.
Was this helpful?
Thank you for voting!
Ice maker wasn't working
1 of 5 people found this instruction helpful.
  • Sherry from Heber Springs, AR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched video on website then removed old ice maker. New one went in without any problems. Working great. I am a 60 year old woman and had never done anything like this but so easy. Husband scared now, doesn't know what project I will take on next.
Was this helpful?
Thank you for voting!
does not fill ice maker this was not original problem
2 of 10 people found this instruction helpful.
  • Salvatore from New City, NY
  • Very Difficult
  • More than 2 hours
  • Screw drivers
install icemaker water was allways delivered to previous unit water is not being delivered to icemaker still having difficulty
Was this helpful?
Thank you for voting!
Unit Changed Out Without Any Difficulty
0 of 6 people found this instruction helpful.
  • Gary from Ruidoso, NM
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I disconnected the ice maker by backing out the two mounting screws and lifted the ice maker out of the freezer after unplugging the unit. The new unit was placed with a plug-in adapter and mounted on the original mounting screws. The intake water adapter was snapped into place and ice was available in approximately 2-3 hours.
Was this helpful?
Thank you for voting!
Ice maker not working
  • Derek from Baton Rouge, LA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
Went well. Changed the Ice Maker and then the Water Valve. All good and it is making ice.
Was this helpful?
Thank you for voting!
Icemaker leaking water
  • Allen from Santa Fe, NM
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
I had to defrost the freezer to free the icemaker. After that the installation was plug and play with two small exceptions: 1) I had to file down the width of the left hand tine of the old stripper so that it would fit the new icemaker, and 2) the motor housing of the new icemaker was slightly wider than the old one. It fit, but just ba rely. But I'm back in the ice again, no dripping water, all is good.
Was this helpful?
Thank you for voting!
Broken ice maker replacement
  • Matthew J from White Plains, NY
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Wrench (Adjustable), Wrench set
Installing the actual ice maker was quite easy. What takes most of the time is preparing the freezer for the install. Need to remove all shelving, (and the door) to gain access to the unit. The ice maker is simple to install once access is achieved. Putting everything back together takes some time.
Was this helpful?
Thank you for voting!
would not make ice
  • jeffrey from clinton, TN
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
i watched the free video and then made the switch my ice screw had 4 bolts instead of three that was the only difference used the screw driver to loosen the straps on the connection plug and that was it easy as pie in about 30 minutes i heard it drop a load of ice it beats filling ice trays all the time thank you partselect for the free v ideo it was the difference in my sucess
Was this helpful?
Thank you for voting!
no ice
  • Richard from Las Cruces, NM
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Followed the video, very simple
Was this helpful?
Thank you for voting!
Was not making ice
  • Colleen from Yorba linda, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took old part out , put new part in. Was so easy thought we did it wrong. Ice maker working great, have lots of ice now. Thank you. Colleen
Was this helpful?
Thank you for voting!
Ice maker quit makeing ice
  • Dickei from Sugar Land, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Wathched the video and it was done in less than 15 min making ice again no problem
Was this helpful?
Thank you for voting!
Cord
  • Laurie from Portland, ME
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The adapter made the cord a bit long but other than that it was great!!!
Was this helpful?
Thank you for voting!
Ice Maker stopped making ice.
  • Charles from Edmond, OK
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
Ice maker was side mount instead of rear mount as shown in previous insructions. Removed one screw and slide ice maker forward. used flat head screw driver to undo the ice maker plug. The ice maker came right out. Removed old ice maker fill cup and put it on the new ice maker. Slide the new ice maker into place and used the same screw to secure it. Pluged it in and turned on the ice maker. Had new ice in a couple of hours. It comes with a round plug to square plug adapter, new fill cup and fill tube, all of which I didn't use.
Was this helpful?
Thank you for voting!
Was not making ice cubes
  • Bob from JASPER, GA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Only needed to remove one screw, slide unit out and disconnect the power cord. Theb reverse the above operation to install the replace ice maker unit. Quick and extremely easy....
Was this helpful?
Thank you for voting!
No problems.
  • Patricia from Norwood, NC
  • Easy
  • Less than 15 mins
  • Nutdriver
Took out the old, replaced with the new. Needed second person to hold the flash light. That is the secret to get it plugged in and secured.
Was this helpful?
Thank you for voting!
All Instructions for the 3119
121 - 135 of 208