3119 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice Maker Leaked Water
1 of 3 people
found this instruction helpful.
-
Lynn from Elkton, MD
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed Ice Maker (2-Bolts)
Removed Ice Tray Screw Motor (to get to Ice Maker Plug- 4 small screws)
Installed new Ice Maker and reinstalled Ice Maker Screw Motor
Extreamly easy
Removed Ice Tray Screw Motor (to get to Ice Maker Plug- 4 small screws)
Installed new Ice Maker and reinstalled Ice Maker Screw Motor
Extreamly easy
Was this helpful?
Thank you for voting!
No ice in hopper
3 of 9 people
found this instruction helpful.
-
Steve from Tulare, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver
Ice hopper had no ice in it. But water in door worked and if I added ice to hopper, it would dispense in door. I added water to ice maker but no ice was made. Replaced ice maker and all it required was to unplug harness and remove two screws with nut driver. Easy!
Was this helpful?
Thank you for voting!
ICE MAKER gave out after 20 years
2 of 6 people
found this instruction helpful.
-
Robert from new city, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
TURN WATER OFF TO REFRIDGE. TURN OFF ELECTRICITY.
Remove old ice maker (AFTER REMOVING THE BIG ICE TRAY) by disengaging two philips head screws but don't totally unscrew them. You must then totaly unscrew the bottom screw below the top two screws. Unplug the 5 head connection. (electricity)
Use adapter for t ... Read more he electrcity, etc from the box, (five head connection) Use the old plastic hose to hit the new cup. TIGHTEN TOP SREWS. LEVEL BY EYE. Turn the system on. Prime with some fresh water.
PS make sure that the light is on (green) and you will be in ice city. Be careful not to disengage the elcectic head when replacing the big ice tray.
HAVE A COCKTAIL!
Remove old ice maker (AFTER REMOVING THE BIG ICE TRAY) by disengaging two philips head screws but don't totally unscrew them. You must then totaly unscrew the bottom screw below the top two screws. Unplug the 5 head connection. (electricity)
Use adapter for t ... Read more he electrcity, etc from the box, (five head connection) Use the old plastic hose to hit the new cup. TIGHTEN TOP SREWS. LEVEL BY EYE. Turn the system on. Prime with some fresh water.
PS make sure that the light is on (green) and you will be in ice city. Be careful not to disengage the elcectic head when replacing the big ice tray.
HAVE A COCKTAIL!
Read less
Was this helpful?
Thank you for voting!
ice maker not calling for water to make ice.
1 of 3 people
found this instruction helpful.
-
Sharon from Medway, MA
- Really Easy
- Less than 15 mins
-
Nutdriver
I removed the screws that held the unit in place, and also the screws that held a plate that covered where the unit plugs in. I unplugged the unit, and removed it. Put the new one in, reversing the steps. Turned the new unit on, and had ice in 45 minutes! Summer is coming, I need my ice maker! This is the second unit I have replaced on th
... Read more
is refrigerator, the first one was not releasing the cubes. This second one was a different style than the first, but same install process.
Read less
Was this helpful?
Thank you for voting!
Old Ice quit working, would make ice but wouldn't flip ice.
1 of 3 people
found this instruction helpful.
-
Chris from Ulysses, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed old Ice maker and replaced with new Ice maker.
Was this helpful?
Thank you for voting!
socket had melted
1 of 3 people
found this instruction helpful.
-
Chris from Charlotte, NC
- Really Easy
- Less than 15 mins
pluged the wire harness into the new socket from the back and snaped the socket in place.
Was this helpful?
Thank you for voting!
Instructions did not cover all the parts in kit. The instructions did not cover the elbow in the back of the refg. or the filler tube. I was doing a replacment & it not address that.
2 of 6 people
found this instruction helpful.
-
James from Houston, TX
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
I was doing a replacement so it was just a matter of removing old parts and replacingn them with new ones.
Was this helpful?
Thank you for voting!
The ice maker needed replacing for a couple of years. Then, a couple of weeks ago, the water supply stopped serving both the ice maker, and the drink dispenser.
1 of 3 people
found this instruction helpful.
-
Robert from Mahomet, IL
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
I ordered both a new replacement ice maker, and a new solenoid/pump. They were delivered to my house within one day and I had them installed in a matter of an hour. I had to use the power extension cord supplied with the ice maker.
The new "quick connect" hose couplings on the new pump are great.
The new "quick connect" hose couplings on the new pump are great.
Was this helpful?
Thank you for voting!
We can't seem to get the dripping water stopped when the water fills the ice maker. The large hole in the plastic we covered, but it still drips some. So we may try epoxy. An easy job we thought, but we have this water problem.
2 of 7 people
found this instruction helpful.
-
Barbara from Columbus, OH
- Difficult
- 1- 2 hours
-
Screw drivers
A friend had no problem getting the new ice maker in. But then the problems started. The ice maker works great. But when the water fills the ice maker it squirts water onto the side of the freezer and ice sickles form. So we watched and decided the hole was too large so used a piece of plastic. That helped to cover the hole. But some wate
... Read more
r is still entering the freezer and not all going to the ice maker. The only other thing we can think to try is to use epoxy to try to close that place. A simple job has turned into a big headache. I wish they made the ice maker like the original one.
Read less
Was this helpful?
Thank you for voting!
The retainer latch broke
0 of 1 people
found this instruction helpful.
-
Gary from Clayton, NY
- Really Easy
- Less than 15 mins
Removed the shelf retainer and snapped the new one in. and reinstalled the shelf on the door.
This was a very simple problem!
What really impressed me was that I ordered the part from you before noon on one day and received it by 11 AM the next day!!!
This was a very simple problem!
What really impressed me was that I ordered the part from you before noon on one day and received it by 11 AM the next day!!!
Was this helpful?
Thank you for voting!
door shelf retainer broke off
0 of 1 people
found this instruction helpful.
-
Sheryl from Wyoming, MI
- Really Easy
- Less than 15 mins
First, I removed the broken end cap from refrigerator door. Then I snapped the new end cap into place. Repair took less than 5 minutes and required NO TOOLS! Easy!! Got my part in one day, Thanks.
Was this helpful?
Thank you for voting!
Our icemaker quit working.
0 of 1 people
found this instruction helpful.
-
Robin from Georgetown, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband took the old icemaker out before the new one came in. When the new one arrived, I installed it in less than 10 minutes.
Was this helpful?
Thank you for voting!
Icemaker Wouldn't Totally Work
0 of 1 people
found this instruction helpful.
-
KEVIN from MITCHELL, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Loosened 2 screws unplugged cable. Plugged in cable adapter on new unit. Plugged in to receptical, hung on 2 screws, tightened 2 screws. Done
Was this helpful?
Thank you for voting!
old ice maker quit
0 of 1 people
found this instruction helpful.
-
Ben from Northville, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
removed old ice maker, obtained part number from it. went on line ordered new ice maker at 10:45 in the morning, at 3:00 the nexte after noon new icemaker was in hand. took about 5 minutes to install new ice maker. works perfect. would do business again with this company.
Was this helpful?
Thank you for voting!
Ice maker quit working, I took it apart and found a broken wire at the thermostat, soldered it back, but apparently it got too hot.
0 of 1 people
found this instruction helpful.
-
Mark J. from Alice, TX
- Really Easy
- Less than 15 mins
-
Nutdriver
It took longer to remove the ice bucket and frozen food than it did to replace the ice maker. Remove one screw with a 1/4" nut driver, slide outward and remove plug. transfer water tube to new unit. plug it in, slide into rear slots and install one screw. Replace ice bucket and frozen food, shut the door and hear ice falling in about 30
... Read more
min. Easy job! Great product! THANKS MJS
Read less
Was this helpful?
Thank you for voting!