3119 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The end cap on the door shelf snapped off.
0 of 1 people
found this instruction helpful.
-
Miranda from Waterford, CT
- Really Easy
- Less than 15 mins
I pulled off the broken piece, ordered the new piece, and snapped it on. VERY SIMPLE.
Was this helpful?
Thank you for voting!
Light socket missing in refrigerator
1 of 4 people
found this instruction helpful.
-
Wayne from Issaquah, WA
- Really Easy
- Less than 15 mins
Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.
Was this helpful?
Thank you for voting!
Ice maker would not work.
0 of 1 people
found this instruction helpful.
-
Craig from Hanna City, IL
- Really Easy
- Less than 15 mins
-
Nutdriver
Removed the Ice maker from the freezer because the light was not on. Disassembled ice maker, found printed circuit board had shorted across two posts because the board was black in that area. Bought new ice maker assembly, installed in less than five minutes, making Ice fine.
Was this helpful?
Thank you for voting!
My Icemaker arm was broken. It didnt move up or down by itself.
0 of 1 people
found this instruction helpful.
-
Fred from Brooklyn, NY
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
I removed the ice tub. Removed the screw on the left side that holds closed the section where the icemaker plug is connected. Disconnected the plug. Then removed the bottom right screw. I was then able to remove the Icemaker by unhooking it from the bcak freeze wall. I disconnected the icemaker from the fan gaurd. Removed the icemaker co
... Read more
ver. unscrewed the 3 icemaker screws and opened up the chamber. removed the old Ejector Blade Drive Cam by removing the outer srew that hold the gear to the icemaker. changed the cam with the new one and reassembled everything.
Read less
Was this helpful?
Thank you for voting!
Ice maker stopped working; would not fill
0 of 1 people
found this instruction helpful.
-
William from Darien, CT
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
It was as easy as the instructions were clear (and they were). Remove 2 screws and two nuts, pop out the old ice maker, pop in the new, plug in and tighten screws/bolts. It worked. I'm happy.
Was this helpful?
Thank you for voting!
Take out old ice maker and replace with new
0 of 1 people
found this instruction helpful.
-
Gerald from Bismarck, ND
- Really Easy
- 15 - 30 mins
-
Nutdriver
Used the nutdriver to loosen two screws, life out ice maker, disconnect electric plug and put aside. Placed the new icemaker on the loosened screws, plugged in electric connector and tightened screws. Used small level to verify that unit was level.Waited about two hours for first cubes to be released into tray - has been working fine si
... Read more
nce!
Read less
Was this helpful?
Thank you for voting!
Icemaker stopped cycling and wouldn't make ice
0 of 1 people
found this instruction helpful.
-
Alan from Raleigh, NC
- Really Easy
- 15 - 30 mins
-
Screw drivers
I removed the lower screw (not needed for the new icemaker), loosened the 2 top screws, unplugged the wire harness and removed the old icemaker. Unpacked the new icemaker assembly from the box, wiped the ice cube depressions to remove any debris, snapped on the water tube adapter, hung the new assembly on the 2 loosened upper screws and t
... Read more
ightened the screws. The wire harness required the supplied pigtail plug which made the wire assembly long and awkward to replace the ice bucket/dispenser assembly, plugged it in and was done. It took a total of about 10 minutes for the entire operation and had a full bin of ice cubes within 36 hours and was ready for the ice dispenser/crusher in the freezer door. Easy install!
Read less
Was this helpful?
Thank you for voting!
replaced the ice maker
0 of 1 people
found this instruction helpful.
-
Opie from Carrollton, GA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
I ordered the replacement from you guys, got the new ice maker and the plug had an adapter, but it wouldnt fit in with everything. So I cut the plug off my old ice maker and put it on the new one and it works just fine.
thanks for everthing P.S. i got the ice maker from you for 109.00 and sears wanted 130.00 for it
good stuff g ... Read more ood deal.
thanks for everthing P.S. i got the ice maker from you for 109.00 and sears wanted 130.00 for it
good stuff g ... Read more ood deal.
Read less
Was this helpful?
Thank you for voting!
new part was substitute/which was some what different and was hard to get tray back in because power cord would not let it
0 of 1 people
found this instruction helpful.
-
Dudley from North Little Rock, AR
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers
i did every thing according to instructionwhich was simple but it did not cover how to use the extension electrical plug-in and where to put the extra cord so the tray would go back in
Was this helpful?
Thank you for voting!
Icemaker quit making ice.
0 of 1 people
found this instruction helpful.
-
Don from Mattoon, IL
- Easy
- 15 - 30 mins
-
Nutdriver
The parts were here the next day. After removing the old ice maker it was a simple installation using the adapter cord furnished. It took about 15 minutes. You have to work with the cord some to get it to fit behind the ice maker, but it does fit. The ice maker started up immediately & works great.
Was this helpful?
Thank you for voting!
The evaporator fan in the freezer compartment began making a loud noise.
0 of 1 people
found this instruction helpful.
-
Boyd from Rapid City, SD
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
I found a replacement evaporator fan motor and 2 mounting bracket grommets at PartSelect.com at a reasonable price. I watched the installation video provided and installed the new parts as shown in the video start to finish installation time 22 minutes.i
Was this helpful?
Thank you for voting!
ice cubes maker worked intermittently
0 of 2 people
found this instruction helpful.
-
john from Vero Beach, FL
- Easy
- 15 - 30 mins
-
Screw drivers
turn off water. turn off electricity. empty freezer section of frozen food. remove ice bucket. loosen two screws holding IM to wall of refrigerator. lift off icemaker, and then unplug it as you remove it. INSTALL new IM by: putting new water funnel onto new IM. attaching adapter cord to IM. plug in IM electrical cord to refrigerato
... Read more
r and then hang the new IM onto the two loosened screws on the refrig wall. Now tighten the two screws. the extra adapter electrical cord hangs below the new IM, but does not get in the way when you reinstall old ice bucket. reload food, turn on elec and water. PS. i had a crack in the casing of the new IM, so i got a new one, but that one was cracked too. so i just installed the second cracked one. hope it is not a problem.
Read less
Was this helpful?
Thank you for voting!
Stopped making ice
0 of 2 people
found this instruction helpful.
-
Todd from New Albany, IN
- Easy
- 15 - 30 mins
-
Socket set
The video on the site was very helpful. The repair was really easy. It was exactly the way the video showed how to do it. I would definitely use this site again to find parts, figure out the "how-to", and use for skematics of appliances. Thanks.
Was this helpful?
Thank you for voting!
Ice Maker quit working
0 of 2 people
found this instruction helpful.
-
Barbara from Woodston, KS
- Easy
- Less than 15 mins
-
Nutdriver
The instruction video was great, mine was easy than even the video showed it to be. I changed it out in less than 15 minutes and it works great. The niocve things I didn't have to wait for a repairman or my husband to fix the problem.
Was this helpful?
Thank you for voting!
No Ice
0 of 2 people
found this instruction helpful.
-
Joseph from Sayville, NY
- Easy
- Less than 15 mins
-
Nutdriver
REplaced old icemaker with a new one. Install simple, However that was not the problem. I then replaced the water valve. Still no ice. I check the electric connection was OK. THe problem was the elbow fitting on the top back of the refrigerater leading to the icemaker was blocked with ice.Cleared it and turned water faucet up all the way.
... Read more
Ice maker worked.
Read less
Was this helpful?
Thank you for voting!