3118 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken door shelf retainer
0 of 1 people
found this instruction helpful.
-
Bill from Prescott, AZ
- Really Easy
- Less than 15 mins
Just replace end cap and install. The beauty of this was the door was broken in the evening before July 4 when all retail had closed down early for the 4th weekend. I hit Part Select on the computer, scrolled down the partslist,looked at pictures and figured out from that the necessary piece I needed, hit the buy button and in less than 1
... Read more
0 minutes had an order placed. July 7 UPS was at the door with the parts and my reefer was back in business. NO service call and no extra charges!!! Thank You, PartSelect!!!!
Read less
Was this helpful?
Thank you for voting!
Ice maker would not work.
0 of 1 people
found this instruction helpful.
-
Craig from Hanna City, IL
- Really Easy
- Less than 15 mins
-
Nutdriver
Removed the Ice maker from the freezer because the light was not on. Disassembled ice maker, found printed circuit board had shorted across two posts because the board was black in that area. Bought new ice maker assembly, installed in less than five minutes, making Ice fine.
Was this helpful?
Thank you for voting!
This part broke for whatever reason, I do not know.
0 of 1 people
found this instruction helpful.
-
John D from Chevy Chase, MD
- Really Easy
- Less than 15 mins
-
Pliers
I needed a pliers to extract the shelf reatainer from its place in the door of the fridge.
I found the part in the partSelect catalog, ordered it, opened the box, and snapped the replacement part into place. I then popped the Shelf retainer back into place where it belonged.
Piece of cake.
I found the part in the partSelect catalog, ordered it, opened the box, and snapped the replacement part into place. I then popped the Shelf retainer back into place where it belonged.
Piece of cake.
Was this helpful?
Thank you for voting!
My Icemaker arm was broken. It didnt move up or down by itself.
0 of 1 people
found this instruction helpful.
-
Fred from Brooklyn, NY
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
I removed the ice tub. Removed the screw on the left side that holds closed the section where the icemaker plug is connected. Disconnected the plug. Then removed the bottom right screw. I was then able to remove the Icemaker by unhooking it from the bcak freeze wall. I disconnected the icemaker from the fan gaurd. Removed the icemaker co
... Read more
ver. unscrewed the 3 icemaker screws and opened up the chamber. removed the old Ejector Blade Drive Cam by removing the outer srew that hold the gear to the icemaker. changed the cam with the new one and reassembled everything.
Read less
Was this helpful?
Thank you for voting!
door shelf retainer broke off
0 of 1 people
found this instruction helpful.
-
Sheryl from Wyoming, MI
- Really Easy
- Less than 15 mins
First, I removed the broken end cap from refrigerator door. Then I snapped the new end cap into place. Repair took less than 5 minutes and required NO TOOLS! Easy!! Got my part in one day, Thanks.
Was this helpful?
Thank you for voting!
The end cap on the door shelf snapped off.
0 of 1 people
found this instruction helpful.
-
Miranda from Waterford, CT
- Really Easy
- Less than 15 mins
I pulled off the broken piece, ordered the new piece, and snapped it on. VERY SIMPLE.
Was this helpful?
Thank you for voting!
Light socket missing in refrigerator
1 of 4 people
found this instruction helpful.
-
Wayne from Issaquah, WA
- Really Easy
- Less than 15 mins
Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.
Was this helpful?
Thank you for voting!
Ice maker quit working, I took it apart and found a broken wire at the thermostat, soldered it back, but apparently it got too hot.
0 of 1 people
found this instruction helpful.
-
Mark J. from Alice, TX
- Really Easy
- Less than 15 mins
-
Nutdriver
It took longer to remove the ice bucket and frozen food than it did to replace the ice maker. Remove one screw with a 1/4" nut driver, slide outward and remove plug. transfer water tube to new unit. plug it in, slide into rear slots and install one screw. Replace ice bucket and frozen food, shut the door and hear ice falling in about 30
... Read more
min. Easy job! Great product! THANKS MJS
Read less
Was this helpful?
Thank you for voting!
new part was substitute/which was some what different and was hard to get tray back in because power cord would not let it
0 of 1 people
found this instruction helpful.
-
Dudley from North Little Rock, AR
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers
i did every thing according to instructionwhich was simple but it did not cover how to use the extension electrical plug-in and where to put the extra cord so the tray would go back in
Was this helpful?
Thank you for voting!
replaced the ice maker
0 of 1 people
found this instruction helpful.
-
Opie from Carrollton, GA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
I ordered the replacement from you guys, got the new ice maker and the plug had an adapter, but it wouldnt fit in with everything. So I cut the plug off my old ice maker and put it on the new one and it works just fine.
thanks for everthing P.S. i got the ice maker from you for 109.00 and sears wanted 130.00 for it
good stuff g ... Read more ood deal.
thanks for everthing P.S. i got the ice maker from you for 109.00 and sears wanted 130.00 for it
good stuff g ... Read more ood deal.
Read less
Was this helpful?
Thank you for voting!
We can't seem to get the dripping water stopped when the water fills the ice maker. The large hole in the plastic we covered, but it still drips some. So we may try epoxy. An easy job we thought, but we have this water problem.
2 of 7 people
found this instruction helpful.
-
Barbara from Columbus, OH
- Difficult
- 1- 2 hours
-
Screw drivers
A friend had no problem getting the new ice maker in. But then the problems started. The ice maker works great. But when the water fills the ice maker it squirts water onto the side of the freezer and ice sickles form. So we watched and decided the hole was too large so used a piece of plastic. That helped to cover the hole. But some wate
... Read more
r is still entering the freezer and not all going to the ice maker. The only other thing we can think to try is to use epoxy to try to close that place. A simple job has turned into a big headache. I wish they made the ice maker like the original one.
Read less
Was this helpful?
Thank you for voting!
Stopped making ice
0 of 2 people
found this instruction helpful.
-
Todd from New Albany, IN
- Easy
- 15 - 30 mins
-
Socket set
The video on the site was very helpful. The repair was really easy. It was exactly the way the video showed how to do it. I would definitely use this site again to find parts, figure out the "how-to", and use for skematics of appliances. Thanks.
Was this helpful?
Thank you for voting!
Broken shelf support on the refrigator door
0 of 2 people
found this instruction helpful.
-
Matthew from Philaelphia, PA
- Really Easy
- Less than 15 mins
I matched the part I needed throught your web site. Then I called and spoke to a customer support person, and gave my personal information to her. I do not like giving my credit card numbers over the internet. Your site allows me to do that.
Was this helpful?
Thank you for voting!
No Ice
0 of 2 people
found this instruction helpful.
-
Joseph from Sayville, NY
- Easy
- Less than 15 mins
-
Nutdriver
REplaced old icemaker with a new one. Install simple, However that was not the problem. I then replaced the water valve. Still no ice. I check the electric connection was OK. THe problem was the elbow fitting on the top back of the refrigerater leading to the icemaker was blocked with ice.Cleared it and turned water faucet up all the way.
... Read more
Ice maker worked.
Read less
Was this helpful?
Thank you for voting!
Ice Maker quit working
0 of 2 people
found this instruction helpful.
-
Barbara from Woodston, KS
- Easy
- Less than 15 mins
-
Nutdriver
The instruction video was great, mine was easy than even the video showed it to be. I changed it out in less than 15 minutes and it works great. The niocve things I didn't have to wait for a repairman or my husband to fix the problem.
Was this helpful?
Thank you for voting!