3118 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
ice maker not calling for water to make ice.
1 of 3 people
found this instruction helpful.
-
Sharon from Medway, MA
- Really Easy
- Less than 15 mins
-
Nutdriver
I removed the screws that held the unit in place, and also the screws that held a plate that covered where the unit plugs in. I unplugged the unit, and removed it. Put the new one in, reversing the steps. Turned the new unit on, and had ice in 45 minutes! Summer is coming, I need my ice maker! This is the second unit I have replaced on th
... Read more
is refrigerator, the first one was not releasing the cubes. This second one was a different style than the first, but same install process.
Read less
Was this helpful?
Thank you for voting!
ICE MAKER gave out after 20 years
2 of 6 people
found this instruction helpful.
-
Robert from new city, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
TURN WATER OFF TO REFRIDGE. TURN OFF ELECTRICITY.
Remove old ice maker (AFTER REMOVING THE BIG ICE TRAY) by disengaging two philips head screws but don't totally unscrew them. You must then totaly unscrew the bottom screw below the top two screws. Unplug the 5 head connection. (electricity)
Use adapter for t ... Read more he electrcity, etc from the box, (five head connection) Use the old plastic hose to hit the new cup. TIGHTEN TOP SREWS. LEVEL BY EYE. Turn the system on. Prime with some fresh water.
PS make sure that the light is on (green) and you will be in ice city. Be careful not to disengage the elcectic head when replacing the big ice tray.
HAVE A COCKTAIL!
Remove old ice maker (AFTER REMOVING THE BIG ICE TRAY) by disengaging two philips head screws but don't totally unscrew them. You must then totaly unscrew the bottom screw below the top two screws. Unplug the 5 head connection. (electricity)
Use adapter for t ... Read more he electrcity, etc from the box, (five head connection) Use the old plastic hose to hit the new cup. TIGHTEN TOP SREWS. LEVEL BY EYE. Turn the system on. Prime with some fresh water.
PS make sure that the light is on (green) and you will be in ice city. Be careful not to disengage the elcectic head when replacing the big ice tray.
HAVE A COCKTAIL!
Read less
Was this helpful?
Thank you for voting!
Old ice-maker went SOUTH
1 of 3 people
found this instruction helpful.
-
William E. from Centennial, CO
- Really Easy
- 15 - 30 mins
-
Screw drivers
If a 74 year old guy can install an ice-maker in a 20 + year old fridge in 20, or so, minutes it must have had good pictures and BIG PRINT. Working quite well at this time!
Was this helpful?
Thank you for voting!
No ice in hopper
3 of 9 people
found this instruction helpful.
-
Steve from Tulare, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver
Ice hopper had no ice in it. But water in door worked and if I added ice to hopper, it would dispense in door. I added water to ice maker but no ice was made. Replaced ice maker and all it required was to unplug harness and remove two screws with nut driver. Easy!
Was this helpful?
Thank you for voting!
Ice Maker Leaked Water
1 of 3 people
found this instruction helpful.
-
Lynn from Elkton, MD
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed Ice Maker (2-Bolts)
Removed Ice Tray Screw Motor (to get to Ice Maker Plug- 4 small screws)
Installed new Ice Maker and reinstalled Ice Maker Screw Motor
Extreamly easy
Removed Ice Tray Screw Motor (to get to Ice Maker Plug- 4 small screws)
Installed new Ice Maker and reinstalled Ice Maker Screw Motor
Extreamly easy
Was this helpful?
Thank you for voting!
Ice maker stopped working; would not fill
0 of 1 people
found this instruction helpful.
-
William from Darien, CT
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
It was as easy as the instructions were clear (and they were). Remove 2 screws and two nuts, pop out the old ice maker, pop in the new, plug in and tighten screws/bolts. It worked. I'm happy.
Was this helpful?
Thank you for voting!
The evaporator fan in the freezer compartment began making a loud noise.
0 of 1 people
found this instruction helpful.
-
Boyd from Rapid City, SD
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
I found a replacement evaporator fan motor and 2 mounting bracket grommets at PartSelect.com at a reasonable price. I watched the installation video provided and installed the new parts as shown in the video start to finish installation time 22 minutes.i
Was this helpful?
Thank you for voting!
Icemaker stopped cycling and wouldn't make ice
0 of 1 people
found this instruction helpful.
-
Alan from Raleigh, NC
- Really Easy
- 15 - 30 mins
-
Screw drivers
I removed the lower screw (not needed for the new icemaker), loosened the 2 top screws, unplugged the wire harness and removed the old icemaker. Unpacked the new icemaker assembly from the box, wiped the ice cube depressions to remove any debris, snapped on the water tube adapter, hung the new assembly on the 2 loosened upper screws and t
... Read more
ightened the screws. The wire harness required the supplied pigtail plug which made the wire assembly long and awkward to replace the ice bucket/dispenser assembly, plugged it in and was done. It took a total of about 10 minutes for the entire operation and had a full bin of ice cubes within 36 hours and was ready for the ice dispenser/crusher in the freezer door. Easy install!
Read less
Was this helpful?
Thank you for voting!
old ice maker quit
0 of 1 people
found this instruction helpful.
-
Ben from Northville, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
removed old ice maker, obtained part number from it. went on line ordered new ice maker at 10:45 in the morning, at 3:00 the nexte after noon new icemaker was in hand. took about 5 minutes to install new ice maker. works perfect. would do business again with this company.
Was this helpful?
Thank you for voting!
Icemaker quit making ice.
0 of 1 people
found this instruction helpful.
-
Don from Mattoon, IL
- Easy
- 15 - 30 mins
-
Nutdriver
The parts were here the next day. After removing the old ice maker it was a simple installation using the adapter cord furnished. It took about 15 minutes. You have to work with the cord some to get it to fit behind the ice maker, but it does fit. The ice maker started up immediately & works great.
Was this helpful?
Thank you for voting!
Take out old ice maker and replace with new
0 of 1 people
found this instruction helpful.
-
Gerald from Bismarck, ND
- Really Easy
- 15 - 30 mins
-
Nutdriver
Used the nutdriver to loosen two screws, life out ice maker, disconnect electric plug and put aside. Placed the new icemaker on the loosened screws, plugged in electric connector and tightened screws. Used small level to verify that unit was level.Waited about two hours for first cubes to be released into tray - has been working fine si
... Read more
nce!
Read less
Was this helpful?
Thank you for voting!
door shelf cap was broken and shelf fell off the door
0 of 1 people
found this instruction helpful.
-
Lynn from Montvale, NJ
- Really Easy
- Less than 15 mins
-
Pliers
Removed the broken part with a pliers.
Inserted end cap into shelf, then into door.
PERFECT!!!
Thank you
Inserted end cap into shelf, then into door.
PERFECT!!!
Thank you
Was this helpful?
Thank you for voting!
Icemaker Wouldn't Totally Work
0 of 1 people
found this instruction helpful.
-
KEVIN from MITCHELL, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Loosened 2 screws unplugged cable. Plugged in cable adapter on new unit. Plugged in to receptical, hung on 2 screws, tightened 2 screws. Done
Was this helpful?
Thank you for voting!
Our icemaker quit working.
0 of 1 people
found this instruction helpful.
-
Robin from Georgetown, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband took the old icemaker out before the new one came in. When the new one arrived, I installed it in less than 10 minutes.
Was this helpful?
Thank you for voting!
The retainer latch broke
0 of 1 people
found this instruction helpful.
-
Gary from Clayton, NY
- Really Easy
- Less than 15 mins
Removed the shelf retainer and snapped the new one in. and reinstalled the shelf on the door.
This was a very simple problem!
What really impressed me was that I ordered the part from you before noon on one day and received it by 11 AM the next day!!!
This was a very simple problem!
What really impressed me was that I ordered the part from you before noon on one day and received it by 11 AM the next day!!!
Was this helpful?
Thank you for voting!