EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31-65 Tappan Range - Instructions

All Instructions for the 31-65
61 - 75 of 275

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Element would not heat up
3 of 3 people found this instruction helpful.
  • david from BUCKEYE, AZ
  • Very Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I couldn't explain how to do the job any better than your instructional video does. As long as you follow the video instructions you should have no problems.
Was this helpful?
Thank you for voting!
Oven wires arced and caused the terminal block to melt and become detached from the back of the range
3 of 3 people found this instruction helpful.
  • Daniel from Falmouth, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Wrench set
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely.
Once all was replaced and reinstalled the oven has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
Was this helpful?
Thank you for voting!
Drip bowels needed to be replaced
3 of 3 people found this instruction helpful.
  • Francine from OTEGO, NY
  • Very Easy
  • Less than 15 mins
I just took the old ones out and replaced them with the new ones. It took less than 5 minutes.
Was this helpful?
Thank you for voting!
element had been damaged
4 of 7 people found this instruction helpful.
  • Merle from Towanda, PA
  • Really Easy
  • Less than 15 mins
I unplugged the damaged element and plugged in the new one. It took less trhan 30 seconds and the unit worked just fine.
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 people found this instruction helpful.
  • Marilyn from Clearwater, FL
  • Easy
  • Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience with those in need of you services. Thanks. Marilyn Kasson
Was this helpful?
Thank you for voting!
The6" surface element I use the most broke. I then decided it was time to buy original replacement drop bowls, since the ones I had been buying never it correctly.
2 of 2 people found this instruction helpful.
  • Vitoria from SANDY VALLEY, NV
  • Very Easy
  • Less than 15 mins
Actually, a child of average intelligence can do this. Just pull the surface elements, take the old drip bowls, install the new ones and re-install the surface elements, including the brand new one I received.
Was this helpful?
Thank you for voting!
problem pulling out bottom tray on range
2 of 2 people found this instruction helpful.
  • rosetta from COLUMBIA, VA
  • Really Easy
  • Less than 15 mins
just put in slot
Was this helpful?
Thank you for voting!
Worn Drip Bowls
2 of 2 people found this instruction helpful.
  • River Oaks Town Homes from DES MOINES, IA
  • Very Easy
  • Less than 15 mins
Pulled out the old drip bowls and replaced with the new. A simple snap!
Was this helpful?
Thank you for voting!
Heating element for a frigidaire stove top broke
2 of 2 people found this instruction helpful.
  • Rebecca from ASHEVILLE, NC
  • Very Easy
  • Less than 15 mins
Got the shipment. Took it out of the package. Set it into the stove top. Tested to see if it worked, It did. Turned it off and took my dog for a walk.
Great company. Makes it easy for me order.
Was this helpful?
Thank you for voting!
Knobs for the three timers on the appliance console deteriorateddue to age.
3 of 5 people found this instruction helpful.
  • Vincent from Bonita Springs, FL
  • Really Easy
  • Less than 15 mins
The repair was very simple and easy. All I hqad to do was remove the old knobs and attach the new ones. No tool was required.
Was this helpful?
Thank you for voting!
Burner not heating up.
2 of 2 people found this instruction helpful.
  • Arlene from ERIE, IL
  • Very Easy
  • Less than 15 mins
Unpluged old one pluged new one in. So good to have a burner that all the coils heat up.
Was this helpful?
Thank you for voting!
Broiler element burnt out. It literally broke off & emitted white-hot sparks.
2 of 2 people found this instruction helpful.
  • MG from ENCINITAS, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers
First thing I did was turn off power to the range at the circuit breaker. The repair was generally easy with the exception that 1 screw holding the broiler element support was "welded" into the oven ceiling. I stripped the screw trying to get it out. Fortunately, I had a special tool that allows one to grip the outer edge of the screw w hile turning it --- and that's how I got it apart. Once the broiler element support was off, I removed 2 screws holding the broiler element itself to the oven wall and carefully pulled the broiler element out from the oven wall and detached the wire clips connecting the wires to the broiler element. I reattached the clips onto the new element and installed the new element back into the oven wall. I then reattached the broiler element support using a another screw (because I decimated the original one). I then turned the circuit breaker back on and turned the broiler on. Woila. My broiler works again! Special thanks to the people at this site who were very helpful in seeing to it I got the correct broiler element. The original ordered broiler element was delivered to the wrong address. The folks at this site sent me another one. To make a long story short, they saw to it I got the correct part. I highly recommend this site based on my experience with them.
Was this helpful?
Thank you for voting!
the burner stop working
2 of 2 people found this instruction helpful.
  • Anthony J from HAMMONTON, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Just followed the instructions
Was this helpful?
Thank you for voting!
Two burners did not heat
2 of 2 people found this instruction helpful.
  • Conan from Moline, IL
  • Easy
  • 30 - 60 mins
Pretty easy installation; you lift the top plate up and snip the wires maybe four inches away from the burner. Leave more wire than you think you need; once you get into it you'll realize you need more wire length than you think.

Then strip the remaining ends, twist them together with the provided caps, and use the heat shrink to hold it together. Remove the old terminal, replace it with the new ones, and you're good to go!

Remember to check that the wires are tight in the cap before heat shrinking, though. I had to get more shrink wrap in order to finish.
Was this helpful?
Thank you for voting!
Original terminal degraded and faulty
2 of 2 people found this instruction helpful.
  • Robert from PRAIRIEVILLE, LA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Turn off power, remove heat coil assembly and drip pan. Unscrew the terminal assembly from the range top. Cut back 3 inches on each terminal wire and strip insulation 3/8 inch. Terminal assembly should be with the short side of the black block (from the side securement hubs) facing toward the coil stems. Slide the shrink wrap onto each wire and Twist each old with each new wire using the wire nuts and slide the shrink wrap Over each. Using a hair dryer, heat gun, or open flame carefully shrink the wrap. Secure the terminal back in place on the range.
Was this helpful?
Thank you for voting!
All Instructions for the 31-65
61 - 75 of 275