31-65 Tappan Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
wiring was burnt off to burner
12 of 19 people
found this instruction helpful.
-
Margaret from Portage "BlueKnob", PA
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
The range, (1988 Tappan) was givin to the church by one of our members. While using it, --after a period of time-- the wire burnt off to one of the burners. Since the couple gave us a brand new top for the stove that was still in the box, we decided to fix the stove up.
Now, with new wiring to all four burners, new shiney drip pans ... Read more and,,,,a new top, we have a very new looking stove for in our church kitchen.
The parts I ordered from PartsSelect, came in just a few days of placing the order,
This is one site that I have wrote down in my address book for any future parts to items we may need.
Now, with new wiring to all four burners, new shiney drip pans ... Read more and,,,,a new top, we have a very new looking stove for in our church kitchen.
The parts I ordered from PartsSelect, came in just a few days of placing the order,
This is one site that I have wrote down in my address book for any future parts to items we may need.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Draw Glide Broken Off Bottom Drawer.
9 of 11 people
found this instruction helpful.
-
Kathleen from fall river, MA
- Really Easy
- Less than 15 mins
New part arrived, opened pkg. , Pulled drawer out. . . Snapped in new parts. . . . Done!! Saved myself $100. 00.
Was this helpful?
Thank you for voting!
replacement burner
10 of 15 people
found this instruction helpful.
-
Donna from Westfield, MA
- Really Easy
- Less than 15 mins
Just a replacement burner for my stove. No tools needed. Thank you for such a speedy delivery
Was this helpful?
Thank you for voting!
Old switch killed by a short between wires
9 of 12 people
found this instruction helpful.
-
Darren from San Diego, CA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Turn off the electricity
Remove knob
Unscrew old switch
Lift stovetop & prop
Remove wires from switch
Remove switch
Plug wires onto new switch
Put new switch in place
Shut stovetop
Screw new switch in place
Trim knob post
Put adapter on post
Put knob back on
Turn electricity ... Read more back on
Cook dinner :)
Remove knob
Unscrew old switch
Lift stovetop & prop
Remove wires from switch
Remove switch
Plug wires onto new switch
Put new switch in place
Shut stovetop
Screw new switch in place
Trim knob post
Put adapter on post
Put knob back on
Turn electricity ... Read more back on
Cook dinner :)
Read less
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 people
found this instruction helpful.
-
Lise from CEDAR GROVE, NJ
- Very Easy
- Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
our rental stove needed new drip bowls and heat elements
7 of 8 people
found this instruction helpful.
-
bobby from PARKER, AZ
- Very Easy
- Less than 15 mins
i at first had a hard time finding the model # on this older electric stove. i did a chat with a rep from partselect.com and they sent me a web site that showed me where to look for it. that helped a lot. found it and searched on partselect.com . they had just what was needed. the purchase was easy and shipping was fast. i was worried i
... Read more
t was going to be time consuming finding what i needed, not true once i found their web site. also, installation was easy.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Insulation was missing
8 of 12 people
found this instruction helpful.
-
Bryan from Holland, MI
- A Bit Difficult
- More than 2 hours
-
Nutdriver, Screw drivers
Apparently, the original insulation had been removed due to a mouse infestation-the unit had been in storage for a while. After removing about 50 screws, I had all the body panels off and cleaned out the interior of the stove then installed the new insulation. I put it all back together and hooked it up- works just like new. I only paid 6
... Read more
0 bucks for this oven, so all in all, not a bad deal.
Read less
Was this helpful?
Thank you for voting!
Needed new drip bowls.
7 of 9 people
found this instruction helpful.
-
Robert from Oradell, NJ
- Really Easy
- Less than 15 mins
Pulled out heating elements. Removed old drip bowls. Inserted new drip bowls and re-installed heating elements.
I was extremely pleased with the very quick delivery of needed parts.
I was extremely pleased with the very quick delivery of needed parts.
Other Parts Used:
Was this helpful?
Thank you for voting!
Oven racks rusted
11 of 21 people
found this instruction helpful.
-
Wendell from Ocala, FL
- Really Easy
- Less than 15 mins
Ordered new racks and replaced them.
Was this helpful?
Thank you for voting!
Broken Drawer Glide
6 of 6 people
found this instruction helpful.
-
Sharon from Hamlin, NY
- Really Easy
- Less than 15 mins
It snapped right into the drawer, was very easy
Was this helpful?
Thank you for voting!
Surface element didn't work
6 of 6 people
found this instruction helpful.
-
chris from DEWEY BEACH, DE
- Very Easy
- Less than 15 mins
Make sure whichever surface element you are to replace is OFF.Carefully remove surface element by pulling it out of socket and remove drip bowl. Cleaned area around range top and place new or old drip bowl in place. Line up drip bowl cutouts and place on range top and simply push in/plug (2 prongs)in new surface element and place on drip
... Read more
bowl. It's that easy! To install 2 new surface elements and drip bowls took less than 5 minutes.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
OLD STOVETOP COILS
6 of 6 people
found this instruction helpful.
-
SANDY from TOMAH, WI
- Very Easy
- Less than 15 mins
LOOKED FOR MODEL# OF STOVE.. ENTERED MODEL # IN PARTS.COM SEARCH.
MATCHED COIL AND DRIP PANS
ITEM NUMBERS AND SIZE.
PLACED ORDER.
ARRIVED FOLLOWING WEEK WELL PACKED.
PULLED OUT OLD COILS/DRIP PANS.
PLACE *NEW* DRIP PANS IN FIRST. THEN PUSH IN *NEW* COILS
**NO PAID INVOICE WAS RECEIVED**
We ... Read more d4/24/2024
MATCHED COIL AND DRIP PANS
ITEM NUMBERS AND SIZE.
PLACED ORDER.
ARRIVED FOLLOWING WEEK WELL PACKED.
PULLED OUT OLD COILS/DRIP PANS.
PLACE *NEW* DRIP PANS IN FIRST. THEN PUSH IN *NEW* COILS
**NO PAID INVOICE WAS RECEIVED**
We ... Read more d4/24/2024
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Element burned out
6 of 7 people
found this instruction helpful.
-
James from Colonial Beach, VA
- Easy
- 15 - 30 mins
-
Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. The I reversed the process to install the new element which was exactly the same as the burned out one.
At first I was on the verge of replacing the whole stove before I decided to google " ra ... Read more nge heating elements". I ordered the part from your company and it arrived promptly.
Needless to say, I am thrilled that I don't have to buy a new stove. This one now works perfectly!
At first I was on the verge of replacing the whole stove before I decided to google " ra ... Read more nge heating elements". I ordered the part from your company and it arrived promptly.
Needless to say, I am thrilled that I don't have to buy a new stove. This one now works perfectly!
Read less
Was this helpful?
Thank you for voting!
The elements were not heating up
6 of 8 people
found this instruction helpful.
-
Tanya from KALISPELL, MT
- Really Easy
- 15 - 30 mins
-
Screw drivers
It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!
Was this helpful?
Thank you for voting!
Push button oven light switch broke and fell inside the console.
5 of 6 people
found this instruction helpful.
-
Daniel from Evansdale, IA
- Easy
- 15 - 30 mins
-
Screw drivers
Determined how to proceed to disassemble the console. Unplugged the power cord, shut off the gas valve, removed six philips head screws from back panel and one philips head screw from side panel that held the front glass cover in place. Removed the nut off of the old switch body and the two oven control knobs and the timer/clock knob. Rem
... Read more
oved the front glass by pulling the right side forward and sliding it slightly to the right. Disconnected the two wires from the back of the old switch.Removed the nut holding the old switch body to the console frame. Replaced with the new switch and did a reassembly by backtracking my steps. I even remembered to clean both sides of the control console glass before reinstalling it. Placed the range back in position, checked it for level, plugged the power cord in and checked for the proper operation of the new switch, turned on the gas and checked for any possible leaks from moving the range. The switch was a perfect match. The picture on the grid paper background really helped in identifying the switch that I needed.
Read less
Was this helpful?
Thank you for voting!