22865 Lawn Mower - Parts

This authentic item is supplied directly from the original equipment manufacturer for use with Murray edgers and lawn mowers. The ring goes next to the flat washer and is made of metal. When replacing this part a set of pliers might be required during the installation process. It may become bent or broken and will need to be replaced. This item is priced as an individual replacement part.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

Keep in mind that this part is sold individually. The torsion spring is made of plastic and attaches to the rear door. A screwdriver, a set of pliers, a socket set, and a nutdriver might all be helpful during the installation of this part. It might break or bend over time and will need replacing. This genuine item is supplied by the original equipment manufacturer for use with Murray lawn mowers.

The Front Baffle is used to direct grass clippings underneath the deck, and attaches underneath the mower deck. This part comes in black and is rated as "Easy" to install. Installation requires a wrench set or socket set. Refer to your make, model and diagrams to check if this part is correct.

This is an authentic Murray replacement part that is sourced from the original manufacturer for use with walk-behind lawnmowers. The durable plastic chute connects to the side of the mower's deck and is used to guide the grass clippings as they are discharged. This item is available as an individual replacement part.

This Washer (.40.81 16g Flt) is a black, metal part, requiring a socket set to install. Installation is rated as "Easy". This washer can be used to provide a tight fit between connected components. It attaches onto the bell crank between the adjusting nut and cotter pin. Refer to your make, model and diagrams to check if this model is right for you.

Keep in mind this part is made of metal and is sold individually. The washer goes next to the extension spring. It may require a wrench during installation. Over time this part may break and will need to be replaced. This authentic item is supplied directly from the original equipment manufacturer for use with lawn tractors and lawn mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity.

This replacement wheel and tire assembly is used on Murray lawn mowers. It is supplied directly from original equipment manufacturer and it is sold individually. This wheel helps to support and move mower. This assembly consists of a plastic rim and a plastic tire. This is a simple and quick repair that should only require a wrench. • ...Read more Remove the hub cap and the locknut • Replace the old wheel with the new one • Secure it with a nut and a hub cap

This is a genuine replacement part sourced directly from the manufacturer. The belt is commonly found in Murray lawn mowers. This part is made of flexible rubber, and is used in conjunction with the pulleys to transfer power from the engine through the machine. You may require a wrench when replacing this product. This item is sold as an individual replacement part.

This replacement screw is supplied directly from the original equipment manufacturer for use with Murray walk-behind lawn mowers. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this part. This is a high-quality co...Read moremponent which is made of durable metal and it is sold individually, the washer is included.

This grass bag is an authentic OEM that is specially designed for Murray walk-behind lawn mowers. This bag is used to collects grass clippings that that are picked up from under the deck. Please note this is the fabric bag alone; the metal frame that secures it is sold separately.

Hgt adj-7 2022rb- 8