22865 Lawn Mower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

The Cutting Blade is a black, metal, individually sold blade which is used to cut grass. It attaches underneath the cutting deck under the mandrell shaft. Installation is rated as "Easy" and requires a socket set, and wrench set. If worn or damaged, the grass will not cut properly and the part should be replaced. Refer to your make, model...Read more and diagrams in order to determine if this is the correct part for your machine.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

The Drive Wheel attaches to the front axle shaft and is used to support and drive the lawn mower. This grey and black part is constructed of plastic and rubber, and will require a socket set to install. Installation is rated as "Easy". Refer to your make, model or diagrams to ensure this is the correct part for you.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The plastic pulley is used to guide the pathway of the mower's belt. This item is priced as a single part, please note two may be needed.

This genuine OEM lawn mower blade is designed to deliver clean, precise cutting performance for walk-behind mowers. Measuring approximately 22 inches in length (21-5/8 inches cutting length), it is made from durable steel for reliable strength and long-lasting use. Ideal for replacing a worn, bent, or damaged blade, it helps restore even cutting and maintain your mower’s performance.

This is an authentic Murray replacement part which is sourced directly from the original equipment manufacturer for use with walk-behind lawnmowers. It is the cable that stops the engine when the operator presence handle is released. Unfortunately, over time components can wear out or more commonly the connections at the ends can snap or ...Read morebreak. This durable rubber insulated cable is available as an individual part. Refer to the owner's manual and the appropriate diagrams for your model to ensure the proper repair procedure.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray and Snapper lawn mowers. This is an identical replacement for a missing or a faulty rear guard that was installed on a new unit. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the corre...Read morect location and application of this item. Keep in mind this high-quality rear guard is made of durable plastic and is sold individually.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This is a genuine OEM part which is made for use with Murray and Briggs and Stratton lawn mowers. It is the cable that engages the gear case to drive the equipment. Over time it may wear out or get damaged eventually requiring a replacement. Make sure to refer to the owner's manual and the appropriate diagrams for your model to ensure the...Read more correct repair procedure. Note, this high-quality rubber insulated control drive cable is sold individually.