22865 Lawn Mower - Parts

This is an authentic replacement part manufactured for use with Murray walk-behind lawnmowers. This special bracket is used to link the stop cable to the stop lever. This bracket is sold as an individual replacement part, please see model diagram for associative parts.

It is a genuine single blade which is supplied by the original manufacturer for use with Murray lawn mowers. Over time the blade may wear out or get damaged eventually requiring replacement to maintain a clean cut lawn. Dull or worn lawnmower blades can cause the grass blades to tear and fray causing a yellowish coloring to the top of the...Read more lawn. It is a high-quality component which is made of durable metal and is sold individually. Refer to the owner's manual for your model to ensure the correct repair procedure. You will need a wrench to remove and resecure the hardware that holds the blade.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

This is an authentic Murray replacement part manufactured for use with lawn mowers. The control cable is a special component which allows a user to turn the drive function on and off. Unfortunately, over time parts may wear out, get damaged or lost eventually requiring replacements. To ensure the correct repair procedure, refer to the own...Read moreer's manual and the diagrams for your model. Keep in mind this high-quality drive control cable is sold as an individual item.

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

This rear wheel and tire is an authentic Murray replacement part. It is compatible with many varying models of Murray lawn mowers. This part is OEM and guaranteed to fit your compatible mower's needs. It is made of plastic and rubber, and it should be replaced if it has been worn down. A socket set is needed to replace this part. To repl...Read moreace: -Remove nut securing wheel to axle using the socket set -Slide broken wheel off and replace with the new wheel -Place nut back on the axle to secure wheel in place

This OEM Washer (j.39-2.2 11G Fl), is a silver, metal part, requiring a wrench or socket set to install. Installation is rated as "Easy". This washer can be used as a spacer between the bottom of the blade and the blade bolt. It attaches on the blade bolt to support the blade. If broken due to fatigue/damage, you may hear a rattling sound...Read more underneath the cutting deck and should replace the part. Refer to your make, model and diagrams to check if this model is right for you.

This is an original replacement part that is manufactured for use with walk-behind lawnmowers. The side chute connects to the mower deck and is used to guide grass clippings out of the deck. This plastic side chute is available as an individual replacement part, please see model diagram for associative parts.

This ignition key is an authentic replacement part. It is sourced directly from original equipment manufacturer for use with Murray riding lawn mowers/tractors. This is a safety feature for unauthorized use of the mower. The key is inserted into the switch and it allows you to start the unit. Includes two (2) metal ignition keys.

This is an authentic item that is supplied directly from the original equipment manufacturer for use with Murray walk-behind lawn mowers. It is the main drive belt which helps to rotate the blade, over time the material may wear out and begin to stretch eventually requiring a replacement to ensure peak performance. This high-quality component is made of durable rubber and is sold individually.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This item has been sourced from the original manufacturer to be used with walk-behind lawnmowers from Murray. The plastic cable fastener attaches to the lower handle. This item is used to secure the cable to the handle shaft to keep the cable secure and out of the way. This item is sold as an individual replacement part.