22314 (1988) Kenmore Range - Instructions

easy enough. Before you start, draw a picture of where the wires go on the old switch ( or take a picture).

Replaced the control.

Unpacked the new cooktop, plugged the module into the outlet. Done.

It was easy enough I unplugged the stove. removed the screws under the control panel,removed the panel, removed the two screws holding the switch in place. moved the electrical wires from the old switch and placed them on the new switch. put it all back together in the reverse order.
it took greater than 15 minutes as this is the first time I did any work on my stove and wanted to be careful and not dismantle too much or scratch anything.

All I had to do was remove the old insert with the two burners in it and clean under it, then insert the new one! It was really simple. I didn't even need my husband to help!

just wanted another set of burners before Thanksgiving or Christmas rolled around and all I have ever had was two plus the grill part of my Jenn-Air. But I did find your site very easy to use and the delivery was very prompt and the packaging was wonderful. I have bookedmarked your site so that if I need anything again for my kitchen I will look at you first.

It was so easy. I just unplugged the old catridge and plugged the new one. Thanks for the fast and great service at a competetive price. I am a very satisfied customer who will definitely be returning and recommending your service.

I took them out of the box, Took the old Elements out and put the new ones in, It was a piece of Cake, You have wonderful girl working for you, she was just great. thanks for the good service. my range looks like a new now. Nora

Changed out surface burner switch.Unscrewed two screws, changed plug onto new switch.Don't forget to turn off power!

Just plugged it in

Searched on the Web for the prt number printed on the cartridge itself. Found Partselect, and liked availability, price and delivery.

Replacement was literally a 30-sec task, without tools.

Works perfectly, spousal unit happy, more hot dinners ready when I am!

Took out the old, Put in the new

Repair was very easy for anyone to do,Just lift the old element cartridge up and pull out,And insert new the one! Very simple it took less than two minutes.The New element cartridge(stainless steel) Fits perfectly and functions perfectly.Ordered parts on a Saturday and they arrived Monday! impressive!!

Looked up schematic. Removed 3 screws holding cover. after I shut power off of course. Took off knob. Oriented new control to the one on panel. Disconnected each wire one at at time and immediately attached it to the new control for each wire. Removed screws holding old control and inserted and screwed to the new control and put the knob back on. Put the cover back on. Worked fine. Probably should replace the others as they don't turn as easily as the new one. Probably will spray some contact cleaner which will give me a few more years.

switch power supply off at breaker panel

unscrew control box assembly from stove

slide control out of stove

unscrew burner control out of assembly

transfer wiring from old control to new in same relative location

reassemble in reverse order

restore power

test burner in all positions