My Orders
- Home
- 1069650412
- Instructions
1069650412 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken butter door
2 of 2 people
found this instruction helpful.
-
Barbara from FERN BCH, FL
- Very Easy
- Less than 15 mins
I popped the new one right in.
Was this helpful?
Thank you for voting!
My crisper cover frame broke
2 of 2 people
found this instruction helpful.
-
Linda from ROCK ISLAND, IL
- Very Easy
- Less than 15 mins
It was very easy just took out the old broken crisper cover frame out and put in the new one. Simple as that.
Was this helpful?
Thank you for voting!
Faulty light socket
3 of 5 people
found this instruction helpful.
-
Larry from HOUSTON, TX
- Very Easy
- 15 - 30 mins
-
Screw drivers
Followed the video instructions.
Was this helpful?
Thank you for voting!
Drain clogging causing water to leak bottom of fridge
2 of 2 people
found this instruction helpful.
-
Ted C from DSRT HOT SPGS, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver
After watching videos how to replace went very easy.removed ice maker cut wires replaced switch put back together now working ok so far.
Was this helpful?
Thank you for voting!
OLDER Ice Maker on the fritz
6 of 14 people
found this instruction helpful.
-
Eric S from Boca Raton, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver, Wrench set
Grat help on the phone. We saw repair on YouTube. my wife and I worked it together. It was child's play!! It went beautifully. we were able to "chill out" with ice aplenty!!Thanks...eric
Was this helpful?
Thank you for voting!
Cimpressor would not start
5 of 11 people
found this instruction helpful.
-
Oliver from Madison, AL
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Checked compressor with amp meter, and found it was not running, found Overload Switch bad.
When removing old switch watch carefully which lug you move wires from, so you will know which
lug to put the new switch on.
BE SURE YOU KNOW SOMETHING ABOUT
ELECTRICITY!!
When removing old switch watch carefully which lug you move wires from, so you will know which
lug to put the new switch on.
BE SURE YOU KNOW SOMETHING ABOUT
ELECTRICITY!!
Was this helpful?
Thank you for voting!
Broken crisper frame
2 of 2 people
found this instruction helpful.
-
ROGER from GREER, SC
- Really Easy
- Less than 15 mins
Replaced frame
Was this helpful?
Thank you for voting!
Door would pop open. I cleaned gasket made sure nothing in the way of door. Gasket was cracked top and bottom it worked better but the seal was not good.
2 of 2 people
found this instruction helpful.
-
Roy from KAUFMAN, TX
- Really Easy
- 30 - 60 mins
-
Nutdriver
Did just like the video showed took doors off daughter helped take off doors so easy put door on blanket. My daughter 38 went to town putting it on just watch the corners so easy two days after installation the door seals great. You can do this.
Was this helpful?
Thank you for voting!
ice maker
2 of 2 people
found this instruction helpful.
-
Ann from MC CUNE, KS
- Really Easy
- 30 - 60 mins
My husband is an appliance man and he did the work.
Was this helpful?
Thank you for voting!
cut old off the door and put new on the door
7 of 17 people
found this instruction helpful.
-
George from Albakurky, NM
- Easy
- 30 - 60 mins
-
Socket set
took door of the refergarator. Then cut old gusket of and clipped the new one on and then put the back. Done!!!!!
Was this helpful?
Thank you for voting!
Ice buildup in freezer causing leaking water into fridge section
2 of 2 people
found this instruction helpful.
-
Diane from Brighton, MI
- Very Easy
- 30 - 60 mins
-
Nutdriver, Pliers
In my case the defrost thermostat was not the problem. Not worth going through the hassle of checking the thermostat as I would have had to cut it out and test it in another freezer (while the food that was in the freezer was being stored elsewhere). I just ended up buying it and replacing it. So, like I said the defrost thermostat was NO
... Read more
T the issue. I ended up getting a drain tube heater strap, and have been keeping my eye on the fridge. It hasn't been long enough to say the strap fixed the problem, but all indications are pointing to that being the case.
Read less
Was this helpful?
Thank you for voting!
install ice maker with all parts for refridgerator with no ice cube hardware on it.
2 of 2 people
found this instruction helpful.
-
Vincent from THE VILLAGES, FL
- Really Easy
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I followed the directions and it worked.
Was this helpful?
Thank you for voting!
freezer (later fridge too) wouldn't stay cold~
2 of 3 people
found this instruction helpful.
-
David from MARYLAND HTS, MO
- Very Easy
- 30 - 60 mins
-
Nutdriver
****Make are you order Capacitor & Starter relay too (we ordered separtely so had to pay shipping twice)**** Super easy just open access panel on back near compressor and remove retention clip with fingers, remove & replace both capacitor & starter, put clip and acce
... Read more
ss panel back on, plug in and allow 8 hours to cool! Works like new again! Hope it goes another 10 years
Read less
Was this helpful?
Thank you for voting!
Drawer cracked/split
4 of 9 people
found this instruction helpful.
-
Yvonne from Fredericksburg, VA
- Really Easy
- Less than 15 mins
I just slipped the new drawer into place. So easy, even a woman can do it! ( I am female!)
Was this helpful?
Thank you for voting!
none
2 of 3 people
found this instruction helpful.
-
Joseph from BONITA SPGS, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
install ice maker 2 screws wire harness pluged in done
Was this helpful?
Thank you for voting!