03021 - Parts

This rear bearing cover is designed to protect and insulate the rear bearing of the engine. It is an authentic OEM replacement part with a diameter of approximately 8 inches. It comes with a center/dust cap for easy access to the bearing. The cover acts as a barrier that prevents dirt and other contaminants from entering the bearing and p...Read moreotentially damaging it. It also protects the bearing from harsh environmental conditions and keeps it adequately lubricated. Over time, the cover may crack or break, leaving the bearing exposed. A faulty cover will result in several issues such as excessive noise and vibration, increased friction and wear, overheating, and lower overall equipment efficiency. To complete this repair, pry the center cap off first and then detach the old cover from the rear bearing. Clean the mating surface, align the new cover with the bearing, and snap the center cap into position.

The OEM vibration mount is a black rubber part, which is used to prevent vibrations between the frame of the generator and the floor. It can be installed with a screw driver,and its installation is rated as "Easy" by customers. It is installed on the bottom of the frame, facing the ground. If broken due to general wear/fatigue, there will...Read more be a noticeable vibration and the part may be tilted to one side. If this happens, the part should be replaced. Refer to your model, make and diagram in order to ensure this is the correct part.

This is a genuine manufacturer-sourced part that is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is generally utilized to provide an air-tight seal for the carburetor, please make sure to check the diagrams of your model for the correct location and application of this har...Read moredware. Unfortunately, over time gasket material may deteriorate and crack eventually requiring replacement. This high-quality part is made of durable material and is sold individually.

A genuine item which is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is a high-quality replacement for a missing or damaged cover for the ratchet clutch, please make sure to check the appropriate diagrams of your model for the correc...Read moret location and application of this hardware. Keep in mind this durable part is made of metal and is sold individually.

This is an authentic replacement part manufactured for use with Briggs & Stratton small engines. The special retainer is commonly used as spacing between the head of the valve and the valve spring. The retainer is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine OEM sourced part which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty bolt that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind t...Read morehis high-quality hex bolt is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This is a genuine Briggs and Stratton part for use with Engine, Lawn Mowers, Snow Blowers, Leaf Blowers / Vacuums, Tillers, Generators, Lawn Tractors, and Chipper Shredders. The recoil starter ratchet clutch attaches to the starter reel and provides tension against the ratchet when starter rope is being pulled. The most common reason for ...Read morereplacing the recoil starter ratchet clutch is if broken or damaged. This part is sold individually.

This is a genuine OEM part. The bell crank link is made for use with many small engines, and is sold individually. This item is constructed of heavy-duty metal, and is sold individually. You may need a wrench, hex key and pliers to make the replacement. For further repair instructions, please refer to the specific manual.

This is an authentic OEM sourced part which is specially made for DeWALT planers. It functions as a safety device. When the circuit becomes overloaded, this circuit breaker switch interrupts the transfer of electricity to the motor. Flip the switch on the circuit breaker to reset the connection. Please make sure to refer to the appropriat...Read moree diagrams for your model for the correct location and application of this component. Keep in mind this high-quality circuit breaker is sold as an individual item.