Hotpoint Microwave Motors
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Hotpoint Microwave Motors
Your Price
$40.02
In Stock
Hotpoint Microwave Drive Motor
PartSelect Number PS237772
Manufacturer Part Number WB26X10038
This is a microwave turntable drive motor. This is a genuine OEM replacement part. It accepts a D-shaped drive shaft. The drive motor is located under the glass microwave turntable, and allows the turntable plate to rotate while the appliance is in use. Your drive motor might be broken if it is noisy or does not turn at all. Be sure to disconnect power to the microwave before starting this repair. Simply unscrew the bottom plate and the drive motor of your microwave, disconnect the wires, and install the replacement part. This drive shaft is 21 volts, is about 2 inches in diameter, and is made of metal.
Fixes these symptoms
- Noisy
- Tray won’t turn
- Won’t turn on
- See more...
Installation Instructions
GERRY from BONITA SPRINGS, FL
Your Price
$98.54
In Stock
Hotpoint Microwave Motor, Turntable
PartSelect Number PS1020855
Manufacturer Part Number WB26X10193
Having trouble with your LG washer/dryer combo not performing as it should? Our Main PCB Assembly could be the answer you need to get your appliance back to peak performance. This genuine LG part is like the brain of your washer/dryer?it takes care of all the crucial tasks. From managing the wash and drying cycles to fine-tuning the temperature, this vital component ensures everything runs smoothly and efficiently. Before installing the Main PCB Assembly, remember safety first. Please make sure your machine is unplugged, and keep your hands secure by wearing a pair of sturdy gloves. Additionally, it's key to check that your washer/dryer combo is a good match for the Main PCB Assembly before purchase. With this handy little part, you can have confidence that your LG washer/dryer will soon be running as good as new, thanks to a fix that's been crafted directly by LG.
Fixes these symptoms
- Tray won’t turn
- See more...
Installation Instructions
Javin from Waltham, MA
Turntable did not turn when anything on top
Turn off the circuit breaker to the microwave. Remove the 4 black wood screws that secure the microwave to the cabinet. Pull the microwave all the way out and set it on something that leaves you access to the middle access panel on the bottom. Remove the access panel on the bottom that has one screw. Unhook the 2 cables to the motor remembering which color goes where. Remove the 2 screws for the motor and replace the motor. Finish up in reverse...
Read more...
Your Price
$23.60
In Stock
Hotpoint Microwave Stirrer Motor
PartSelect Number PS237771
Manufacturer Part Number WB26X10037
This motor has a square-shaped shaft. This part operates the stirrer fan in the microwave.
Fixes these symptoms
- Noisy
- See more...
Installation Instructions
MARK from VALLEJO, CA
Grinding Noise In Motor
Removed upper cover. Removed screws in cover plate & motor mount. Removed inner cover with pop screw inside microwave. Reversed procees to install new motor.
Read more...
Your Price
$59.47
In Stock
Hotpoint Microwave Turntable Motor
PartSelect Number PS12722592
Manufacturer Part Number WB26X32190
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.
Fixes these symptoms
- Tray won’t turn
- See more...
Your Price
$48.45
In Stock
Hotpoint Microwave Motor Synchronous
PartSelect Number PS3493480
Manufacturer Part Number WB26X10248
Your Price
$85.38
Special Order
Hotpoint Microwave Ventilation Motor
PartSelect Number PS16219541
Manufacturer Part Number WB26X36106
Your Price
$132.82
Special Order
Hotpoint Microwave Magnetron Fan Motor
PartSelect Number PS237836
Manufacturer Part Number WB26X10105
Installation Instructions
Richard from PORTER RANCH, CA
Microwave made squealing noise when on. Fan was worn out.
This particular microwave is the over the range type, with an exhaust fan at the top and charcoal filters over the stove. Then to the side is the control panel for the microwave oven. You have to get into this to get to the fan. To do this, you have to take off the vent trim at the top of the microwave. Two screws. Open the front door and gently wiggle once the screws are out. Care must be taken with this because over time the channels that the screws go in can break, and then once that happens there's nothing to hold the vent into the oven. (I've replaced this once when both screw openings simply crumbled). Once it's off, there is a screw under it at the top of the control panel that needs to come out. There's another screw at the bottom of the control panel. Then, you slide the panel up about a half inch and then you can pull it out. After that, you can see the fan in there. There are two screws holding it in and a bunch of wires all around it. Pull out the multipin connector on the fan. There is a second plug-in wire that you may need to use pliers to get a grip on it. Pulling out a couple other nearby wire connectors will help loosen it all up so that you can move the wiring harness out of the way and tilt the fan out and remove it. Looking at the old fan, the bearings were tight and worn out, and that was the problem. It's not a particularly well made fan. Very simple open-frame motor with moving parts exposed, so it probably through the years ingested oil vapor from cooking, etc. Tilt the new fan into position, put the two screws back in and re-insert the wire connectors. Then all you need to do once all the wiring is neatly dressed again is put the panel back on, the two screws top and bottom, and lastly reinstalling the long vent at the top, (two long screws). Do that, and you're done. The microwave sounds fine now and works great.
Read more...
Your Price
$60.51
Special Order
Your Price
$77.22
In Stock
Hotpoint Microwave Motor Circulation
PartSelect Number PS8754498
Manufacturer Part Number WB26X10270
MOTOR CIRCULATION
No Longer Available
Hotpoint Microwave Turntable Drive Motor
PartSelect Number PS237758
Manufacturer Part Number WB26X10024
Fixes these symptoms
- Tray won’t turn
- See more...
Installation Instructions
Stan from LOS ALAMOS, NM
Turntable drive moter making ratcheting sound
Removed power from unit. Removed 7 screws from cover on bottom of microwave. Unplugged the power connector from the installed motor. Removed 2 screws holding motor. Positioned new motor using small nibs used for purpose of proper positioning. Used mounting screws removed from old motor to firmly fix new motor in place. Installed original mounting screws holding bottom cover in place. Connected power and tested operation.
Read more...
Related Hotpoint Microwave Parts
- All Hotpoint Microwave parts
- Hotpoint Microwave Brackets and Flanges
- Hotpoint Microwave Caps and Lids
- Hotpoint Microwave Circuit Boards and Touch Pads
- Hotpoint Microwave Doors
- Hotpoint Microwave Electronics
- Hotpoint Microwave Fuses
- Hotpoint Microwave Handles and Latches
- Hotpoint Microwave Hardware
- Hotpoint Microwave Latches
- Hotpoint Microwave Lights and Bulbs
- Hotpoint Microwave Switches
- Hotpoint Microwave Thermostats
- Hotpoint Microwave Transformers
- Hotpoint Microwave Wire Plugs and Connectors