My Orders
Homelite Pressure Washer Parts
GET YOUR OFFICIAL Homelite PARTS TO ENSURE VICTORY
Popular Homelite Pressure Washer Parts
This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit will be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.
This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit will be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.
Installation Instructions
Duarte from GRISWOLD, CT
Must have froze over winter (stored in garage)
Repair was easy, however had to u tube issue for proper orientation of parts as it did not come with any instructions. Wished I had two as shipping was twice as much as part. Very satisfied.
This replacement spray wand is specially made for use with Ryobi pressure washers. It is supplied directly from original manufacturer and it is sold individually. This items connects to the pistol/gun and allows user to connect nozzles to change spray patterns. This is a commonly replaced part due to regular wear, damage or if it is lost. Replacing a wand is easy and does not require any tools.
This replacement spray wand is specially made for use with Ryobi pressure washers. It is supplied directly from original manufacturer and it is sold individually. This items connects to the pistol/gun and allows user to connect nozzles to change spray patterns. This is a commonly replaced part due to regular wear, damage or if it is lost. Replacing a wand is easy and does not require any tools.
This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is broken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.
This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is broken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.
This is a genuine Ryobi replacement high pressure hose that is supplied directly from original equipment manufacturer. It is specially designed for use with pressure washers. This high pressure hose is made out of rubber/plastic material. It is 25 ft long and it is sold individually. This hose can be used on pumps that produce up to 1700 PSI.
This is a genuine Ryobi replacement high pressure hose that is supplied directly from original equipment manufacturer. It is specially designed for use with pressure washers. This high pressure hose is made out of rubber/plastic material. It is 25 ft long and it is sold individually. This hose can be used on pumps that produce up to 1700 PSI.
(25 ft., 3000 psi)
This water hose is for pressure washers.
Water hose carries water from the pump to the spray wand.
Wear work gloves to protect your hands when installing this part.
(25 ft., 3000 psi)
This water hose is for pressure washers.
Water hose carries water from the pump to the spray wand.
Wear work gloves to protect your hands when installing this part.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This is an original part from Ryobi. The wheel is constructed of high-quality plastic, and is compatible with several pressure washers. This component is fitted on the main frame assembly, allowing the operator to easily move the cleaning device when needed. A flat head screwdriver and a mallet may be helpful for the removal and replacement. The wheel is sold individually.
This is an original part from Ryobi. The wheel is constructed of high-quality plastic, and is compatible with several pressure washers. This component is fitted on the main frame assembly, allowing the operator to easily move the cleaning device when needed. A flat head screwdriver and a mallet may be helpful for the removal and replacement. The wheel is sold individually.
It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.
It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.
Designed for electric pressure washers, this replacement pressure switch connects to the pump and helps control water pressure during use. It senses pressure changes within the pump system so the machine can operate as intended. A worn or damaged switch may lead to low pressure, uneven performance, or trouble starting the pump. Built with plastic, rubber, and metal components, the assembly is made to handle regular outdoor cleaning jobs. Pliers and a screwdriver may be needed for installation. Before starting the repair, unplug the pressure washer, turn off the water supply, and squeeze the spray trigger to release trapped pressure.
Designed for electric pressure washers, this replacement pressure switch connects to the pump and helps control water pressure during use. It senses pressure changes within the pump system so the machine can operate as intended. A worn or damaged switch may lead to low pressure, uneven performance, or trouble starting the pump. Built with plastic, rubber, and metal components, the assembly is made to handle regular outdoor cleaning jobs. Pliers and a screwdriver may be needed for installation. Before starting the repair, unplug the pressure washer, turn off the water supply, and squeeze the spray trigger to release trapped pressure.
This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. It is available as an individual replacement part, but also includes the metal bolt and the rubber o-ring.
This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. It is available as an individual replacement part, but also includes the metal bolt and the rubber o-ring.
Installation Instructions
Dianna from Lindrith, NM
The switch was bad
I popped off the old switch plug in the new switch with the wires put it back together and it worked like a charm
This is a genuine OEM replacement part for Homelite and Ryobi pressure washers. The switch is used to turn the machine on and off. This is a complete switch which is located inside of the motor housing. This is made of plastic and metal components and is sold as an individual replacement part.
This is a genuine OEM replacement part for Homelite and Ryobi pressure washers. The switch is used to turn the machine on and off. This is a complete switch which is located inside of the motor housing. This is made of plastic and metal components and is sold as an individual replacement part.