UT80993F Homelite Pressure Washer - Overview

This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit wil...Read morel be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.

This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal operating temperatures. Wear work gloves to protect your hands when installing this part.

This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is b...Read moreroken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.

(25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part.

This is an original part from Homelite. The push nut cap (1/2") is made for use with many pressure washers. The metal cap secures the wheel to the main frame assembly. This component is sold individually. A screwdriver and a pair of pliers may be needed for the installation.

This is an authentic OEM sourced replacement bolt which is specially designed for use with pressure washers. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams for the correct location and use of this item. This bolt is made of high-quality metal and it is sold individually.

This is an original replacement part designed for the Homelite and Ryobi pressure washers listed below. This is a low pressure nozzle which draws soap/chemical mixture from the detergent tank, and gently spray a light coat onto a surface for cleaning. This soap nozzle may also be called a chemical injector tip. One (1) nozzle is included.

This replacement soap tank is an authentic high quality item that is supplied from original equipment manufacturer for use with Homelite pressure washers. It is the main container that holds the soap, please note the blue tank cap is sold separately. This soap tank with outlets is made from durable plastic and it is sold individually. Rep...Read morelacing it is a simple task that should only require a wrench to remove the two bolts that secure it to the frame.

This is an authentic OEM sourced replacement part that is made for use with pressure washers. It is made of high-quality materials and is used to remove contaminants from the water that goes through the unit. Over time it may wear out and get clogged eventually requiring a replacement. Note, this durable filter screen is sold individually. Refer to the owner's manual for the correct application.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Homelite, Husky and Ryobi pressure washers. It is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this part. Keep in mind it is a high-quality hex bolt is made of durable metal and is sold individually.

The collar attaches to the spindle. This item is made out of plastic and metal and is sold individually. This is an authentic part from Ryobi and Homelite for use in pressure washers. An allen wrench might be necessary during the installation of this part. It will require replacing if it becomes broken.