UT80993B Homelite Pressure Washer - Overview

Detergent Suction Kit

★★★★★

★★★★★

(1)

This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your... Add to cart

Thermal Relief Valve

★★★★★

★★★★★

(1)

This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal oper...

Outlet Tube This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wan... Add to cart

Pressure Washer Water Hose (25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part. Add to cart

Inlet Tube This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. ... Add to cart

Push Cap Nut (1/2 In.)

★★★★★

★★★★★

(1)

This is an original part from Homelite. The push nut cap (1/2") is made for use with many pressure washers. The metal cap secures the wheel to the main frame assembly. This component is sold individua...

Bolt (m6 X 16 Mm) This is an authentic OEM sourced replacement bolt which is specially designed for use with pressure washers. It is a standard hardware which has multiple applications depending on the model of your un...

Soap Nozzle

★★★★★

★★★★★

(1)

This is an original replacement part designed for the Homelite and Ryobi pressure washers listed below. This is a low pressure nozzle which draws soap/chemical mixture from the detergent tank, and gen... Add to cart

SOAP TANK W/OUTLET

★★★★★

★★★★★

(1)

This replacement soap tank is an authentic high quality item that is supplied from original equipment manufacturer for use with Homelite pressure washers. It is the main container that holds the soap,...

Filter Screen This is an authentic OEM sourced replacement part that is made for use with pressure washers. It is made of high-quality materials and is used to remove contaminants from the water that goes through t...

Hex Bolt (M8 x 60 mm) This is a genuine manufacturer-sourced replacement part which is specially designed for use with Homelite, Husky and Ryobi pressure washers. It is a standard hardware which has multiple applications, ...

Handle w/Foam Add to cart